Best answer

High-Strength Concrete Mix: When durability is key, high-strength concrete makes a great choice. This is ideal for foundations, footers and heavy equipment bases.

Answered by: LinPy Date created: Jun 23, 2022

What kind of plaster is used on ceilings?

Asked By: J. Hesters Date created: Jun 25, 2022

Lath & plaster and Plasterboard ceilings explained. The two of plaster surfaces commonly encountered: Lath and plaster - generally used up to the mid-1950's. Plasterboard - widely used from the 1950's onwards.

Answered By: rogeriopvl Date created: Jun 26, 2022

How can I tell what kind of plaster I have?

Asked By: Sheridan Date created: Jun 16, 2022

Locate an out-of-the-way area to conduct a test to determine the type of plaster used. A good area is the attic. Check for an area where the plaster is in disrepair or falling off the walls. This allows you to look at the wall and determine the support backing and type of plaster used.

Answered By: stuartd Date created: Jun 18, 2022

What kind of cement should I use for a stone wall?

Asked By: deaton.dg Date created: Jun 18, 2022

Type N: This medium-strength mortar is the type most commonly used. It is suitable for general use in above-grade exterior masonry, such as freestanding walls and nonloadbearing structures such as planters.

Answered By: domsson Date created: Jun 21, 2022

What is the best concrete mix?

Asked By: Ethan Furman Date created: Jun 20, 2022

In terms of the ratio for concrete, it depends on what strength you are trying to achieve, but as a general guide a standard concrete mix would be 1 part cement to 2 parts sand to 4 parts aggregates.

For foundations, a mix of 1 part cement to 3 parts sand to 6 parts aggregates can be used..

Answered By: Ben Reiniger Date created: Jun 21, 2022

Where is high strength concrete used?

Asked By: Siguza Date created: Jun 20, 2022

High-strength concrete is typically used in the erection of high-rise structures. It has been used in components such as columns (especially on lower floors where the loads will be greatest), shear walls, and foundations. High strengths are also occasionally used in bridge applications as well.

Answered By: Bas Leijdekkers Date created: Jun 20, 2022

What concrete means?

Asked By: WestLangley Date created: Jun 17, 2022

Concrete is that pourable mix of cement, water, sand, and gravel that hardens into a super-strong building material. Sidewalks, foundations, and highways are all made of concrete. ... When used as an adjective, concrete also means solid.

Answered By: O. Jones Date created: Jun 20, 2022

What can I do with old concrete slabs?

Asked By: King Friday Date created: Jun 19, 2022

Uses of Old Concrete Big chunks of old concrete may be placed on walkways to increase porosity of the surface. Concrete roads may be pulverized on site through rubblization and used as a base before applying asphalt. This kind of material has been found to be suitable for aquatic habitat in reefs.

Answered By: Milovan Tomašević Date created: Jun 20, 2022

What kind of concrete do you use for a fire pit?

Asked By: richie Date created: Jun 08, 2022

Quikrete 5000 (20-25 Bags) QUIKRETE® 5000 Concrete Mix is a commercial-grade blend of stone or gravel, sand, and cement and is specially designed for higher early strength. This is the recommended concrete mix to use because of the high early strength and low price.

Answered By: Romain Linsolas Date created: Jun 11, 2022

What kind of cement is used for crafts?

Asked By: Matus Dubrava Date created: Jun 13, 2022

Lime-based Portland cement is commonly used and mixed with gravel (crushed stone) to make the typical mix used for your sidewalks. But as a crafter I often use a finer mix but there are still a few to choose from.

Answered By: E_net4 ran out of flags Date created: Jun 16, 2022

What is concrete used for today?

Asked By: Hiren Patel Date created: Jun 15, 2022

Concrete is used for many applications, including basic foundations, superstructures, wastewater treatment facilities, water treatment facilities, parking structures, floor construction, and exterior surfaces.

Answered By: Felipe Oriani Date created: Jun 18, 2022

Related Question Answers

Joe

Professor

What kind of oil do you use for concrete forms?

SUNOCO CONCRETE FORM RELEASE OIL is a premium quality lubricant formulated as a quick, non-staining releasing agent for metal and wooden forms. The fluid is specially compounded with a combination spreading and releasing agent to prevent cement from adhering to form surfaces.

v-andrew

Professor

What kind of paint do you use on fiber cement siding?

Sherwin-Williams Duration® Exterior Latex Coatings are the best topcoat choices for new fiber-cement siding. Because they have a substantially higher film build than conventional paints, only one coat is necessary over a primed surface – and Duration is guaranteed not to peel or blister.

peterm

Professor

What type of hardwood flooring is best for concrete slab?

engineered wood floorA floating floor is the perfect companion for a concrete subfloor. According to flooring experts, the best kind of wood flooring to use with a concrete subfloor is a floating engineered wood floor. This kind of floor performs well, resists moisture and is easy to install.

madox2

Professor

How do you make homemade concrete mix?

For foundations, a mix of 1 part cement to 3 parts sand to 6 parts aggregates can be used. Measure around half of the cement, sand and aggregates (for a concrete mix only) you're going to mix. Using half now will prevent the mix from drying out before you get chance to use all of it – you can mix the other half later.

Michael Haren

Professional

Can you concrete over soil?

Yes, you need to remove the top soil and be on natural ground or compacted fill. It is common for flatwork like sidewalks and patios. It is also used in structural foundations like mats. I have used concrete for a seal slab to provide a working surface for large transformer foundations.

Cezar

Professional

Why is concrete used for foundations?

Concrete walls are exceptionally stable, providing the home with an increased sustenance and firmness. Unlike other types of foundations, they do not shift with the movement of the soil beneath the house. Due to its durability, poured concrete is the most commonly used building material for a foundation.

BenAlabaster

Professional

Can you add cement to a gravel driveway?

Laying a concrete driveway over an existing gravel one is possible, but it is not generally recommended. ... The kind of gravel that is intended to go under cement is typically a smaller grade than what is used for gravel driveways.

Joe

Professional

Does concrete stick to clay?

Concrete is a strong adaptive material that's often cast for use as sculpture or accent pieces. ... For one-of-a-kind casts, clay can be used to recreate an object in concrete from a model on hand with a few short steps.

Ayushya

User

Why are concrete blocks used?

Blocks are constructed using concrete or cement. They may include a hollow core to make them lighter and to improve their insulation properties. ... They are now used for a wide variety of purposes such as the construction of load-bearing walls, retaining walls, partitions and foundations.

acjay

User

What kind of sand do you use to lay concrete blocks?

Soft sand is also known as building sand and contains fine grains of sand and is used for bricklaying, pointing and where thin layers of mortar are required. Sharp sand is more coarse than building/soft sand and is perfect for mixing with other sands to prevent cracking during the drying process.

vestland

User

What is slag cement used for?

What is slag cement used for? Slag cement is most widely used in concrete, either as a separate cementitious component or as part of a blended cement. It works synergistically with portland cement to increase strength, reduce permeability, improve resistance to chemical attack and inhibit rebar corrosion.

Triptych

User

What kind of paint do you use on a concrete driveway?

Driveways Sidewalk Concrete Colored Paint Low VOC Option ColorTec Acrylic™ SureCrete's SureSeal ColorTec Acrylic™ is an exterior concrete paint that can be used for coloring driveway and sidewalk that require a high traffic coating. 30 standard colors include gray, silver, white, red, brown and tan.

Martin Costello

User

What kind of sand do you use for a concrete slab?

Sharp Sand (which has larger grains) is used for concreting or laying paving slabs and Soft Sand is used for bricklaying, etc.

It is also possible to buy mixed aggregate containing both coarse and fine aggregates..

Cameron Bieganek

Guest

Are concrete foundations waterproof?

Foundations are the most important parts of a building, literally what the house is built on and what keeps the building standing.

...

Foundations are made of reinforced concrete, which is not waterproof and also it comes with cracks.

Water is mostly kept out but vapour and moisture can still penetrate..

cimmanon

Guest

What type of concrete is used in foundations?

Usually, plain concrete is used for constructing pavements, footpaths and buildings in areas that do not require high tensile strength. High-strength Concrete – High-strength concrete is prepared by decreasing the water-cement ratio to less than 0.35. Such concrete has strength exceeding 40 MPa.

Dan Tao

Guest

What is a C40 concrete mix?

C40 Concrete is a strong commercial grade concrete mix most commonly used in the construction of structural and support beams, footings and foundations and agricultural uses. ... The mix ratio in C40 concrete is 1 : 1.5 : 3, which is same as mix ratio of M20 grade of concrete.

kritzikratzi

Guest

What is cement element compound or mixture?

It is a mixture of compounds actually. Since cement in itself doesn't have a reactant or inherently ionisable compound, therefore it is a mixture. After drying, cement forms intramolecular crystalline bonds(kind of intermingled crystals, but very strong) which are physical, not chemical.

Promise Preston

Guest

Where is Portland slag cement used?

PSC has been voted as the most suitable cement for concrete pavements, mass concrete applications, high performance or high strength concrete, structures and foundations, pre-cast concrete such as pipe & block, concrete exposed to sea water and marine application.

eonil

Guest

Is concrete edible?

Yeah asphalt is kind of gross but cement is made principally of limestone and clay which are both edible. ... Concrete is just cement with gravel and sand in it. Go for it dude. Eat it.

whites11

Guest

What kind of cement do you use for a shower pan?

Floor Mud QUIKRETEQUIKRETE® Floor Mud (No. 1548-81) is a Portland cement based underlayment mortar designed for leveling travertine, slate and marble floor tile, and for shower pan applications.

David Cullen

Guest

Is fast setting concrete weaker?

Fast-setting concrete isn't just simple and fast, it's also durable and strong, reaching 4000 psi — or pounds of force per square inch —after a month. That's stronger than the concrete used for foundations on most homes.

Mickael Maison

Guest

What kind of paint do you use on cement board?

Acrylic paintFor cement boards that have already been primed, 100% acrylic exterior paint is recommended. Acrylic paint is the best choice for cement board. It's especially important if you are working with new cement board to avoid oil-based primer.

Thomas

Guest

What type of cement is used for pointing?

Paving Mortar Mix For pointing use 4 parts soft sand and 1 part cement. For high traffic areas, a stronger mix of 3 parts soft sand and 1 part cement can be used.

uberllama

Guest

What is a good concrete mix?

In terms of the ratio for concrete, it depends on what strength you are trying to achieve, but as a general guide a standard concrete mix would be 1 part cement to 2 parts sand to 4 parts aggregates. For foundations, a mix of 1 part cement to 3 parts sand to 6 parts aggregates can be used.25 Oct 2018

Alex Reinking

Guest

What is Portland cement used for?

Portland cement is used to make almost all concrete. It is also the principal cement used in most masonry mortars and renders. The most commonly used type of Portland cement is Ordinary Portland Cement (OPC), but there are other varieties available, such as white Portland cement.

rob mayoff

Guest

What can Portland cement be used for?

Portland cement is used to make almost all concrete. It is also the principal cement used in most masonry mortars and renders. The most commonly used type of Portland cement is Ordinary Portland Cement (OPC), but there are other varieties available, such as white Portland cement.

Chase

Guest

Why reinforced concrete is used?

What is reinforced concrete used for? Reinforced concrete is used for construction on a large scale, such as bridges, dams, piers, tall buildings and stadiums. It is most commonly used in domestic construction for the footings and foundations of smaller everyday dwellings.

GoZoner

Guest

Will hydraulic cement bond to concrete?

Hydraulic Cement is Weak – Cement of any kind, by itself, has little structural strength – that's why it's most often combined with sand and aggregate to form concrete, a very strong material. Cement alone is generally used as mortar to “glue” together masonry materials like brick, stone or concrete block.

Siddharth Rout

Guest

Can I pour cement over gravel?

Laying a concrete driveway over an existing gravel one is possible, but it is not generally recommended. ... The kind of gravel that is intended to go under cement is typically a smaller grade than what is used for gravel driveways.

inspectorG4dget

Guest

What kind of cement do you use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.

OneCricketeer

Guest

What type of concrete is used for foundations?

GRADE: C25 CONCRETE A multi-purpose concrete that is used on a wide range of commercial and domestic construction sites. C25 is often used when pouring foundations (footings). It is also the ideal concrete for domestic slab foundations for house and bungalow floors.

Andrei Solero

Guest

Can you lay concrete over pebbles?

Laying a concrete driveway over an existing gravel one is possible, but it is not generally recommended. The kind of gravel that is intended to go under cement is typically a smaller grade than what is used for gravel driveways.

skypjack

Guest

What kind of cement do you use for shower tile?

Thinset mortar is your default tile mortar for most indoor and outdoor applications. Thinset is a mortar that is made of Portland cement, silica sand, and moisture-retaining agents. Thinset tile mortar has a smooth, slippery consistency, similar to mud.

Lord

Guest

What kind of cement is used for a shower pan?

The ideal mortar for a shower pan is a mix of standard cement mix with sand and Portland cement. This type of mortar creates a great water-resistant barrier that can support the weight of the shower unit.

Kirk Woll

Guest

What kind of cement is used for molds?

Place the QUIKRETE® Fiber-Reinforced Concrete, QUIKRETE® Sand Mix, or QUIKWALL® Surface Bonding Cement, or QUIKRETE® Quick-Setting Concrete in the mold. Be careful not to disturb the sand or move the rigid foam or wood strips. Smooth the surface of the concrete so that it is level with the upper edges of the sides.

Anderson Green

Guest

What kind of coal is used in cement plants?

Bituminous coalsBituminous coals make the best coke and are in any case the most common, and these are most often used in the cement industry.

Coal originally began to form during the Carboniferous period, which took place between 360 and 290 million years ago..

Bob Jarvis - Reinstate Monica

Guest

What kind of paint do you use on old plaster walls?

Latex primer can be used but alkyd primers are recommended for best results on plaster.

Use trisodium phosphate (TSP) to clean heavily soiled walls.

Use a paint pole to extend the reach of the roller.

Doug Stevenson

Guest

What kind of plywood do you use for concrete forms?

Virtually any "Exterior" rated APA panel can be used for concrete formwork because all such panels are manufactured with moisture resistant adhesive. For concrete forming, the plywood industry produces a special product called Plyform®, which is recommended for most general forming uses.

RRiVEN

Guest

What kind of primer should I use on plaster walls?

Latex primer can be used but alkyd primers are recommended for best results on plaster. Use trisodium phosphate (TSP) to clean heavily soiled walls. Use a paint pole to extend the reach of the roller.

Sam Chen

Guest

What kind of pump is commonly used in concrete pumping?

piston pumpsUsually, piston pumps are used, because they can produce hundreds of atmospheres of pressure. Such piston-style pumps can push cylinders of heterogenous concrete mixes (aggregate + cement). The pump below uses a transfer tube valve, and the one on the right uses seat valves.

brasskazoo

Guest

What kind of tape do you use on cement board?

FibaTape Drywall Tape for Cement Board FibaTape® Cement Board Tape is a patented alkali-resistant fiberglass mesh drywall tape, and the only tape that should be used for cement applications with dry or thin-set mortar.

HLGEM

Guest

Where is PPC cement used?

Portland Pozzolana Cement (PPC) It can be confidently employed in construction of hydraulic structures, marine works, mass concreting such as dams, dykes, retaining walls foundations and sewage pipes. It is also suitable for use in common applications such as masonry mortars and plastering.