Best answer

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

Answered by: Mark Chackerian Date created: Jun 24, 2022

How thick should plaster be on plasterboard?

Asked By: Graham Ritchie Date created: Jun 16, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: Jon Erickson Date created: Jun 16, 2022

How thick should a concrete slab be for a mobile home?

Asked By: Steve Jessop Date created: Jun 15, 2022

4 to 6 inches

Answered By: Ben Wainwright Date created: Jun 18, 2022

How thick does a concrete slab need to be for a garage?

Asked By: glglgl Date created: Jun 16, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: Llama Date created: Jun 17, 2022

How thick should tile cement be?

Asked By: Mecki Date created: Jun 17, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: Mike Date created: Jun 20, 2022

How far apart should concrete piers be for a deck?

Asked By: Andreas Dolk Date created: Jun 17, 2022

8 feetStarting with your perimeter, mark the location of each deck post to locate the fitting position. In general, posts should be spaced no more than 8 feet apart. Some builders position them every 4 feet for a completely rigid frame. The maximum distance between footings is determined by the size of your joist material.

Answered By: Timothy Randall Date created: Jun 17, 2022

How long should concrete deck footings cure?

Asked By: Dale K Date created: Jun 15, 2022

five to seven daysThe Portland Cement Association advises that conventional concrete cures for five to seven days for best results. Some manufacturers make rapid-curing concrete for deck footings that cure in 24 hours.

Answered By: David Arenburg Date created: Jun 15, 2022

How thick should a concrete driveway be?

Asked By: gobrewers14 Date created: Jun 17, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: Richard Hodges Date created: Jun 17, 2022

How long can a plaster pool be exposed without water?

Asked By: Ira Baxter Date created: Jun 22, 2022

eight to ten daysIf the pool ever needs to be drained to replace the water or to maintain the plaster, it should never be left empty for more than eight to ten days at the most. More than this may cause the plaster to dry out and crack.

Answered By: cHao Date created: Jun 24, 2022

How long can a plaster pool stay empty?

Asked By: David Bradshaw Date created: Jun 12, 2022

eight to ten daysIf the pool ever needs to be drained to replace the water or to maintain the plaster, it should never be left empty for more than eight to ten days at the most. More than this may cause the plaster to dry out and crack.

Answered By: helderdarocha Date created: Jun 15, 2022

How long do concrete inground pools last?

Asked By: CL. Date created: Jun 10, 2022

50 yearsHow Long Will a Concrete Pool Last? A concrete pool should last decades (we're talking 50 years or more) if it is properly maintained. While the shell of the pool can become damaged if the building was not done correctly, a well-constructed concrete swimming pool should last a lifetime.

Answered By: Hamish Date created: Jun 10, 2022

Related Question Answers

fearless_fool

Professor

Should you drain a concrete pool for winter?

Close the pool for winter – but don't drain it. In winter, the water in your pool is still your friend. Especially when properly winterized, it helps to protect the pool liner, keep it clean and prevent unnecessary damage from debris, harsh weather and other factors.

Paresh Mangukiya

Professor

How thick should a cement driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Ohgodwhy

Professor

Can you resurface concrete pool deck?

Concrete pool deck resurfacing can spice up your old pool deck without the hassle of tearing out the old concrete and pouring new. Pool deck resurfacing is a process that either repairs damaged concrete surfaces or updates their look.

Sinatr

Professor

How do you paint and seal a concrete pool deck?

Painting the DeckClean your pool deck thoroughly. ... Fill a pump sprayer with a two-part epoxy concrete sealer, mixing according to the manufacturer's instructions. ... Spray the epoxy sealer evenly over the concrete pool deck, being sure not to step in it. ... Fill a paint tray with concrete pool deck paint.More items...

instanceof me

Professional

How much does a concrete pool deck cost per square foot?

Install a Concrete Pool Deck: national average cost The national average materials cost to install a concrete pool deck is $1.79 per square foot, with a range between $1.67 to $1.91. The total price for labor and materials per square foot is $8.17, coming in between $7.40 to $8.95.

slideshowp2

Professional

How much does it cost to resurface concrete pool deck?

Pool Deck Resurfacing A basic resurfacing job of 750-square-foot pool deck ranges in price from $2,250 to $3,750.

A decorative overlay would be about $5,250 to $9,000 while stamped concrete may range from $6,000 to $15,000..

Naslausky

Professional

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

davidism

Professional

Should you seal concrete around a pool?

We recommend sealing a concrete pool deck every 3-5 years. The sealant will wear away over time due to weather exposure, foot traffic, and cleaning efforts. Once this happens, the sealer can no longer protect your concrete from stains, fading and discoloration.

polm23

User

How thick should a concrete pool be?

between three and four inchesGenerally, the pool walls need to be between three and four inches thick. Smooth the pool walls with your trowel, as you did for the base. Now the concrete has to cure properly before you can fill it with water. The concrete curing process allows the concrete to reach maximum strength and takes approximately 28 days.

KamilCuk

User

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

Sergei Panfilov

User

Can you paint concrete around pool?

First off, nearly all of In The Swim's pool deck paint and coatings can be used on concrete and wood, but if you have a concrete pool deck, it's good to start off by locating any cracks or fissures. Hairline cracks don't pose much of a problem, and our pool deck coatings will fill them in fine.

tiboo

User

How do you cool concrete around a pool?

One of the coolest options for pool deck surfaces are textured acrylic coatings.

A coating that's made of concrete and acrylic will absorb less heat than other materials.

Texture also makes the surface feel cooler to the touch because when a person walks on it, their bare feet are exposed to less surface area..

Evan Teran

Guest

How much concrete goes around a pool?

If you're looking for a good starting point when designing your deck, we recommend a minimum of four feet on each side and eight feet on each end (for a rectangle pool). This will give you ample room for navigating the perimeter of the pool, and a little space for some seating.

i_am_jorf

Guest

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

j08691

Guest

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

Andrew Hare

Guest

How thick should my concrete driveway be?

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Dan Mullin

Guest

Should I cement my deck posts?

A deck post should always be placed on top of footing, not inside concrete because it can break. The photo on the left shows a post set in a bracket that has been mounted to the top of a footer. ... When concrete is poured around a deck post in this way, the post will rot due to moisture buildup by the soil.

Sachila Ranawaka

Guest

Should I Concrete my deck posts?

First off, mark where deck posts will stand in the yard. There are several ways to set deck posts; we recommend attaching the posts to concrete footers above the ground. This helps to prevent wooden posts from rotting.

jterrace

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

mchawre

Guest

Should I seal my concrete pool deck?

We recommend sealing a concrete pool deck every 3-5 years. The sealant will wear away over time due to weather exposure, foot traffic, and cleaning efforts. Once this happens, the sealer can no longer protect your concrete from stains, fading and discoloration.

NullVoxPopuli

Guest

What is the best paint for concrete pool deck?

We consider the TotalBoat TotalTread Non-Skid Deck Paint as the best overall pool deck paint because of its UV-stable formula and how cost-efficient it is in improving your pool deck's appearance and durability. The best pool deck paint for concrete decks is the INSL-X Sure Step Anti-Slip Coating.

Yevhen Kuzmovych

Guest

How do you paint a concrete pool deck?

Part 1: PaintingStep 1: Thoroughly clean your pool deck. ... Step 2: Mix the epoxy concrete sealer according to the instructions of the manufacturer. ... Step 3: Evenly spray the concrete pool deck with epoxy sealer using the pump sprayer. ... Step 4: Pour the concrete pool deck paint on the paint tray.More items...

Simone Rossaini

Guest

How much does it cost to concrete a deck around a pool?

A good rule of thumb is for a deck's square footage to be at least the same as your pool's square footage. To illustrate with a simple example, say a rectangle pool is 15 feet wide by 30 feet long. With a 450-square-foot pool, the deck should also be at least 450 square feet.

Dave Newton

Guest

Should I seal the concrete around my pool?

Sealing a pool deck is the best way to keep it clean and new. Prevents staining, water absorption and salt damage. ... No matter if you have plain 'ol gray concrete, exposed aggregate, colored stampcrete, pavers or natural stone around the pool, easily keep it looking new – Seal It!

idz

Guest

What can I put on concrete to keep it cool?

Overview. Resurfaces Decks and Other Concrete Surfaces and keeps them cool. A revolutionary new coating from Encore Coatings that enhances the look of your concrete pool deck while reducing heat build-up by as much as 38%. Can be applied over existing pool deck surfaces and helps keep them cool as well.

Marcus Lind

Guest

How much does it cost to redo concrete around a pool?

With the average pool deck in the US being 900 sq. ft. the total cost would range from $5,400 at the simplest end, to $13,500+ at the most detailed. Concrete can be installed quickly, and mimics the look of many other materials, such as natural stone, wood, brick and more.

Silver Light

Guest

Can you resurface concrete around a pool?

Concrete pool deck resurfacing can spice up your old pool deck without the hassle of tearing out the old concrete and pouring new. Pool deck resurfacing is a process that either repairs damaged concrete surfaces or updates their look.

Steve Py

Guest

How much does it cost to replace concrete around a pool?

With the average pool deck in the US being 900 sq.

ft.

the total cost would range from $5,400 at the simplest end, to $13,500+ at the most detailed.

Concrete can be installed quickly, and mimics the look of many other materials, such as natural stone, wood, brick and more..

Sacha Epskamp

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

Aliaksei Kisel

Guest

Should I paint my concrete pool deck?

Concrete pool decks won't need to use a primer coat, but two coats of our pool deck paint is recommended. If the pool deck surface is extremely rough and pitted, you may even want 3 coats, or a thick initial coating.

gold_cy

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

Bart van Heukelom

Guest

How thick should a reinforced concrete driveway be?

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

Marcelo Cantos

Guest

What is the concrete around a pool called?

The hardscape area around your swimming pool is called a surround, deck, or decking, even though it isn't always made of wood or composite, like traditional outdoor decks with which we most often associate the words. Traditionally, most in-ground swimming pool decks are made of concrete.

slago

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

LJHarb

Guest

How do you restore a concrete pool deck?

How to resurface a pool deck (installation)Prepare & Repair. Etch, grind, or shot blast the concrete surface to make it porous. ... Clean & Prime. Pressure wash and let surface thoroughly dry. ... Mix Product. Following instructions, mix the product to prepare it for application. ... Apply overlay. ... Cure & Seal.

TimTeaFan

Guest

Is Salt finish concrete slippery?

Because of the texture of salt finish concrete, it's slip resistant which makes it an ideal material for a pool deck!

lonesomeday

Guest

Should I seal concrete around pool?

A sealer will improve your pool deck's appearance, prevent fading caused by UV rays and protect it from stains and harmful pool chemicals. Whether your pool deck is plain gray concrete, stained concrete or has a stamped texture, sealing after the concrete has cured and every few years after is recommended.

Michael

Guest

Should you seal concrete pool deck?

A sealer will improve your pool deck's appearance, prevent fading caused by UV rays and protect it from stains and harmful pool chemicals.

Whether your pool deck is plain gray concrete, stained concrete or has a stamped texture, sealing after the concrete has cured and every few years after is recommended..

Kees C. Bakker

Guest

How much does it cost to resurface a concrete pool deck?

Resurfacing also adds strength to your surface by covering and bonding any cracks in your deck. With resurfacing costs starting around $3 to $5 per sq. ft., placing an overlay on your pool deck could save you money and time.

flycee

Guest

What is the best concrete sealer for pool deck?

If you are looking for the best protection from salt water, or if you are looking to keep the pool deck unchanged in appearance, the best product to use is the Siloxa-Tek 8500.

Håken Lid

Guest

How smooth should pool plaster be?

Whether you have a color quartz finish (Multi-colored plaster) or standard plaster (white in color), having a smooth pleasant plaster finish is easy and will add years to your existing pool plasters life. Manufacturers recommend pool plaster thickness to be a minimum of 5/8 inch thick when applied.

Delaire

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

CT Zhu

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

A. Rodas

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.