Best answer

So, a concrete slab for a half basketball court may cost up to $18,800. After the concrete slab or other base coat is poured, you need to cover it with the actual material for the basketball court.

Answered by: monfresh Date created: Jun 23, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: Alex Martelli Date created: Jun 10, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: Jonathan Tuzman Date created: Jun 11, 2022

How do I calculate how much concrete I need for a slab?

Asked By: inspectorG4dget Date created: Jun 15, 2022

CONCRETE CALCULATOR FORMULADetermine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•

Answered By: ThomasIsCoding Date created: Jun 15, 2022

How much concrete do I need for a 12x20 slab?

Asked By: Vitaly Menchikovsky Date created: Jun 07, 2022

Concrete Extras With a brief look, a 12x20 area at 6 inches deep, you would need approximately 6.31 tons or 4.44 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Answered By: piRSquared Date created: Jun 08, 2022

How many bags of concrete do I need for a 6x6 post?

Asked By: Carl Smotricz Date created: Jun 21, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: philnash Date created: Jun 23, 2022

How much concrete do I need for a deck post?

Asked By: ReynierPM Date created: Jun 09, 2022

One 80-lb bag of concrete yields . 60 cubic feet when combined with 4 quarts of water. If you're purchasing 80-lb bags of concrete, you'll need 1.66 bags of concrete. As before, since bags of concrete are only sold in whole quantities, you'll need to purchase two (2) 60-lb.

Answered By: Michael Foukarakis Date created: Jun 10, 2022

How much sand and cement do I need for brickwork?

Asked By: Hafez Divandari Date created: Jun 15, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: iansedano Date created: Jun 16, 2022

How much cement do I need for a brick wall?

Asked By: Pirate Date created: Jun 08, 2022

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Answered By: Maxim Orlov Date created: Jun 09, 2022

How much sand and cement do I need for 100 blocks?

Asked By: pathikrit Date created: Jun 18, 2022

You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Answered By: Guru Stron Date created: Jun 21, 2022

How much sand and cement do I need for 1000 blocks?

Asked By: Lee Richardson Date created: Jun 15, 2022

For laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.

Answered By: icktoofay Date created: Jun 18, 2022

How much sand and cement do I need for blocks?

Asked By: mario Date created: Jun 09, 2022

For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

Answered By: Álvaro González Date created: Jun 09, 2022

Related Question Answers

Joakim Danielson

Professor

How many bags of cement do I need to lay 100 blocks?

As a general rule, you can order around 600 to 800 pounds of sand for every 100 blocks you are setting, provided that you are using the standard size cinder block. You will use two and a half to three bags of cement mixed in with that sand.

Serge

Professor

How many hollow blocks of cement do I need?

Averages. As a general rule, you can order around 600 to 800 pounds of sand for every 100 blocks you are setting, provided that you are using the standard size cinder block. You will use two and a half to three bags of cement mixed in with that sand.

Dan Mullin

Professor

How much concrete do I need for a 10x10 slab?

For a 10 x 10 slab, we'd suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

AJP

Professor

How much concrete do I need for a 4x4 fence post?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

andy250

Professional

How much sand and cement do I need for a block wall?

For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

pRaNaY

Professional

How much cement do I need for a 20x20 slab?

With a brief look, a 20x20 area at 6 inches deep, you would need approximately 10.52 tons or 7.41 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Pascal Thivent

User

How do you clean a concrete tennis court?

High pressure cleaning is the fastest and safest way to clean the tennis court. To avoid algae and other fungal contaminants growing on the court we recommend you purchase a commercial 'leaf blower' to remove any debris from the tennis court. You should attempt to remove debris at least once or twice a week.

Brandon

User

How many bags of concrete do I need for a basketball court?

elevenThe recommended hole size is 16 inches in diameter and 48 inches deep. You will need eleven 80-lb bags of concrete for the installation. How much does it cost to install an in ground basketball hoop? On average, installation will cost around $450.00 for an in-ground system if you have it professionally installed.

Reto Koradi

User

How thick is a concrete basketball court?

You need: A slab at least 4 inches thick, with material at least 3,000-3,500 pounds per square inch (PSI) Rebar 1/2 inch thick to support the concrete..

jared_mamrot

User

How thick should a concrete slab be for a basketball court?

3500 PSIBase Material Many basketball courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance.

Kevin M. Mansour

Guest

Is concrete or asphalt better for a basketball court?

Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance. Asphalt is another option for base material, depending on your preference.

temporary_user_name

Guest

How many bags of concrete do I need for a post footing?

45 cubic feet of concrete when mixed with 2.5 quarts of water.

In order to have enough concrete for 1 cubic yard (27 cubic feet), you'll require 2.2 bags of 60-lb concrete.

Since bags are only sold in whole (not half, or quarter) quantities, you'll need to purchase three (3) 60-lb.

bags for one cubic yard..

Houman

Guest

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

moshfiqrony

Guest

How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Ben.S

Guest

How much concrete do I need for a steel fence post?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place.

The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.

Depth of the hole is one-third to half the above ground height of the fence post..

pawello2222

Guest

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

Eric O Lebigot

Guest

How much concrete do I need for deck footings?

In order to have enough concrete for one cubic foot, you'll require 2.2 bags of 60-lb concrete.

Since bags are only sold in whole (not half, or quarter) quantities, you'll need to purchase three (3) 60-lb.

bags for one cubic foot..

lfaraone

Guest

How much concrete do I need to set a post?

Remember, the depth of the post hole should be one-half of the above-ground post height.

(Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

The calculator will indicate the number of 50 lb.

bags of QUIKRETE® Fast-Setting Concrete you need..

RRiVEN

Guest

How thin can I make a concrete countertop?

Glass Fiber Reinforced Concrete can go as thin as 3/4″ for the same kitchen countertop slabs that would need to be 1.5″ thick for precast.

This instantly cuts the weight in half..

Akxe

Guest

How much plaster do I need for a room?

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

Dark Falcon

Guest

How many bags of concrete do I need for a fence post hole?

1 - 4 bagsMost fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

Mike Hogan

Guest

How much cement do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

tux21b

Guest

How much concrete do I need for basketball hoop?

A hole that's 2 feet long, 2 feet wide and 2 feet deep is 8 cubic feet. Multiply the cubic feet by . 45, if you're using 60-pound bags of concrete, or by . 6, if you're using 80-pound bags.

derpirscher

Guest

Is playing basketball on concrete bad?

Concrete or asphalt surfaces — common in city courts and home driveways — are potentially dangerous for children. While concrete offers a satisfying basketball bounce, the surface has very little give and can be harsh on players' legs and ankles. Concrete surfaces also pose an increased risk for concussion.

Arjan

Guest

How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Ben Bolker

Guest

How much concrete do I need for Paver molds?

For a customized look, purchase powdered cement coloring to add to the concrete mixture. Here's how we made our lovely walkway with the mold. Determine the amount of concrete material needed for the project. Quikrete recommends one 80-pound bag of concrete for every 2 feet of walkway.

M.Hassan Nasir

Guest

How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

Alex Riley

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Mark Ransom

Guest

How much concrete do I need for fence posts?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

ssube

Guest

How much plaster do I mix?

Generally, you'll want to use approximately a 1:1 ratio of plaster to water—in other words, half and half.

Badr Bellaj

Guest

How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly $6 to $11 per 100 square feet, considering you'll need $2 to $3 for pre-mixed joint compound, $0.10 to $0.50 for latex colorant, and $4 to $7 for tinted glaze.

Adil Hussain

Guest

How far should concrete fence posts be in the ground?

eight and a half feetBeing heavy, you will need two people to fix concrete posts into the ground and there is only one way to do it – by digging deep holes. A six-foot fence panel will need at least eight and a half feet posts (basic maths = at least two and a half feet into the ground!).