Best answer

InstructionsDig Under the Concrete. Dig out the soil, gravel, or other material from under the concrete, using a shovel and a pickax. ... Strike the Concrete. Lightly sprinkle the concrete with water to minimize dust. ... Pry Off Stubborn Pieces. ... Move the Concrete Chunks With a Hand Truck.Feb 19, 2020

Answered by: qed Date created: Jun 25, 2022

How do I calculate how much concrete I need for a slab?

Asked By: Bathsheba Date created: Jun 20, 2022

CONCRETE CALCULATOR FORMULADetermine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•

Answered By: hammar Date created: Jun 23, 2022

What do you mix cement with?

Asked By: abyx Date created: Jun 08, 2022

Mixing Concrete: Sand, Cement, Gravel, and Water. When mixing by hand, it is essential to thoroughly mix the concrete to get consistency throughout the mixture. If you need to mix a small amount, for instance half a bucket, place the stone and sand and finally the cement into the bucket.7 Jan 2020

Answered By: MatsLindh Date created: Jun 09, 2022

How do you termite proof a concrete slab?

Asked By: Romain Date created: Jun 22, 2022

To make a concrete slab as termite proof as possible, it is best to use a combination of both physical and chemical barriers to augment its strength. While a builder will be able to put physical barriers in place, chemical barriers can only be installed by licensed pest controllers.

Answered By: nnnnnn Date created: Jun 25, 2022

How do you get concrete dust out of your lungs?

Asked By: Pablo Santa Cruz Date created: Jun 14, 2022

Your lungs will try to secrete lots of mucous and cough it out. Drink lot of water. Do some breathing exercises or run to break off phlegm in your lungs and cough it out.

Answered By: Juan Mendes Date created: Jun 15, 2022

Can concrete break ice?

Asked By: Hymns For Disco Date created: Jun 13, 2022

When the ground freezes, so does the water trapped within your concrete slab. As this happens, it expands and puts pressure on the slab from within. ... Once the weather warms up and water in the slab begins to melt, the concrete can flake and crack.

Answered By: Mike McKerns Date created: Jun 13, 2022

How do you fix a sinking concrete slab?

Asked By: quickshiftin Date created: Jun 13, 2022

Mud jacking can lift a settled concrete slab by pumping a grout through the concrete and pushing it up from below. The process is sometimes called “slab jacking” or “pressure grouting”. 1 to 1 5/8th inch diameter holes are drilled through the sunken concrete block/slab at strategic locations to maximize lift.

Answered By: kebs Date created: Jun 14, 2022

How do you make concrete by hand?

Asked By: Simulant Date created: Jun 08, 2022

How Do I Mix Concrete? - 8 Easy Steps!Spread a plastic sheet on the ground.Measure out the materials.Place the stone and sand into a pile on the sheet.Place the cement on top of the pile of sand and stone.Shovel the material in the pile to one side, creating a new pile and repeat three times.More items...•

Answered By: Michael Berkowski Date created: Jun 10, 2022

How do you hand polish a concrete floor?

Asked By: kritzikratzi Date created: Jun 24, 2022

Turn on the handheld grinder and lower slowly to the concrete. Grind it in using a back and forth and up and down motion. Polish the entire surface until the shine is visible.

Answered By: Slava Fomin II Date created: Jun 24, 2022

How do I smooth a dry concrete floor?

Asked By: rodrigo-silveira Date created: Jun 25, 2022

Sand the Surface and Wash the Concrete Finish by fine-tuning with light sandpaper, until the surface is perfectly smooth.

We recommend using a hand planer to smooth and compact the surface.

If the concrete dries a lot then we recommend that you add water to the surface, this will help you give it a good finish..

Answered By: Alain O'Dea Date created: Jun 27, 2022

How do you cut concrete by hand?

Asked By: Alex Wayne Date created: Jun 16, 2022

Cutting Concrete With HandsMark the Cut Area. Use a pencil to draw the area that will be cut away from the concrete. ... Use a Hammer and Chisel. In one hand, take a chisel and place the edge at one end of the mark in the concrete. ... Use an Angle Grinder. After creating the groove, use an angle grinder to begin cutting into the groove along the mark.Jul 29, 2009

Answered By: Paul Sonier Date created: Jun 19, 2022

Related Question Answers

shilovk

Professor

How do you destroy a concrete slab?

Use a sledgehammer for thin slabs.Don't try to swing the sledgehammer or lift it above your head; hold it at shoulder-height and let it fall onto the concrete, instead.Use the pry bar to pull apart the chunks of concrete after you break them apart.More items...

Grijesh Chauhan

Professor

How do you flatten uneven plaster walls?

If the plaster is only slightly uneven in spots, you can get away with using a block hand sander. If the plaster is horribly uneven, you may need to use an electric sander. Use a fine grade of sandpaper either way, and work slowly. You don't want to create more of a problem by gouging out the plaster.

AJT82

Professor

How do you get contact cement off your skin?

Cleaning and removing rubber cement from your skin is easy to do and shouldn't take more than a few minutes.Wash the afflicted area thoroughly using hand soap and warm to hot water.Scrub the area using a hand sponge, rinsing occasionally.Peel away any excess cement that remains in the area.More items...

joe

Professor

How do you get plaster off your skin without it hurting?

How to remove a plaster from skin without painGrasp one edge of the plaster and gently lift the edge.With the other hand, place fingers on the surrounding skin and support removal by holding the skin taut.Gently remove the plaster keeping it close to skin and in the direction of hair growth.

Vincent Cantin

Professor

How do you lift a sunken concrete slab?

Mud Jacking is a common term for lifting sunken or settled concrete. Mud jacking can lift a settled concrete slab by pumping a grout through the concrete and pushing it up from below. The process is sometimes called “slab jacking” or “pressure grouting”.

Adam Batkin

Professional

How do you make a plaster mold of your hands?

steps

  • Stir alginate with water in a 1-to-1 ratio, nearly filling the 2-quart container.
  • Position hand how you would like it to be cast (if you want the sculpture to function as a candleholder, hold a candle in your hand, keeping it straight; then carefully remove candle), and insert hand into alginate mixture.

Caleb

Professional

How do you make concrete fast?

You could stack a bunch of concrete powder, place the water next to it, and then break the concrete blocks, resulting in the powder falling down and turning into concrete.

Amir Rachum

Professional

How do you make hard cement soft?

How to Soften Concrete

  • Remove all loose concrete. If there is any dried or loosened concrete on the surface of the area, tool, or machinery, remove that by hand before applying the softening agent.
  • Spray the concrete with highly pressurized cold water.
  • Spray with softening agent.
  • Remove the softened concrete.

inspectorG4dget

Professional

How do you make plaster for handprints?

Homemade plaster for hand prints or foot prints! 1/2 cup flour 1/2 cup salt Add water til forms a dough Roll out and make hand or foot print Bake at 200 for 3 hours And done :) Find this Pin and more on DIY & Crafts by Jill Breedlove.

Keith Hill

Professional

How do you make plaster molds by hand?

Stir alginate with water in a 1-to-1 ratio, nearly filling the 2-quart container. Position hand how you would like it to be cast (if you want the sculpture to function as a candleholder, hold a candle in your hand, keeping it straight; then carefully remove candle), and insert hand into alginate mixture.

Darkonaut

User

How do you mix plaster Thistle undercoat?

Pour the required amount of water into the mixing bucket (see selector chart for details).

Only add clean water and do not use any additives.

Add plaster to the water and mix by hand or a slow speed, high torque mechanical whisk.

Thistle plasters should be mixed to a smooth creamy consistency.

Elazar

User

Do cement blocks burn?

Concrete, in itself, does not burn. It can be affected by heat and crack, break or otherwise fail in its integraty, but it cannot sustain a flame. ... It can be affected by heat and crack, break or otherwise fail in its integraty, but it cannot sustain a flame.

jstl

User

Can you mix concrete by hand?

If you need to mix concrete by hand, there are two options: ... It has all the ingredients dry mixed together for making concrete, i.e. the cement, sand and stone. All you have to do is put it into a bucket, wheelbarrow or on a piece of plastic on the ground, add water and spend a few minutes mixing it.

Albert

User

How do you fix a sunken concrete driveway?

Mud Jacking is a common term for lifting sunken or settled concrete. Mud jacking can lift a settled concrete slab by pumping a grout through the concrete and pushing it up from below. The process is sometimes called “slab jacking” or “pressure grouting”.

gdoron is supporting Monica

User

How do concrete buildings burn down?

Concrete, in itself, does not burn. It can be affected by heat and crack, break or otherwise fail in its integraty, but it cannot sustain a flame. ... It can be affected by heat and crack, break or otherwise fail in its integraty, but it cannot sustain a flame. What does burn is the contents of the buildings it forms.

Drew Noakes

Guest

How can I strengthen my concrete slab?

There are also some other techniques used for strengthening a reinforced concrete slab such as:Increasing the shear bearing capacity of the slab by adding steel plates strengthened by vertical screw bolts.Strengthening of the slab by post stressed reinforcement.Adding steel beams.More items....

Jeff Meatball Yang

Guest

How do you break concrete slab?

With small slabs of concrete, such as patio squares or air conditioner pads, you can also have one person pry up the slab a few inches, using a demolition bar, while another person strikes the slab with the hammer. Prying up the slab has the same effect as digging underneath it.

Paul Fultz II

Guest

How do you break a concrete slab without a jackhammer?

Here's a few tips:Recruit a buddy to lift a corner with a pry bar. Start slamming at the corners and work your way towards the center. ... Pry and pull out the broken chunks as they break apart.Don't hit the same spot twice. Keep moving and keep lifting with that pry bar.

Mahdi-Malv

Guest

How do you break concrete with a jackhammer?

To aid in breaking up the concrete, use a "spud bar" in conjunction with the jackhammer. Jam the flat end of the spud bar into the cracks formed by the jackhammer, firmly grip the handle with both hands and use leverage to pry chunks of concrete from the pad for removal.

kentcdodds

Guest

Can you break up concrete with a sledgehammer?

When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.

Ines Montani

Guest

How do you break up a thick concrete slab?

Start to break the concrete, starting six inches from the edge and working your way in. For slabs less than four inches thick, use a sledgehammer. For more than four inches thick, use a demolition hammer.

Xenph Yan

Guest

How do you drop an egg on concrete without breaking it?

All you have to do is to take an egg, sada hua mat lena yar. Hold it in your hand at a height of 2 cm and drop it. Voila you just dropped an egg on a concrete floor without breaking it. Bubble wrap the egg 5 to 6 times and then drop the egg, it would'nt break.

gblazex

Guest

How much concrete can you mix by hand?

Re: How much concrete can you mix by hand? It's about 23 cubic feet total for 5'x15'x4". A yard is 27 cubic feet so you are pretty close to what the concrete companies will deliver.

shaedrich

Guest

How many bags of concrete can I mix by hand?

Re: How much concrete can you mix by hand? 1 bag of mix one gallon of water x 43 figure an easy 8 min average to mix ( you will get tired and slow down) this will take up the better part of 6 hours. the first 1/4 of you mixes will be setting up by the time you finish.

Zags

Guest

How do you break up concrete with a sledge hammer?

Strike the Concrete Grasp the sledgehammer handle with your dominant hand close to the head and your other hand toward the end of the handle. Use an arching motion to lift the hammer as high as possible, but not directly over your head, then let it fall as you slide the dominant hand down the handle.

Brian Thompson

Guest

Can you sand concrete by hand?

Yes. You can if you prefer to sand concrete by hand instead of using a power tool. Unfortunately, because concrete is so tough, regular sandpaper gets worn down very quickly against it. You're generally always better off spending a little extra for diamond sandpaper or diamond pads.

Cassio Seffrin

Guest

How do you anchor a shed to an existing concrete slab?

You can set the sill plate by drilling and epoxying anchor bolts, or epoxying the wood directly to the concrete, but the fastest, most economical way to frame a shed on an existing concrete slab is to rent and use a Ramset powder actuated nail gun.

kohske

Guest

How do you fix an uneven concrete slab?

Level a Concrete Floor.

If you plan on leveling a concrete floor, you can do so with relative ease by using a leveling compound.

It spreads across uneven slabs, filling in low spots as it creates a new, level surface..

Dylan Markow

Guest

How many yards of concrete do I need for a 40x60 slab?

The use determines the thickness. So if you take the surface area and multiply it by the thickness you will get the volume. Ie. 40 feet × 60 feet × 1 foot thick would be 2400 cubic feet of concrete divide by 27 to get cubic yards 2400÷27= 88.889.

Mohit Deshpande

Guest

What is the best way to break up a concrete slab?

Tool #1: Sledgehammer + Pry Bar When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.

flycee

Guest

How do you break concrete without noise?

Dexpan is a powder when mixed with water and poured into pre-drilled holes generates an incredible 18,000 PSI expansive force to break the strongest concrete or reinforced concrete safely and cost effectively with no noise, vibration or dust..

Jan Hančič

Guest

Can I mix concrete by hand?

A cement mixer does a great job at mixing concrete, thoroughly blending the materials to give a consistent result. However it's also possible to mix concrete by hand without a mixer with a little care and some effort. ... All you need for mixing concrete are cement, stone, sand and water.

komeil majidi

Guest

Can you break up concrete with a hammer drill?

Hammer drills do not have a chiseling function and can be used to drill into a variety of materials. ... Demolition hammers can break, chip and chisel concrete, but they can't drill because there is no rotation of the bit.

Dan Lowe

Guest

Can you mix concrete in a plastic bucket?

Step 1: Mixing Concrete by Hand. For smaller projects, 30 lbs. or less, mixing the concrete by hand is pretty easy. It can be mixed in a 5 gallon bucket, a wash tub, or on a plastic sheet or a tarp. ... It helps to have a hand trowel or a small shovel to scrape the sides and bottom of the bucket.

Misha Moroshko

Guest

Can you break concrete with your hand?

Over time, their hands really do become tougher than a normal person's hands, because the bones are thicker and stronger. If you hit concrete hard enough, it will break. If you hit the concrete and it doesn't break, the concrete will provide an equal and opposite force and apply it to your hand.

Devilscomrade

Guest

How do you break a concrete slab with a jackhammer?

To aid in breaking up the concrete, use a "spud bar" in conjunction with the jackhammer. Jam the flat end of the spud bar into the cracks formed by the jackhammer, firmly grip the handle with both hands and use leverage to pry chunks of concrete from the pad for removal.

cmbuckley

Guest

How do you break a large concrete block?

Break larger pieces using a sledgehammer or electric jackhammer.Use a pry bar as you go for the quickest and most effective results.Do not use a jackhammer or similar power tool if you are near a water pipe, electrical line, or gas line.More items...

Quesd

Guest

How do you break concrete at home?

InstructionsCover the concrete slab with 4 mil plastic sheeting if you're working near windows.Dig under the concrete if you're able to do so.Start to break the concrete, starting six inches from the edge and working your way in. ... Pry with a long bar or wrecking bar as you go. ... Cut any mesh wire with bolt cutters.More items...•Oct 14, 2019

komeil majidi

Guest

How do you remove old concrete driveway?

If you're working by hand:Starting at a corner, break up a small section of the driveway using your jackhammer.If necessary, use a sledgehammer to break any large chunks of concrete into smaller pieces.Use a shovel and wheelbarrow to move the debris into your concrete dumpster or pickup truck.More items...•Apr 18, 2017

Vadim Gremyachev

Guest

How do you clean concrete roof tiles?

One of the simplest DIY ways to clean your roof is with a bleach and water combination. You can either clean down the tiles by hand if you've really got the energy – or stand about 4 feet away and use water pressure. However – you need to be careful with bleach.

Marcel Jackwerth

Guest

How do you break concrete by hand?

InstructionsDig Under the Concrete. Dig out the soil, gravel, or other material from under the concrete, using a shovel and a pickax. ... Strike the Concrete. Lightly sprinkle the concrete with water to minimize dust. ... Pry Off Stubborn Pieces. ... Move the Concrete Chunks With a Hand Truck.

ksav

Guest

Can you mix cement by hand?

Mix concrete by hand by pouring concrete into a wheel barrow and slowing adding water, mixing with a garden hoe until the right consistency is reached.

rixo

Guest

How do you sand a concrete floor by hand?

Attach 180-grit sandpaper, which is a fine grit, to a pole sander, hand sander or floor sander.

Put on a respirator, and sand the entire surface of the floor lightly.

When the sheen is off the surface, scuff sanding is complete..

Tapas Bose

Guest

How do you smooth concrete after it dries?

Sand the Surface and Wash the Concrete Finish by fine-tuning with light sandpaper, until the surface is perfectly smooth. We recommend using a hand planer to smooth and compact the surface. If the concrete dries a lot then we recommend that you add water to the surface, this will help you give it a good finish.

erb

Guest

How much concrete do I need for a 40x60 slab?

The use determines the thickness. So if you take the surface area and multiply it by the thickness you will get the volume. Ie. 40 feet × 60 feet × 1 foot thick would be 2400 cubic feet of concrete divide by 27 to get cubic yards 2400÷27= 88.889.

Renshaw

Guest

How long after pouring concrete can you stamp it?

“But, in general, when you can touch the concrete and not have any sand on your hand, it's about time, when that laitance is crusted enough, to put a release agent on there. Generally, it's within an hour or two.” Frazier recommends getting enough stamps to cover at least the width of the slab.

GWW

Guest

How do you cut cement board by hand?

Lay your cement board flat, and draw a line with a carpenter's pencil where you intend to cut. Place a straightedge along the line and drag either a drywall utility knife or a scoring tool against it. Repeat your cuts two to three times to make them deeper, which will make snapping the board easier.

Paul Razvan Berg

Guest

How do you quote a concrete slab?

Take the length of the concrete slab x the width of the slab to get the total square footage. Multiply the total square footage by 6 (dollars) to get the total price. L x W x $6.00 in this example. Those are the basic materials and labor included in the cost of a concrete slab.