Each 80-pound bag of QUIKRETE(r) Concrete Mix will yield approximately 0.6 cubic feet of concrete. For a 10' by 10' slab at 4" thick, you will need 33-1/3 cubic feet of concrete, or 56 80-pound bags. Yields are approximate and will vary with waste, uneven subgrade, etc.

Answered by: harrrrrrry Date created: Jun 26, 2022

## How many bags of concrete do I need for a 6x6 slab?

Asked By: ale13 Date created: Jun 14, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: Misha Zaslavsky Date created: Jun 16, 2022

## How do I calculate how much concrete I need for a slab?

Asked By: Jon Lin Date created: Jun 20, 2022

CONCRETE CALCULATOR FORMULADetermine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•

Answered By: Chase Date created: Jun 23, 2022

## How much concrete do I need for a 12x20 slab?

Asked By: GPhilo Date created: Jun 20, 2022

Concrete Extras With a brief look, a 12x20 area at 6 inches deep, you would need approximately 6.31 tons or 4.44 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Answered By: weston Date created: Jun 20, 2022

## Does Home Depot sell plaster of Paris?

Asked By: Siddharth Rout Date created: Jun 14, 2022

White Dry Mix Plaster of Paris-10312 - The Home Depot.

Answered By: Michael Borgwardt Date created: Jun 16, 2022

## How many bags of cement do I need for a house?

Asked By: g.d.d.c Date created: Jun 09, 2022

About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home.

Answered By: limc Date created: Jun 12, 2022

## How many bags of concrete do I need for a 6x6 post?

Asked By: doğukan Date created: Jun 19, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: Alex Wayne Date created: Jun 20, 2022

## How much concrete do I need for a deck post?

Asked By: erenon Date created: Jun 08, 2022

One 80-lb bag of concrete yields . 60 cubic feet when combined with 4 quarts of water. If you're purchasing 80-lb bags of concrete, you'll need 1.66 bags of concrete. As before, since bags of concrete are only sold in whole quantities, you'll need to purchase two (2) 60-lb.

Answered By: troelskn Date created: Jun 11, 2022

## How much sand and cement do I need for brickwork?

Asked By: cambraca Date created: Jun 09, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: Sriram Sakthivel Date created: Jun 10, 2022

## Can you seal a concrete table?

Asked By: Paul Ogilvie Date created: Jun 09, 2022

Because concrete is a porous material it needs to be sealed to prevent staining and water marks. I found a food safe concrete counter top sealer at The Home Depot (online only).

Answered By: Nosredna Date created: Jun 11, 2022

## How many bags of cement do I need for 1000 square feet?

Asked By: Kaushik Ghosh Date created: Jun 21, 2022

400 bagsCement bags About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home.

Answered By: jpoehnelt Date created: Jun 21, 2022

Professor

### How much cement do I need for a brick wall?

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Professor

### How much sand and cement do I need for 100 blocks?

You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Professor

### How much sand and cement do I need for 1000 blocks?

For laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.

Professor

### How much sand and cement do I need for blocks?

For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

Professor

### How much cement do I need for 1000 square feet?

About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home. Sand is not only required for preparing RCC, mortar and plaster but also used for filling and flooring too. Sand consumed is about 1200 cubic ft.

Professional

### How much cement do I need for 1m3 concrete?

Typically, 1m3 of concrete is made up of 350Kg of cement, 700Kg of sand, 1,200Kg of chippings and 150 Litres of water..

Professional

### How many bags of concrete do I need for a 8x8 slab?

How many concrete bags would I need for a 8 ft x 8 ft x 6" slab? 54 x 80lb Concrete bags. How much does it cost to pour a 8'x8' x6" slab? Ready-mix costs approx \$277.86.

Professional

### How much concrete do I need for a metal fence post?

Each hole for the terminal posts must be 8 inches in diameter and 30 inches deep, requiring 0.85 cubic feet of concrete to fill.

Professional

### How fast does quick concrete set?

Quick-Setting Cement Concrete Mix-124011 - The Home Depot sets in 10–15 minutes, which means it will become too firm to work with after that time. 3000 psi in 24 hours (that is normal concrete strength, so at that point should be good enough), 5000 psi at 7 days and Full strength 6000 psi in 28 days.

Professional

### Can you use concrete blocks to build a fire pit?

Because they're so inexpensive and sturdy (costing about \$1 at The Home Depot), cinder blocks lend themselves well to a variety of projects around the house. Here, a course of blocks arranged in a circle creates a DIY fire pit for around \$20.

User

### How much cement do I need for a 20x20 slab?

With a brief look, a 20x20 area at 6 inches deep, you would need approximately 10.52 tons or 7.41 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

User

### Does Home Depot rent concrete grinders?

Concrete Grinder 10" w/ Disc The Home Depot has the concrete equipment you need to handle materials like drywall mud, plaster, stucco, mortar, concrete and more. Rent them today!

User

### How much concrete do I need for 2 post lift?

12,000 pound two-post lifts (and higher capacity): Six (6) inches of concrete at 3000 PSI is required.

User

### How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

User

### How much sand and cement do I need to build a block wall?

Concrete blocks are much easier to calculate. Each block is 450 x 215 x 100. Ten blocks will construct approximately 1 square meter of wall, with 1 bag of sand/cement mix enough for 10 blocks.

Guest

### How many bags of concrete do I need for a 5x5 pad?

How many concrete bags would I need for a 5 ft x 5 ft x 6" slab? 20.8 x 80lb Concrete bags.

Guest

### How much wind can a concrete house take?

All-Concrete Home Withstands 300 MPH Winds, proved by model.

Guest

### How much concrete do I need to fill a 55 gallon drum?

As to how many bags....a 55 gallon drum filled clear to the top is actually closer to 60 gallons. And 60 gallons is 8 cu ft. So if you buy 60lb bags, those do 1/2 cu ft each so you would need 16 of them. IF you buy 80lb bags (2/3 cu ft) you would need 12 bags.

Guest

### How many bags of concrete do I need for a vinyl fence post?

How Much Concrete per Vinyl Fence Post?Post SizePost Height (above surface)80lb Bags Required4×43-4ft double-triple rail9 inch hole15×53-4ft double-triple rail12 inch hole15×55-6ft semi & privacy122

Guest

### How much concrete do I need for a 4 foot sonotube?

For example, a sono tube with a 10" diameter and a 4' depth requires 0.08 cubic yards of concrete..

Guest

### How much concrete do I need for a flagpole?

The depth of the hole should be 1/3-1/4 the post height above ground (i.e., a 6-foot tall would require a hole depth of at least 2 feet).

Guest

### How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

Guest

### What's the difference between Portland cement and quikrete?

Quikrete is concrete – a mix of Portland cement, sand and gravel (and a setting accelerator). But for your vermiculite concrete, you want to prepare pure procedure with Portland cement (not concrete). ... You can prefer to buy Portland cement by the bag at Home Depot and it is not expensive.

Guest

### Does Home Depot rent concrete tools?

Rent Your Cutting & Concrete Equipment Let The Home Depot Tool Rental Centers handle all your cutting and concrete rental equipment needs. ... With rental locations available in most of our stores nationwide, we make it easy to find what you need, when you need it so you can get your project done right.

Guest

### How much plaster do I need for a room?

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

Guest

### How much is a bag of concrete at Home Depot?

Compare Similar Productscurrent productQuikreteSAKRETEQuikrete80 lb. Concrete Mix80 lb. Gray Concrete Mix50 lb. Fast-Setting Concrete Mix\$410 Buy 42 or more \$3.49\$525 Buy 56 or more \$4.73(3609)(1387)(1489)6 more rows

Guest

### How many bags of concrete do I need for a flagpole?

If there is a layer of water across the top, you've added too much. The rule of thumb is about 5 pounds of water to an 80 pound bag of concrete mix.

Guest

### How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Guest

### How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

Guest

### How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Guest

### How much grout do I need to fill concrete block?

Each 80 lb (36.3 kg) bag of QUIKRETE® grout will fill the cores of approximately 3 standard 8" × 8" × 16" (203 × 203 × 406 mm) block.

Guest

### Does Home Depot do concrete work?

Whether you're looking to set a new walkway, repair an existing structure or take on a DIY project, The Home Depot has all of the concrete, asphalt repair and masonry tools you need to get the job done right.

Guest

### How much cement mix do I need?

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards.

Guest

### How much concrete do I need for a 20x20 pad?

Concrete Slab Prices By SizeSlab SizeSquare FeetAverage Cost Installed15x15225\$1,38820x20400\$2,46824x24576\$3,55420x30600\$3,7026 more rows

Guest

### How much concrete sealer do I need?

Apply the Sealant Depending on how porous your concrete is, a gallon of sealer will cover 250 to 500 square feet.

Guest

### What is the best cement paint?

Find the best paint for your home improvement projects

• Best for Basement: KILZ Interior Exterior Basement Paint at Amazon.
• Best for Outdoors: Rust-Oleum Concrete Floor Paint at Walmart.
• Best for Garage: Kilz Concrete & Garage Floor Paint at Walmart.
• Best for Walls: Seal-Krete Damplock Masonry Paint at Home Depot.

Guest

### How much sand and cement do I need for 1000 bricks?

To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand. 1 Bag of cement to 3 wheelbarrows of building sand.

Guest

### How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly \$6 to \$11 per 100 square feet, considering you'll need \$2 to \$3 for pre-mixed joint compound, \$0.10 to \$0.50 for latex colorant, and \$4 to \$7 for tinted glaze.

Guest

### How much concrete do I need for a 10 sonotube?

For example, a sono tube with a 10" diameter and a 4' depth requires 0.08 cubic yards of concrete.

Guest

### Where can I buy quikrete concrete resurfacer?

Quikrete 40 lb.

Concrete Resurfacer-113141 - The Home Depot..

Guest

### Does Home Depot rent concrete mixers?

Let The Home Depot Tool Rental Centers handle all your cutting and concrete rental equipment needs. ... We offer concrete mixer rentals and saw rentals, including concrete saws, masonry saws, miter saws, tile saws and gas chainsaws from our selection of trusted professional-quality top brands.

Guest

### How do I calculate how much cement I need?

How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•Apr 23, 2018

Guest

### How do I calculate how much concrete I need?

Quantity of cement = 1/13 × 1.54 m3 × 1440 kg/m3 = 170 kg, no of bag cement for 1m3 m7. 5 concrete = 170/50 = 3.4. If rate of cement = INR 400 per bag, then cost of 3.4 bags cement = 3.4 ×400 = INR 1360.

Guest

### How do I figure out how many yards of concrete I need for a slab?

How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards.

Guest

### How do I figure out how many yards of concrete I need?

How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards..

Guest

### How many 80lb bags of concrete do I need for a 10x10 slab?

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that's an extra 8 60-pound bags or 6 80-pound bags. Whatever the size of your project, use the formula above to calculate how much concrete you'll need!

Guest

### How many bags of cement do I need for a 1000 sq ft slab?

400 bagsCement bags So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home.

Guest

### How much does a 4 solid concrete block weigh?

Home Depot web page shows that each block weighs 33 lbs.

Guest

### How much does it cost to pour a concrete slab for a mobile home?

A slab for a mobile home costs about \$9,720.

Guest

### How much is a concrete slab for a mobile home?

A slab for a mobile home costs about \$9,720.