Best answer

The average cost to pour a 30x40 concrete slab that is 6” thick with metal rebar reinforcements is between $8,196 and $12,384. This cost is based on a general purpose use such as a garage, whereas a foundation for a structure may cost more. Click to see full answer.

Answered by: Nadia Chibrikova Date created: Jun 24, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: Lizard Date created: Jun 23, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: ColinD Date created: Jun 26, 2022

How do I calculate how much concrete I need for a slab?

Asked By: Charlie Date created: Jun 09, 2022

CONCRETE CALCULATOR FORMULADetermine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•

Answered By: stema Date created: Jun 09, 2022

How much concrete do I need for a 12x20 slab?

Asked By: markdorison Date created: Jun 14, 2022

Concrete Extras With a brief look, a 12x20 area at 6 inches deep, you would need approximately 6.31 tons or 4.44 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Answered By: Jonas Date created: Jun 15, 2022

How many bags of concrete do I need for a 6x6 post?

Asked By: Muhammad Zahab Ahmad Khan Date created: Jun 13, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: Andy Hayden Date created: Jun 15, 2022

How much concrete do I need for a deck post?

Asked By: Anton Strogonoff Date created: Jun 10, 2022

One 80-lb bag of concrete yields . 60 cubic feet when combined with 4 quarts of water. If you're purchasing 80-lb bags of concrete, you'll need 1.66 bags of concrete. As before, since bags of concrete are only sold in whole quantities, you'll need to purchase two (2) 60-lb.

Answered By: iansedano Date created: Jun 12, 2022

How much sand and cement do I need for brickwork?

Asked By: cantdutchthis Date created: Jun 25, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: Damien_The_Unbeliever Date created: Jun 26, 2022

How much cement do I need for a brick wall?

Asked By: kostja Date created: Jun 11, 2022

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Answered By: Sven van den Boogaart Date created: Jun 11, 2022

How much sand and cement do I need for 100 blocks?

Asked By: Inian Date created: Jun 16, 2022

You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Answered By: einpoklum Date created: Jun 19, 2022

How much sand and cement do I need for 1000 blocks?

Asked By: jstl Date created: Jun 15, 2022

For laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.

Answered By: Ynetter Date created: Jun 16, 2022

How much sand and cement do I need for blocks?

Asked By: carlspring Date created: Jun 08, 2022

For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

Answered By: C Snover Date created: Jun 10, 2022

Related Question Answers

MBZ

Professor

How much concrete do I need for a 10x10 slab?

For a 10 x 10 slab, we'd suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

Alex Cohn

Professor

How much sand and cement do I need for a block wall?

For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

Gergo Erdosi

Professor

How much would a 30x40 concrete slab cost?

30x40 Garage Concrete Slab CostCONCRETECOST PER SQ FT*TOTAL COST*CONCRETE Standard 4" Concrete SlabCOST PER SQ FT* $6 - $7TOTAL COST* $7,200 - $8,400CONCRETE 6" Concrete SlabCOST PER SQ FT* $7 - $8TOTAL COST* $8,400 - $9,6001 more row•Jan 27, 2021

Pranay Rana

Professional

How do you take care of a concrete pool?

Special Care for Concrete Pools Besides maintaining a constant balance of chemicals in your water, you will need to keep the concrete itself clean. The best way to do that is by simply brushing the walls. You can use a hard bristled brush attached to a telescopic pole to brush the walls and floor of your pool.

Fizer Khan

User

How much cement do I need for a 20x20 slab?

With a brief look, a 20x20 area at 6 inches deep, you would need approximately 10.52 tons or 7.41 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Sergei Panfilov

User

How many bags of concrete do I need for a basketball court?

elevenThe recommended hole size is 16 inches in diameter and 48 inches deep. You will need eleven 80-lb bags of concrete for the installation. How much does it cost to install an in ground basketball hoop? On average, installation will cost around $450.00 for an in-ground system if you have it professionally installed.

vehomzzz

User

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

Antwane

Guest

How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

AminGolmahalle

Guest

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

mb21

Guest

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

David Liang

Guest

Can a pole barn have a concrete floor?

Concrete. One of the most popular pole barn flooring options is concrete. Concrete flooring can eliminate or reduce nearly all of the annoyances of dirt or gravel such as excess moisture, dirt and dust, and difficulty keeping the area clean.

Marc Audet

Guest

How much does a concrete pole barn cost?

Concrete is the most popular flooring choice for this type of building. Cost to add concrete flooring: $5-$10 per square foot. Installing wood flooring costs: $8-$12 per square foot.

Donal Fellows

Guest

How much does it cost to cement a pole barn?

It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That's based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.

Katriel

Guest

How much plaster do I need for a room?

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

Andreas Mueller

Guest

How much cement do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Ann Zen

Guest

How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Michael Liu

Guest

How much concrete do I need for Paver molds?

For a customized look, purchase powdered cement coloring to add to the concrete mixture. Here's how we made our lovely walkway with the mold. Determine the amount of concrete material needed for the project. Quikrete recommends one 80-pound bag of concrete for every 2 feet of walkway.

disinfor

Guest

How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

Marcos Casagrande

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Kirill Polishchuk

Guest

How much concrete do I need for fence posts?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

LinusGeffarth

Guest

How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly $6 to $11 per 100 square feet, considering you'll need $2 to $3 for pre-mixed joint compound, $0.10 to $0.50 for latex colorant, and $4 to $7 for tinted glaze.

Ceasar Bautista

Guest

Do you concrete pole barn posts?

The best solution – and my recommendation – use a properly treated post, backfilled with pre-mix concrete in a monolithic pour. Place a minimum of six (and better eight) inches of concrete below the column and eight or more inches up the post (this is known as a bottom collar).

Matt Ward

Guest

Do you pour concrete before or after pole barn?

New member. The only way to build a pole shed that will last and look good forever is to pour the floor first. The treat post rot out in about 10-15 years if they are in the ground. pour the walls put the post on the cement floor and it will last forever.

Rob

Guest

How do I calculate how much concrete I need?

Quantity of cement = 1/13 × 1.54 m3 × 1440 kg/m3 = 170 kg, no of bag cement for 1m3 m7. 5 concrete = 170/50 = 3.4. If rate of cement = INR 400 per bag, then cost of 3.4 bags cement = 3.4 ×400 = INR 1360.

thanksd

Guest

How many 80lb bags of concrete do I need for a 10x10 slab?

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that's an extra 8 60-pound bags or 6 80-pound bags. Whatever the size of your project, use the formula above to calculate how much concrete you'll need!

Tomas Aschan

Guest

How much does it cost to pour a 30x40 concrete pad?

Cost of 30x40 Concrete Slab The average cost to pour a 30x40 concrete slab that is 6” thick with metal rebar reinforcements is between $8,196 and $12,384. This cost is based on a general purpose use such as a garage, whereas a foundation for a structure may cost more.

Silfverstrom

Guest

How much sand and cement do I need for 1m2 brickwork?

For bricklaying you need to mix one part of cement to five parts building sand. It does not matter how you measure a part, be it by weight or by the bucketful, so long as you use the same means of measuring for both sand and cement.