Best answer

Multiply the square footage by the depth in feet to find the volume of the space in cubic feet. Volume is found by measuring length × width × depth. Finally, divide the cubic footage by 27 to find the volume in cubic yards. This is the amount of concrete needed.

Answered by: Ali Irani Date created: Jun 24, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: Merthan Erdem Date created: Jun 25, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: Chad Grant Date created: Jun 28, 2022

How do I calculate how much concrete I need for a slab?

Asked By: MrCode Date created: Jun 19, 2022

CONCRETE CALCULATOR FORMULADetermine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•

Answered By: Sheehan Alam Date created: Jun 19, 2022

How many bags of cement do I need for a 2 bedroom house?

Asked By: alucic Date created: Jun 13, 2022

40 bags

Answered By: Inbar Rose Date created: Jun 16, 2022

How do I calculate how much plaster I need?

Asked By: Nicola Peluchetti Date created: Jun 24, 2022

For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand). For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand). The thickness of plaster is between = 12 mm to 15 mm. Always use Good quality of cement (Different grades of cement) as well as good quality sand.

Answered By: Mohammad AbuShady Date created: Jun 24, 2022

How do I keep my concrete slab from sinking?

Asked By: Chase Date created: Jun 25, 2022

How can I prevent my concrete from sinking?Seal all open cracks and joints with a polyurethane or silicone caulk. ... Make sure downspouts are discharging at least five feet away from any concrete slab – the farther the better.More items...•

Answered By: Ansgar Wiechers Date created: Jun 27, 2022

How many bags of concrete do I need for a 6x6 post?

Asked By: KamilCuk Date created: Jun 13, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: Gary Archer Date created: Jun 15, 2022

How much sand and cement do I need for brickwork?

Asked By: cglacet Date created: Jun 19, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: isuruanu Date created: Jun 20, 2022

How much cement do I need for a brick wall?

Asked By: Mike Date created: Jun 14, 2022

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Answered By: Bala R Date created: Jun 16, 2022

How much sand and cement do I need for 100 blocks?

Asked By: Radek 'Goblin' Pieczonka Date created: Jun 12, 2022

You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Answered By: Mark O'Sullivan Date created: Jun 13, 2022

How much sand and cement do I need for 1000 blocks?

Asked By: JaredPar Date created: Jun 23, 2022

For laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.

Answered By: mtpultz Date created: Jun 23, 2022

Related Question Answers

charchit

Professor

How do you calculate concrete for a fence?

You need to find out how much fencing you need in linear foot or linear meter and multiply that amount with the fence height pricing you want. For example, if you require 150 linear foot worth of 6 feet high concrete fence. Your material estimate will be 150 x $40 = $6000.

khelwood

Professional

How do I make my concrete driveway less slippery?

Slip-resistant Coating and Grit Another option to consider when making your driveway slip-resistant is to apply a concrete sealer and a polymer grit. What you do is place the sealer on to the surface, add some clear grit, and then spread it evenly using a squeegee.

FrVaBe

Professional

How do I whiten my concrete driveway?

Bleach, Soap, and Water Mixture Mix one cup of bleach with one cup of powdered laundry detergent, then add 15 cups of hot water. Pour your mixture over your driveway's dirty areas, such as the parts that contain oil stains. Work your mixture in using a bristle brush and scrub for approximately 20 minutes.

FrVaBe

Professional

Do I need to reseal my concrete driveway?

Sealing the driveway yearly can lead to unsightly hairline cracks and peeling. And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. ... Materials to fill minor cracks in concrete come in liquids that sell for a few dollars per gallon.

Ryan Haining

Professional

Do I need to seal my concrete garage floor?

Because garage floors are protected from outdoor elements, they don't generally need sealed as often as a concrete driveway. However, most garage floors are made from concrete, making them susceptible to cracking and moisture intrusion from oil spills, antifreeze leakage, and other household chemicals.

Andrey Deineko

User

Do I need to seal my new concrete driveway?

Owners of asphalt driveways often seal them too frequently, and owners of concrete driveways don't seal them at all, experts say. ... And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life.

Maxime Lorant

User

How can I make my old concrete driveway look better?

6 Ways to Make Your Driveway Look Amazing#1: Etching. Nothing sets your driveway apart from the rest like etching. ... #2: Staining. Tired of plain old gray? ... #3: Stamping. Similar to staining or etching, concrete stamping can also spruce up your driveway with color and a pattern. ... #4: Weeding. ... #5: Pavers. ... #6: Resin Bound.

Felipe

User

How much concrete do I need for a 24x24 garage?

Average Cost To Pour Concrete To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944.

azalea

Guest

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

sampathsris

Guest

How much concrete should I get around my pool?

Table and chairs for up to eight requires a minimum 12' x 12' concrete slab. Small end tables and chairs do vary on size of the table. For concrete purposes we generally recommend 5' x 5' concrete slab. Tanning lounger/ Chaise loungers need a minimum of 8' of concrete off of the swimming pool.

James McNellis

Guest

How much rapid set concrete do I need?

Calculate the volume of the hole in cubic metres (using V = πr2h) and then subtract the volume of your post. This will give you the volume of concrete required. Simply multiply the volume figure by 108 (108 bags per cubic metre) to give the amount of 20kg bags needed to fill the void.

Thomas Pornin

Guest

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

Paulo Scardine

Guest

How much concrete do I need for post holes?

Calculate Concrete Volume With the volume of the submerged post and the volume of the hole figured out, subtract the post volume from the hole volume, and you will have the volume of concrete needed for each hole.

Simply multiply that amount times the number of posts to get a total quantity..

Jaap

Guest

How much plaster do I need for a room?

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

Hristo Eftimov

Guest

Do I need to reinforce my concrete slab?

Concrete is an incredibly resilient material, which is why it's used so much in building and construction work. However, some types of concrete structure require reinforcements, which are often put in place as the mixture sets.

wsl

Guest

How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Jonah Williams

Guest

How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

Peter B

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

user6123723

Guest

Should I put sealer on my concrete driveway?

And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. Many people believe that concrete driveways don't need maintenance, so they may never apply a sealer. ... The first step in driveway maintenance is the repair of cracks and holes.

Ernest Friedman-Hill

Guest

Should I resurface my concrete driveway?

Enhances your driveway's appearance: one of the best values of concrete driveway resurfacing is it improves your driveway's appearance. The new layer gives your driveway a fresh look after years of fading and cracking. Extends its lifespan: if you care for your driveway correctly, it should last for up to thirty years.

UltraInstinct

Guest

Should you seal concrete after power washing?

Yes, the driveway definately will need to be sealed. I found out the hard way after pressure washing my drive and not sealing it. The sealer closes up holes in the driveway and prevents water from freezing and cracking in the driveway. Highly recommended.

Lex Li

Guest

How many concrete stamps do I need?

How many stamps do I need for my project? Take your dimensions of your project and figure out which direction you will run your stamps. Next measure what your longest run will be. Ideally you want the enough stamps to cover your first row and 2 stamps for the second row.

Mike Seymour

Guest

How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly $6 to $11 per 100 square feet, considering you'll need $2 to $3 for pre-mixed joint compound, $0.10 to $0.50 for latex colorant, and $4 to $7 for tinted glaze.

BobMorane

Guest

When should I replace my concrete driveway?

Typically you'll need to replace an asphalt driveway after 20 years and a concrete drive after 25 years. Repairing a driveway nearing this age is not considered a wise investment. Beyond the condition of your driveway, many old driveways could do with an update just as a home benefits from renovations.

Ken Chan

Guest

Do I need to seal my concrete sidewalk?

Concrete surfaces like driveways, walkways or sidewalks, in a general sense, do not have to be sealed or protected to perform well. As a matter of fact, a concrete driveway will last for years without being sealed, but once it begins to deteriorate it can be too late to stop it.

psihodelia

Guest

What should I ask a concrete contractor?

10 Questions to Ask a Concrete ContractorHow much experience do you have? ... Do you have a portfolio of pictures of your previous work? ... Can you provide references? ... What is your schedule like? ... How long will my project take? ... Will you need to obtain permits for my project? ... Will you be reinforcing the concrete with rebar?More items...

Florian

Guest

When Should I seal my concrete driveway?

How long should I wait before sealing? The recommended curing time for new concrete is 28 days before sealing. It is imperative, whether sealing new or existing surfaces, to ensure that the surface is completely dry before sealing.

davidsheldon

Guest

How can I save money on my concrete driveway?

Do-it-Yourself. Resurrect skills you learned over time to construct the concrete driveway on your own and save a bundle rather than hiring a company to do the job for you. ... Use Local Concrete. ... Go Green. ... Barter or Trade. ... Hire Students.

Alex B

Guest

How do I calculate concrete units?

Multiply the width, length and depth of your area. Concrete is usually ordered in cubic metres. Here's a conversion guide. There are 1.3 cubic yards in one cubic metre (If you have your requirement in cubic yards, all you need to do is divide by 1.3 to get the cubic metres answer).

sampathsris

Guest

How do I calculate how much cement I need?

How to calculate concrete:Determine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•Apr 23, 2018

Mat

Guest

How do I calculate how much concrete I need?

Quantity of cement = 1/13 × 1.54 m3 × 1440 kg/m3 = 170 kg, no of bag cement for 1m3 m7. 5 concrete = 170/50 = 3.4. If rate of cement = INR 400 per bag, then cost of 3.4 bags cement = 3.4 ×400 = INR 1360.