Best answer

6 inchesIf they will be subject to occasional use by garbage trucks, RVs or other heavy vehicles, the recommended thickness may be 6 inches or more. Parking Lots: Most parking lots will need concrete pavement that is at least 6 inches deep. If heavyweight trucks will also be allowed, the thickness must be increased.

Answered by: Quang Hoang Date created: Jun 24, 2022

How thick should my concrete slab be?

Asked By: Zohaib Ijaz Date created: Jun 24, 2022

4 inchesStandard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

Answered By: Adam Dymitruk Date created: Jun 26, 2022

How thick should plaster skim be on plasterboard?

Asked By: Jeff Widman Date created: Jun 25, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set. Cover the entire surface in one go — don't stop halfway.

Answered By: Shady Aziza Date created: Jun 25, 2022

How thick should plaster be on plasterboard?

Asked By: Scott Arciszewski Date created: Jun 25, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: Chase Florell Date created: Jun 26, 2022

How thick should a concrete slab be for a mobile home?

Asked By: gregsdennis Date created: Jun 14, 2022

4 to 6 inches

Answered By: jfs Date created: Jun 16, 2022

How long should cement board screws be?

Asked By: Adam Franco Date created: Jun 12, 2022

Cement board attached to plywood or similar underlayment will hold with only 1 1/4-inch screws; for thick or heavy metal fixtures, use 1 5/8-inch screws. In general, 1 1/2-inch galvanized nails will hold the board firmly in place.

Answered By: David Date created: Jun 12, 2022

How long should concrete cure before putting weight on it?

Asked By: codejockie Date created: Jun 16, 2022

When waiting for concrete to dry, keep these timeframes in mind: 24 to 48 hours - after inital set, forms can be removed and people can walk on the surface. 7 days - after partial curing, traffic from vehicles and equipment is okay. 28 days - at this point, the concrete should be fully cured.

Answered By: warvariuc Date created: Jun 16, 2022

How thick does a concrete slab need to be for a garage?

Asked By: bartonjs Date created: Jun 10, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: mck Date created: Jun 11, 2022

How thick should tile cement be?

Asked By: Jossef Harush Date created: Jun 21, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: Nico Zhu - MSFT Date created: Jun 21, 2022

How thick should a concrete driveway be?

Asked By: Raghunandan Date created: Jun 23, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: Alexander Mokin Date created: Jun 26, 2022

How much does a concrete sleeper weigh?

Asked By: Ravi Thummar Date created: Jun 24, 2022

How heavy are the concrete sleepers? A plain concrete sleeper weighs approximately 75 kg for a 80mm thick and our pattern concrete sleeper weigh approximately 80kg. We also stock heavy duty sleepers for larger commercial retaining walls and can weigh up to 150kg each. 3.

Answered By: Engineer Date created: Jun 27, 2022

Related Question Answers

nneonneo

Professor

How thick should a cement driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Collin Jackson

Professor

How heavy should a concrete sledge hammer be?

Standard sledgehammers measure between 7 and 15 pounds. Typical projects for a standard-size sledgehammer include removing walls, breaking concrete, and other DIY demolition and renovation tasks. Heavy-duty sledgehammers have heads that weigh 16 pounds or more.

Oliver

Professor

How thick should a concrete slab be for a basketball court?

3500 PSIBase Material Many basketball courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance.

josh3736

Professor

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

billynoah

Professional

How long should concrete cure before you can drive on it?

30 daysYour new concrete is designed to reach 90% of its full strength potential after 7 days, so feel free to drive your personal vehicle on it then.

It will take additional time before you can drive or park heavy equipment or machinery on your newly poured concrete, so make sure to wait at least 30 days..

Shaido

Professional

How thick should a concrete slab be for a shop?

Five to six inchesFive to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks.

To prepare the base, cut the ground level to the proper depth to allow for the slab thickness..

Simon Martinelli

Professional

How long does a bucket of cement take to dry?

24 to 48 hoursCuring Time for Concrete But to answer the question of, “How long does concrete take to set?” concrete setting time is generally 24 to 48 hours. At this point the neighborhood dog will not leave his footprints in it, but you should keep it clear of heavy equipment during this time period.

Casimir Crystal

Professional

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

Sergey Vlasov

User

How long should I let concrete cure?

HOW LONG DOES IT TAKE FOR CONCRETE TO CURE?24 to 48 hours - after inital set, forms can be removed and people can walk on the surface.7 days - after partial curing, traffic from vehicles and equipment is okay.28 days - at this point, the concrete should be fully cured.

bad_coder

User

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

Rissmon Suresh

User

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

leaf_yakitori

Guest

How thick should concrete resurfacer be?

1/2 inchUnlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

Macmade

Guest

How thick does a concrete garage floor need to be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it.

Building codes offer requirements for the concrete mix, which vary by region.

The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix..

Super Jade

Guest

How thick does a concrete sidewalk need to be?

100mmSidewalks should be at least 4" (100mm) in thickness.

Simple slabs for small foundations, bases, etc., normally 4" to 6" (100mm to150mm) thick, depending on the load they must bear.

Slope the walk away from buildings to provide proper drainage..

oz123

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

Angew is no longer proud of SO

Guest

How thick should a concrete drive be?

For a standard driveway your sub-base should be at least 100mm deep (the same depth as the concrete), rising to 150mm if you plan to park larger vehicles on it. The hardcore sub-base needs to be in place and compacted before any ready-mix concrete arrives.

Heath Borders

Guest

How thick should a concrete pool deck be?

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

T.Todua

Guest

How long should I let concrete dry?

When waiting for concrete to dry, keep these timeframes in mind:24 to 48 hours - after inital set, forms can be removed and people can walk on the surface.7 days - after partial curing, traffic from vehicles and equipment is okay.28 days - at this point, the concrete should be fully cured.

stuartd

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

Developine

Guest

How thick does concrete need to be to not crack?

4 inchesApplied-load cracking. In residential concrete, 4 inches is the minimum thickness for walkways and patios. Garage slabs and driveways should be 5 to 6 inches thick if any heavy truck traffic is anticipated, otherwise 4 inches is adequate.

Tim Roberts

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

aL3xa

Guest

How thick should a reinforced concrete driveway be?

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

dev

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

Joseph Mansfield

Guest

How many inches of concrete do I need for a garage?

fourThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

avdeluca

Guest

How many inches thick should a concrete patio be?

4 inchesMinimum standards for the construction of concrete patios will generally apply to ensure that safety is maintained. The minimum thickness of any concrete slab is 4 inches. However, if the concrete patio will have heavy features added to it, you may want to thicken it to 6 or 8 inches.

Davin Tryon

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

alcohol

Guest

How thick should a concrete porch be?

4 inchesWe generally try to maintain a minimum thickness of any slab at 4 inches, if the patio will have heavy features added on it, you may want to thicken it to 6 or even 8 inches, at least under the area where the feature will be added..

Navelvynnor

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

g.pickardou

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.

BЈовић

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

leaf_yakitori

Guest

How long does a bucket of concrete take to dry?

But to answer the question of, “How long does concrete take to set?” concrete setting time is generally 24 to 48 hours. At this point the neighborhood dog will not leave his footprints in it, but you should keep it clear of heavy equipment during this time period. Most mixes are cured at 28 days.

Tomasz Mularczyk

Guest

How long does concrete take to harden?

Generally, concrete sets in 24 to 48 hours allowing for you to walk on it and partially cured within a week (keep the cement free and clear of heavy equipment during this period) at which you can continue building/construction. Most mixes fully cures at 28 days.

Georgy

Guest

How long does it take 5 inches of concrete to cure?

When waiting for concrete to dry, keep these timeframes in mind: 24 to 48 hours - after inital set, forms can be removed and people can walk on the surface. 7 days - after partial curing, traffic from vehicles and equipment is okay. 28 days - at this point, the concrete should be fully cured.

Jonas

Guest

How long does it take for a bag of cement to dry?

Generally, concrete sets in 24 to 48 hours allowing for you to walk on it and partially cured within a week (keep the cement free and clear of heavy equipment during this period) at which you can continue building/construction. Most mixes fully cures at 28 days.

duhaime

Guest

Do you need to put rebar in concrete driveway?

For a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. One common building reinforcement material is rebar.

Prestaul

Guest

How big can a concrete slab be without expansion joints?

Usually, expansion joints should be no farther apart than 2 to 3 times (in feet) the total width of the concrete (in inches). So for a 4 inch thick concrete slab, expansion joints should be no more than 8 to 12 feet apart.

Jap Mul

Guest

How thick is a concrete driveway?

75-100mmConcrete paths should be 75-100mm thick, whereas drives, garage bases or hardstandings should be at least 100mm thick. For heavier use, such as large vans, use a 150-200mm thick concrete slab.

Michal Trojanowski

Guest

How thick should a concrete garage floor be?

Standard Thickness The standard concrete garage floor is six inches thick and, with use of proper control joints, should be thick enough to withstand normal use.

A5C1D2H2I1M1N2O1R2T1

Guest

How thick should a concrete shower pan be?

Thickness for Concrete Shower Pan – Base Layer The shower pan base mortar layer thickness should be approximately ½ to 1 inch thick. Since the shower floor already has a pre-slope, just apply a base mortar layer that has an even thickness throughout the shower floor area.

CyberEternal

Guest

How thick should a concrete sunroom be?

Four inches is the minimum thickness for a concrete patio.

You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub..

Patrick Shaughnessy

Guest

How thick should a load bearing concrete wall be?

Therefore I recommend that all the walls should be at least 9 inch thick. 4.5-inch thick walls are not structurally safe if they are beyond 7 feet in height or carry some imposed load.

Webert Lima

Guest

How many inches thick should a concrete driveway be?

four inches thickAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.