Best answer

100mmThe minimum and recommended thicknesses of concrete slab for car hoists.

Garage Equipment's two and four post hoists require a minimum of 100mm (about 4”) of reinforced concrete slab to be safely installed..

Answered by: gregsdennis Date created: Jun 25, 2022

How thick should plaster skim be on plasterboard?

Asked By: Jens Schauder Date created: Jun 08, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set. Cover the entire surface in one go — don't stop halfway.

Answered By: Christofer Vilander Date created: Jun 08, 2022

How thick should plaster be on plasterboard?

Asked By: jmite Date created: Jun 16, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: markdorison Date created: Jun 18, 2022

How thick should a concrete slab be for a mobile home?

Asked By: Freewind Date created: Jun 23, 2022

4 to 6 inches

Answered By: Alexey Larionov Date created: Jun 23, 2022

How thick does a concrete slab need to be for a garage?

Asked By: Matt Hamilton Date created: Jun 23, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: jcuenod Date created: Jun 23, 2022

How thick should tile cement be?

Asked By: Anthony Williams Date created: Jun 25, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: itronic1990 Date created: Jun 28, 2022

How thick should a concrete slab be for a shed?

Asked By: Lei Yang Date created: Jun 19, 2022

Recommended Thickness of Concrete Slabs Shed Slabs: 3 1/2 inches thick. Shed floors that are being used for studio sheds or workshops will use a 3 1/2" thickness. Driveways: 4 inches, some areas require 5 inches. Many garage sheds need a driveway approaching the large shed door.

Answered By: Shyju Date created: Jun 21, 2022

How thick should concrete footings be?

Asked By: OMR Date created: Jun 08, 2022

Footing thickness - 8 to 12 inches. Footing depth - varies based on frost line and soil strength (some footings can be shallow, while other must be deep)

Answered By: Sergey Date created: Jun 08, 2022

How thick should a concrete driveway be?

Asked By: Benjol Date created: Jun 18, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: gdbj Date created: Jun 19, 2022

How thick does concrete need to be for heavy equipment?

Asked By: Martin Gal Date created: Jun 25, 2022

Six inchesSix inches of thickness should be more than adequate for areas where heavy equipment will be driven and parked. For lesser loads, four inches.

Answered By: Will Robertson Date created: Jun 27, 2022

Is car a concrete noun?

Asked By: Has QUIT--Anony-Mousse Date created: Jun 14, 2022

Just look around you, everything that you can see or touch is a concrete noun. For example: chair, table, car, book, desk, apple, baseball, pencil, notebook, laptop, phone.

Answered By: Blair Conrad Date created: Jun 15, 2022

Related Question Answers

Ben Jackson

Professor

How thick should a cement driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Devrath

Professor

Can concrete be joined?

You can join the new concrete right to the old concrete, this is called a concrete construction joint. The edge of the existing concrete that was sawed should be drilled and doweled so the new concrete won't separate, lift, or settle from the old concrete.

codeholic24

Professor

Does concrete ever cure?

Curing times for concrete Technically, concrete never stops curing. In fact, concrete gets stronger and stronger as time goes on. ... For domestic mixes – driveways, for example – you can expect the concrete to be set within 24-48 hours. But again, you should give it the full 28 days before using it to park the family car.

suhailvs

Professor

How do you lift a sunken concrete slab?

Mud Jacking is a common term for lifting sunken or settled concrete. Mud jacking can lift a settled concrete slab by pumping a grout through the concrete and pushing it up from below. The process is sometimes called “slab jacking” or “pressure grouting”.

Phillip Senn

Professor

How thick should a concrete slab be for a basketball court?

3500 PSIBase Material Many basketball courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance.

Jon Spring

Professional

How thick does the concrete need to be for a car lift?

100mmThe minimum and recommended thicknesses of concrete slab for car hoists. Garage Equipment's two and four post hoists require a minimum of 100mm (about 4”) of reinforced concrete slab to be safely installed.

junvar

Professional

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

darthbith

Professional

Can you lift concrete steps?

Concrete steps can often times be leveled instead of replaced. A-1 Concrete Leveling can lift and restore your uneven steps, using our patented concrete leveling and restoration process.

jalf

Professional

How thick should a concrete pool be?

between three and four inchesGenerally, the pool walls need to be between three and four inches thick. Smooth the pool walls with your trowel, as you did for the base. Now the concrete has to cure properly before you can fill it with water. The concrete curing process allows the concrete to reach maximum strength and takes approximately 28 days.

rdegges

User

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

DinkarKumar

User

How thick of concrete do you need for a 2-post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience.

Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed..

Zirak

User

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

Chris Lutz

Guest

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

Bram Vanroy

Guest

How thick should concrete be for 2 post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience. Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.

CAFxX

Guest

How thick should concrete resurfacer be?

1/2 inchUnlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

Mads Hansen

Guest

How thick does a concrete sidewalk need to be?

100mmSidewalks should be at least 4" (100mm) in thickness.

Simple slabs for small foundations, bases, etc., normally 4" to 6" (100mm to150mm) thick, depending on the load they must bear.

Slope the walk away from buildings to provide proper drainage..

teunbrand

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

Erik Eidt

Guest

How thick should a concrete drive be?

For a standard driveway your sub-base should be at least 100mm deep (the same depth as the concrete), rising to 150mm if you plan to park larger vehicles on it. The hardcore sub-base needs to be in place and compacted before any ready-mix concrete arrives.

Johannes

Guest

How thick should a concrete pool deck be?

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

Andrew Whitaker

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

coderanger

Guest

How long does 4 inches of concrete take to cure?

For domestic mixes – driveways, for example – you can expect the concrete to be set within 24-48 hours.

But again, you should give it the full 28 days before using it to park the family car..

guettli

Guest

How thick does concrete need to be to not crack?

4 inchesApplied-load cracking. In residential concrete, 4 inches is the minimum thickness for walkways and patios. Garage slabs and driveways should be 5 to 6 inches thick if any heavy truck traffic is anticipated, otherwise 4 inches is adequate.

WhiteHat

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

tokland

Guest

How thick should a reinforced concrete driveway be?

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

BoarGules

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

DaniP

Guest

How long should you leave concrete to set?

For domestic mixes – driveways, for example – you can expect the concrete to be set within 24-48 hours. But again, you should give it the full 28 days before using it to park the family car.

Mark Cidade

Guest

How much is a 10x20 concrete slab?

Garage Slab CostGarage Foundation Size4” Slab Cost6” Slab Cost1-car Garage (10x20)$1,062 – $1,662$1,366 – $2,0642-car Garage (20x20)$2,124 – $3,324$2,732 – $4,1283-car Garage (30x20)$3,156 – $4,986$4,098 – $6,192

Jon Limjap

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Fedor

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Tanmoy

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.

Samuel Everson

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

LarsTech

Guest

How long does it take 2 inches of concrete to dry?

For domestic mixes – driveways, for example – you can expect the concrete to be set within 24-48 hours. But again, you should give it the full 28 days before using it to park the family car.

pc_coder

Guest

How far apart should concrete piers be for a shed?

3-5 feetCement blocks are built in piers (think mini-towers–but they don't lean) 3-5 feet apart. If the sheds are built like they should be, the structure of the shed easily spans the piers–unless you're parking the car in it, in which case you'll want to consider a gravel pad.

tim_xyz

Guest

How big can a concrete slab be without expansion joints?

Usually, expansion joints should be no farther apart than 2 to 3 times (in feet) the total width of the concrete (in inches). So for a 4 inch thick concrete slab, expansion joints should be no more than 8 to 12 feet apart.

Jeterson Miranda Gomes

Guest

How much weight can a 4 inch concrete patio hold?

A typical residential patio is 4″ thick with an average of 3000 pounds per square inch ratio. It is designed to carry more than the weight of two automobiles. The average compact car is about 3,000 to 3,500 lbs. A mid size car, van or light truck is about 5,000 to 7,000 lbs.

Didier Spezia

Guest

How thick is a concrete driveway?

75-100mmConcrete paths should be 75-100mm thick, whereas drives, garage bases or hardstandings should be at least 100mm thick. For heavier use, such as large vans, use a 150-200mm thick concrete slab.

Joffrey

Guest

How thick should a concrete garage floor be?

Standard Thickness The standard concrete garage floor is six inches thick and, with use of proper control joints, should be thick enough to withstand normal use.

icza

Guest

How thick should a concrete shower pan be?

Thickness for Concrete Shower Pan – Base Layer The shower pan base mortar layer thickness should be approximately ½ to 1 inch thick. Since the shower floor already has a pre-slope, just apply a base mortar layer that has an even thickness throughout the shower floor area.

Farshid Ashouri

Guest

How thick should a concrete sunroom be?

Four inches is the minimum thickness for a concrete patio.

You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub..

Spacedman

Guest

How thick should a load bearing concrete wall be?

Therefore I recommend that all the walls should be at least 9 inch thick. 4.5-inch thick walls are not structurally safe if they are beyond 7 feet in height or carry some imposed load.

aF.

Guest

How thick should a stamped concrete patio be?

four inchesHow thick is stamped concrete? Our standard slab is a minimum of four inches. Some situations will require us to pour six inches of concrete, and this would be discussed before the project takes place.

palsch

Guest

How many inches thick should a concrete driveway be?

four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

GregL

Guest

How do you connect old concrete to new?

A. You can join the new concrete right to the old concrete, this is called a concrete construction joint. The edge of the existing concrete that was sawed should be drilled and doweled so the new concrete won't separate, lift, or settle from the old concrete.