How do I figure out how many bags of concrete I need?

Cement wise i would pour the base at 5-1 so you'll need maybe 7 bags of cement. If you still want to pay a fortune to buy your ballast in small bags get the 25kg ones and you will need approx 30 bags.

three bagsIt takes three bags of mortar to lay 100 Block for Type N, Type S and Type M. How many Block can be laid with one bag of redi-mix mortar? You can lay ten block with one bag of redi-mix mortar. What size precast concrete steps do you carry?

400 bagsCement bags About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home.

45 bagsOriginally Answered: How many 80-pound bags of concrete does it take to make a yard? An 80# bag of concrete mix yields about . 6 cubic feet of concrete. So one cubic yard of concrete requires about 45 bags of mix.

The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab.

For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards.

A 60-pound bag yields . 017 cubic yards, and an 80-pound bag yields . 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

I normally use post hole diggers (6" diameter?) 3 feet deep and ½ a bag of redi-mix per post.

As I recall, a 60# bag of concrete is about .

5cf, so you'd need 3 bags per hole..

How many concrete bags would I need for a 8 ft x 8 ft x 6" slab? 54 x 80lb Concrete bags. How much does it cost to pour a 8'x8' x6" slab? Ready-mix costs approx $277.86.

22.222 cu. yds. How many concrete bags would I need for a 30 ft x 40 ft x 6" slab?

two bagsOur example post will require two bags for every post if you're using fast-setting concrete. Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow.

14.43 Bags of Cement is Required for Laying of 100m² Concrete Block.

I used three 80 pound bags of concrete mix to fill all of the 48" length of this 8" diameter tube form and had some concrete left over.

To figure out the how many tons you will need is not hard to do. You will have to know that the standard weight contractors use for crushed stone is 2700 pounds per cubic yard. Multiply the number of cubic yards by 2700 and divide by 2000. This value is the number of tons that you will need.

Calculate the volume of the hole in cubic metres (using V = πr2h) and then subtract the volume of your post. This will give you the volume of concrete required. Simply multiply the volume figure by 108 (108 bags per cubic metre) to give the amount of 20kg bags needed to fill the void.

How many concrete bags would I need for a 5 ft x 5 ft x 6" slab? 20.8 x 80lb Concrete bags.

For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield.

If you have concrete delivered it issold by the yard (which is a cubic yard = 27 cubicfeet). Secondly, how many 80lb bags of concrete are on a pallet? SAKRETE 80LB CONCRETE MIX 42 BAGS PERSKID.

You'll need a bit more than one 1 ton bags of ballast and around 6 bags of cement I reckon. A 1 ton bag is actually around 900Kg ish, so probably 40-45 bags at 25kg each is my guess. 1:4 ratio is quite strong, 1:6 would be fine - 12 shovels of ballast to 1/2 bag of cement.

As to how many bags....a 55 gallon drum filled clear to the top is actually closer to 60 gallons. And 60 gallons is 8 cu ft. So if you buy 60lb bags, those do 1/2 cu ft each so you would need 16 of them. IF you buy 80lb bags (2/3 cu ft) you would need 12 bags.

You will need 45 bags of concrete mix to make a cubic yard of concrete.

How Many Bags of Concrete do you Need?Bag SizePre-mix Bags Needed to Fill1/4 cu yd1/2 cu yd40 lb bags234560 lb bags153080 lb bags1223

How Much Concrete per Vinyl Fence Post?Post SizePost Height (above surface)80lb Bags Required4×43-4ft double-triple rail9 inch hole15×53-4ft double-triple rail12 inch hole15×55-6ft semi & privacy122

The area is 200 SF, which requires 225 blocks (1-1/8 x 200 = 225 blocks). Three bags of mortar are estimated for every 100 block, therefore 6-3/4 bags of mortar are needed ((225 block x 3 bags mortar) / 100 block = 6-3/4 bags of mortar).

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

Your project is 32 square feet at a depth of 4”. Here is the quantity that you will need for your slab. Quikrete Concrete Mix: 24- 60lb bags.

If there is a layer of water across the top, you've added too much. The rule of thumb is about 5 pounds of water to an 80 pound bag of concrete mix.

Cement, Sand and aggregate requirement for Different grade concreteGrade of ConcreteNominal Mix ProportionCement Required (bag)/cumM151:3:64.5M201:2:46M251:1.75:3.56.75M301:1.5:37.5

3 bagsFor laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m.

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that's an extra 8 60-pound bags or 6 80-pound bags.

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards.

2 Answers from MyBuilder Landscape Gardeners You need approximately 0.75 cubic metres of gear. A ton bag of sharp sand is around 0.5 cubic metres so 2 bags will be plenty and 10 cement.

The number of bags you need will vary depending on the type of concrete mix you choose for your project. If you're using 50lb bags of concrete, you'll need 72 bags to make a yard. If you're using 60lb bags of concrete, you'll need 60 bags to make a yard.

bag provides 0.6 cubic feet ofcured concrete. If you have concrete delivered it issold by the yard (which is a cubic yard = 27 cubicfeet). One may also ask, how many 80lb bags of concrete are on a pallet? SAKRETE 80LB CONCRETE MIX 42 BAGS PERSKID.

45 bagsPure cement, sand and crushed rock all have about the same density, so a block of pure cement measuring 1 cubic yard of volume (about 3,600 pounds) will contain 45 bags of cement.

5 Bags# It takes approximately 5 Bags of Portland cement, 8 cubic ft of sand, and 20 cubic ft of gravel to make approximately 1 cubic yard (27 cubic feet) of concrete.

Using a Concrete Calculator You'll also get the number of 40-pound, 60-pound, or 80-pound bags of concrete are needed for the project. For example, a 10′ x 10′ slab that is 4″ thick will need an estimated 1.23 yards3 or 75 60lb bags of concrete and will cost roughly $140.

A sack or "bag" of cement weighs 94 pounds so this tells us a 3000 psi concrete mix is also equal to a 5.5 sack mix of concrete.

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards.

Here is the quantity that you will need for your slab. Quikrete Concrete Mix: 24- 60lb bags.

How many stamps do I need for my project? Take your dimensions of your project and figure out which direction you will run your stamps. Next measure what your longest run will be. Ideally you want the enough stamps to cover your first row and 2 stamps for the second row.

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards.

They are 4 feet in height and 10 inches in width (diameter), or 4′ x 10″.Choose Round Column (or Round Slab) on the calculator.Enter Height 4 ft (or 48 in)Enter Diameter 10 in.Calculate and the answer is 0.08 cubic yards for one concrete tube.Multiply 0.08 x 50 = 4 total cubic yards of concrete for 50 tubes.More items...

One 80-lb bag of concrete yields . 60 cubic feet when combined with 4 quarts of water. If you're purchasing 80-lb bags of concrete, you'll need 1.66 bags of concrete.

How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards.

How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards..

An 80# bag of pre-mixed cement, sand and gravel (CONCRETE) is 0.6 cubic foot per the bag. There are 27 cubic feet in a cubic yard. So 27 / 0.6 = 45 80# bags.

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that's an extra 8 60-pound bags or 6 80-pound bags. Whatever the size of your project, use the formula above to calculate how much concrete you'll need!

For concrete, the formula for volume is as follows: length x width x thickness.

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield.

Use the following yields per each bag size: 40 pound bag yields .011 cubic yards..