Best answer

3500 PSIMany basketball courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance.

Answered by: Jim Jones Date created: Jun 26, 2022

How thick should plaster skim be on plasterboard?

Asked By: MadProgrammer Date created: Jun 11, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set. Cover the entire surface in one go — don't stop halfway.

Answered By: Bruce Date created: Jun 12, 2022

How thick should plaster be on plasterboard?

Asked By: Aakash Date created: Jun 22, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: Steve Summit Date created: Jun 24, 2022

How thick should a concrete slab be for a mobile home?

Asked By: ColeX - MSFT Date created: Jun 17, 2022

4 to 6 inches

Answered By: Pete Becker Date created: Jun 19, 2022

How thick does a concrete slab need to be for a garage?

Asked By: Stuart Marks Date created: Jun 22, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: Little Ball Date created: Jun 22, 2022

How thick should tile cement be?

Asked By: Jordon Phillips Date created: Jun 22, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: Brandon Bertelsen Date created: Jun 23, 2022

How thick should a concrete slab be for a shed?

Asked By: the Tin Man Date created: Jun 13, 2022

Recommended Thickness of Concrete Slabs Shed Slabs: 3 1/2 inches thick. Shed floors that are being used for studio sheds or workshops will use a 3 1/2" thickness. Driveways: 4 inches, some areas require 5 inches. Many garage sheds need a driveway approaching the large shed door.

Answered By: Sandeep Raju Prabhakar Date created: Jun 16, 2022

How thick should concrete footings be?

Asked By: JoshBerke Date created: Jun 14, 2022

Footing thickness - 8 to 12 inches. Footing depth - varies based on frost line and soil strength (some footings can be shallow, while other must be deep)

Answered By: Cerise Limón Date created: Jun 14, 2022

How thick should a concrete driveway be?

Asked By: TLP Date created: Jun 24, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: pupeno Date created: Jun 25, 2022

How thick does concrete need to be for heavy equipment?

Asked By: flycee Date created: Jun 18, 2022

Six inchesSix inches of thickness should be more than adequate for areas where heavy equipment will be driven and parked. For lesser loads, four inches.

Answered By: vehomzzz Date created: Jun 19, 2022

How thick is the plaster on a gunite pool?

Asked By: John Date created: Jun 19, 2022

3/8-inchSwimming pool plaster topcoats should be of no less than 3/8-inch thickness.

Answered By: GuiFalourd Date created: Jun 22, 2022

Related Question Answers

Jared

Professor

Does concrete ruin basketball shoes?

Abrasive materials like concrete or broken down basketball courts can result in a grinding on the bottom of the shoe that can force it to lose traction and can even alter the overall shape of the shoe itself.

rink.attendant.6

Professor

How thick should a cement driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Santiago Corredoira

Professor

How do you prepare concrete for epoxy coating?

Preparing Concrete Floors for Epoxy CoatingRemove clutter and furniture from the floor.With a broom, sweep away any dirt or dust from the floor.Sticky material or thick mud should be removed with a metal putty knife.A course brush and a chemical degreasing agent should be used to scrub away greasy areas.More items...•Oct 8, 2020.

Todd A. Jacobs

Professor

How do you clean a concrete tennis court?

High pressure cleaning is the fastest and safest way to clean the tennis court. To avoid algae and other fungal contaminants growing on the court we recommend you purchase a commercial 'leaf blower' to remove any debris from the tennis court. You should attempt to remove debris at least once or twice a week.

Jeff Meatball Yang

Professor

How many bags of concrete do I need for a basketball court?

elevenThe recommended hole size is 16 inches in diameter and 48 inches deep. You will need eleven 80-lb bags of concrete for the installation. How much does it cost to install an in ground basketball hoop? On average, installation will cost around $450.00 for an in-ground system if you have it professionally installed.

davidmytton

Professional

How thick is a concrete basketball court?

You need: A slab at least 4 inches thick, with material at least 3,000-3,500 pounds per square inch (PSI) Rebar 1/2 inch thick to support the concrete..

mason

Professional

How thick is the concrete on a tennis court?

100mmConcrete tennis courts technology has changed dramatically whereby the numerous expansion joints are not necessary. Depending on site conditions the normal slab is 100mm thick reinforced with F72 mesh. The strength of the concrete is 25mpa.

OverLordGoldDragon

Professional

How thick should a concrete slab be for a basketball court?

3500 PSIBase Material Many basketball courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance.

Adam Hughes

Professional

Is concrete or asphalt better for a basketball court?

Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance. Asphalt is another option for base material, depending on your preference.

Javaru

User

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

Madara's Ghost

User

How thick should a concrete pool be?

between three and four inchesGenerally, the pool walls need to be between three and four inches thick. Smooth the pool walls with your trowel, as you did for the base. Now the concrete has to cure properly before you can fill it with water. The concrete curing process allows the concrete to reach maximum strength and takes approximately 28 days.

StefanN

User

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

Mir-Ismaili

Guest

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

Ben

Guest

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

Mahade Walid

Guest

How thick should concrete be for 2 post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience. Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.

pmg

Guest

How thick should concrete be to hoist?

100mmYour hoist has specific requirements to secure safely to a concrete base. Make sure your concrete is thick enough to support your hoist, minimum thickness is 100mm. Also, ensure your concrete is in good condition with no major cracks.

HockeyJ

Guest

How thick should concrete resurfacer be?

1/2 inchUnlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

Abe Miessler

Guest

How thick does a concrete garage floor need to be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it.

Building codes offer requirements for the concrete mix, which vary by region.

The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix..

Aniruddha Das

Guest

How thick does a concrete sidewalk need to be?

100mmSidewalks should be at least 4" (100mm) in thickness.

Simple slabs for small foundations, bases, etc., normally 4" to 6" (100mm to150mm) thick, depending on the load they must bear.

Slope the walk away from buildings to provide proper drainage..

machineghost

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

Javaru

Guest

How thick should a concrete drive be?

For a standard driveway your sub-base should be at least 100mm deep (the same depth as the concrete), rising to 150mm if you plan to park larger vehicles on it. The hardcore sub-base needs to be in place and compacted before any ready-mix concrete arrives.

thebluephantom

Guest

How thick should a concrete pool deck be?

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

Mickael Maison

Guest

Is playing basketball on concrete bad?

Concrete or asphalt surfaces — common in city courts and home driveways — are potentially dangerous for children. While concrete offers a satisfying basketball bounce, the surface has very little give and can be harsh on players' legs and ankles. Concrete surfaces also pose an increased risk for concussion.

developer033

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

prasad_

Guest

How thick does concrete need to be to not crack?

4 inchesApplied-load cracking. In residential concrete, 4 inches is the minimum thickness for walkways and patios. Garage slabs and driveways should be 5 to 6 inches thick if any heavy truck traffic is anticipated, otherwise 4 inches is adequate.

Julia Silge

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

templatetypedef

Guest

How thick should a reinforced concrete driveway be?

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

Amila Senadheera

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

Brian Ustas

Guest

How hot can Concrete get before cracking?

How thick should concrete be to withstand four hours of temperatures of 2000 degree F without degrading or failing? The concrete barrier likely will be exposed to more than 2000 degrees F.

Alan Thompson

Guest

How hot can Concrete get before it cracks?

How thick should concrete be to withstand four hours of temperatures of 2000 degree F without degrading or failing? The concrete barrier likely will be exposed to more than 2000 degrees F.

Pilacey

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Giang Le

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

David East

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.

Konrad 'Zegis'

Guest

How thick should pool plaster be?

Swimming pool plaster topcoats should be of no less than 3/8-inch thickness. An online look at several pool builders shows they apply plaster to in-ground concrete pool at thicknesses from 3/8 inch up to 5/8 inch.

Sriram Sakthivel

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

Andomar

Guest

How big can a concrete slab be without expansion joints?

Usually, expansion joints should be no farther apart than 2 to 3 times (in feet) the total width of the concrete (in inches). So for a 4 inch thick concrete slab, expansion joints should be no more than 8 to 12 feet apart.

Joachim Isaksson

Guest

How thick is a concrete driveway?

75-100mmConcrete paths should be 75-100mm thick, whereas drives, garage bases or hardstandings should be at least 100mm thick. For heavier use, such as large vans, use a 150-200mm thick concrete slab.

oligofren

Guest

How thick should a concrete shower pan be?

Thickness for Concrete Shower Pan – Base Layer The shower pan base mortar layer thickness should be approximately ½ to 1 inch thick. Since the shower floor already has a pre-slope, just apply a base mortar layer that has an even thickness throughout the shower floor area.

klutt

Guest

How thick should a concrete sunroom be?

Four inches is the minimum thickness for a concrete patio.

You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub..

icecrime

Guest

How thick should a load bearing concrete wall be?

Therefore I recommend that all the walls should be at least 9 inch thick. 4.5-inch thick walls are not structurally safe if they are beyond 7 feet in height or carry some imposed load.

Simon

Guest

How thick should a stamped concrete patio be?

four inchesHow thick is stamped concrete? Our standard slab is a minimum of four inches. Some situations will require us to pour six inches of concrete, and this would be discussed before the project takes place.