Best answer

Tool #1: Sledgehammer + Pry Bar When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.

Answered by: Barmar Date created: Jun 26, 2022

What is normal concrete cracking?

Asked By: Ben Jackson Date created: Jun 10, 2022

Probably the single most common reason for early cracks in concrete is plastic shrinkage. When the concrete is still in its plastic state (before hardening), it is full of water. This water takes up space and makes the slab a certain size. As the slab loses moisture while curing it gets a bit smaller.

Answered By: John Bode Date created: Jun 11, 2022

How do you make plaster dry faster?

Asked By: Willem van der Veen Date created: Jun 15, 2022

There are a few ways to speed up the process. Some are advices whilst others can actually damage your finished product. The best way is to use heaters. If you want your walls to dry faster then plant a few heaters around the worked area and let the plaster dry naturally.26 Jun 2017

Answered By: Christophe Date created: Jun 17, 2022

Can you speed up plaster drying?

Asked By: Abimaran Kugathasan Date created: Jun 08, 2022

There are a few ways to speed up the process. Some are advices whilst others can actually damage your finished product. The best way is to use heaters. If you want your walls to dry faster then plant a few heaters around the worked area and let the plaster dry naturally.

Answered By: Alexis C. Date created: Jun 09, 2022

What do you seal plaster with?

Asked By: jrok Date created: Jun 10, 2022

You first need to seal new plaster to make it less absorbent and to help the topcoat adhere better. A common way to seal it is with watered-down emulsion (known as a mist coat), as the plaster sucks up the water and becomes less absorbent.

Answered By: rayryeng Date created: Jun 13, 2022

What is reinforce concrete slab?

Asked By: Ivan Date created: Jun 11, 2022

A reinforced concrete slab is a crucial structural element and is used to provide flat surfaces(floors and ceilings) in buildings. On the basis of reinforcement provided, beam support, and the ratio of the spans, slabs are generally classified into one-way slab and two-way slab.

Answered By: Alexander Kim Date created: Jun 12, 2022

What is the best concrete mix ratio?

Asked By: simhumileco Date created: Jun 19, 2022

A concrete mix of 1 part cement : 2 parts sand : 4 parts coarse aggregate should be used for a concrete slab. Concrete must be placed within half an hour of mixing.

Answered By: Ogglas Date created: Jun 22, 2022

Can concrete break ice?

Asked By: Rafa Guillermo Date created: Jun 21, 2022

When the ground freezes, so does the water trapped within your concrete slab. As this happens, it expands and puts pressure on the slab from within. ... Once the weather warms up and water in the slab begins to melt, the concrete can flake and crack.

Answered By: Jayprakash Dubey Date created: Jun 24, 2022

What is the best insulation for concrete walls?

Asked By: textual Date created: Jun 21, 2022

The best way to insulate the interior side of a basement wall is with foam insulation that is adhered to or sprayed directly on the concrete. Any of the following insulation materials are acceptable for this purpose: closed-cell spray polyurethane foam or either XPS, EPS, or polyisocyanurate rigid foam.

Answered By: coobird Date created: Jun 24, 2022

What type of construction is concrete tilt up?

Asked By: Akash Kumar Verma Date created: Jun 21, 2022

Tilt-up, tilt-slab or tilt-wall is a type of building and a construction technique using concrete. Though it is a cost-effective technique with a shorter completion time, poor performance in earthquakes has mandated significant seismic retrofit requirements in older buildings.

Answered By: i_am_jorf Date created: Jun 23, 2022

Can a concrete slab be too thick?

Asked By: Jeremy Kahan Date created: Jun 19, 2022

If the slab is too thin, it may break under load and fail before its time. If the slab is too thick, it costs more than it should. Slab thickness is a major factor in the cost of a concrete floor, so there's often pressure, which can become intense, to make the slab as thin as possible.

Answered By: Krumelur Date created: Jun 20, 2022

Related Question Answers

Tomáš Zato - Reinstate Monica

Professor

How can you make plaster dry faster?

There are a few ways to speed up the process. Some are advices whilst others can actually damage your finished product. The best way is to use heaters. If you want your walls to dry faster then plant a few heaters around the worked area and let the plaster dry naturally.

HellCatVN

Professor

What is safe to put on concrete for ice?

Experts agree that calcium chloride is the best ice melt for concrete surfaces. Being a hygroscopic compound, it absorbs moisture and thereafter, starts dissolving. The dissolving process is exothermic and generates heat of up to 60 degrees Celsius.

Nick Craig-Wood

Professor

What is the best concrete to fill cracks?

If you are after the best concrete crack repair epoxy, then Rust-Oleum is always a top brand to consider. This two-part epoxy concrete repair kit is the ultimate option for high-strength and durability. The kit is suitable for indoor and outdoor use, and it can efficiently patch up cracks and holes in concrete.

goofballLogic

Professor

What is the best way to clean concrete driveway?

Sweep the concrete surface, then spray the stained area with a garden hose to rinse away dirt. In a large plastic bucket, mix ½ cup of liquid dish detergent into 3 gallons of hot water. (Or, for the best results on tannin stains, use a powdered laundry detergent that's advertised as being good at removing food stains.)

Pritom Sarkar

Professor

What type of hardwood flooring is best for concrete slab?

engineered wood floorA floating floor is the perfect companion for a concrete subfloor. According to flooring experts, the best kind of wood flooring to use with a concrete subfloor is a floating engineered wood floor. This kind of floor performs well, resists moisture and is easy to install.

BalusC

Professional

What is the best concrete patch product?

At A Glance: Our Top Picks for Best Concrete PatchRust-Oleum 215173 301012 Concrete Patch ( Check Price On Amazon ) -Top Pick.Dap 32611 Phenopatch Pre-Mixed Concrete Patch ( Check Price On Amazon ) -( Runner-up )DAP 37584 Liquid Cement Crack Filler ( Check Price On Amazon ) -( Runner-up )More items...

Mike Seymour

Professional

How do you break concrete slab?

With small slabs of concrete, such as patio squares or air conditioner pads, you can also have one person pry up the slab a few inches, using a demolition bar, while another person strikes the slab with the hammer. Prying up the slab has the same effect as digging underneath it.

Matthias J. Sax

Professional

What is the best way to cut cement board?

Score-and-Snap The simplest way to cut cement backer board is to score the surface and snap the sheet along the scored line, similar to the way you'd cut drywall.

In fact, you can use a drywall utility knife to score backer board, but a better option is a carbide-tipped scoring tool..

M.P. Korstanje

Professional

What is the best concrete caulk?

Take a look at the top products below to get an idea of what the best exterior caulk for you might look like.BEST OVERALL: DAP Dynaflex 230 Sealant.BEST FOR CONCRETE: Sashco Slab Concrete Crack Repair Sealant.BEST FOR WINDOWS AND DOORS: GE Sealants & Adhesives Window & Door Sealant.More items...

Md. Abu Taher

Professional

How do you break a concrete slab without a jackhammer?

Here's a few tips:Recruit a buddy to lift a corner with a pry bar. Start slamming at the corners and work your way towards the center. ... Pry and pull out the broken chunks as they break apart.Don't hit the same spot twice. Keep moving and keep lifting with that pry bar.

Stefan Svrkota

User

What is concrete cylinder test?

Concrete Cylinder Testing at CSI Consulting Services, Inc. ... The compressive strength of hardened concrete is tested in a process of pouring cylinders of fresh concrete and then measuring the amount of force required to break up this concrete at proscribed intervals during the concrete hardening time line.

dnephin

User

What is the best way to waterproof a concrete roof?

Resincoat Roof Sealer & Waterproof Coating is the best way to seal and waterproof a damaged concrete roof. The formula will adhere to the splits and cracks in the roof leaving a waterproof finish that protects against leaks.

Samantha J T Star

User

What removes oil stains from concrete driveway?

The four best ways to remove oil stains from concrete are:Wash away the oil with a strong detergent, and a scrub brush or sponge.Use a concrete cleaner or degreaser to loosen and remove the oil.Apply a poultice that will break down the oil and suck it from the concrete.More items....

sds

User

Can you break up concrete with a sledgehammer?

When thinking about breaking up concrete, most of our minds jump straight to jackhammer. But you can probably do the work with a metal sledgehammer and a little elbow grease. Sledgehammer is the best tool to use if the slab of concrete is three inches thick or less.

yojimbo87

Guest

How do you break up a thick concrete slab?

Start to break the concrete, starting six inches from the edge and working your way in. For slabs less than four inches thick, use a sledgehammer. For more than four inches thick, use a demolition hammer.

Cristian

Guest

What is the best insulation for under a concrete slab?

Applying a bead of polystyrene-compatible caulk or mastic to the top of the insulation board minimizes water infiltration behind it. For under-slab applications, the rigid foam insulation typically should be installed over a gravel base, with a poly vapor diffusion retarder between the gravel and insulation.

Harshal Lonare

Guest

Is concrete overlay any good?

Concrete overlays are only as good as the surface, it is being applied to. You need to keep in mind that if the concrete is cracked or surfacing up, then the overlay will also break and come up. You need to be sure that if the concrete is heavily damaged, your overlay won't last long.

Zaheer Ahmed

Guest

How long does it take to cut concrete slab?

In hot weather conditions, saw cutting may start as soon as four hours after the concrete is poured. In cooler weather, sawing may not start for 12 hours after pouring. 1 The best way to determine whether the slab is ready is to make trial cuts to check for raveling.

Anomie

Guest

How do you break up concrete in a pipe?

First cut the pipe flush with the floor (to give you room to work) and stuff a rag into the pipe. Then drill a series of holes straight down, about 2"- 3" deep, all the way around the pipe about 1/2" apart from each other and 1/2"- 3/4" away from the pipe. Then drill diagonally from hole to hole all the way around.

Guillaume Roux

Guest

Which concrete is best for slab?

Best Cement for Slab ConstructionOrdinary Portland Cement (OPC Cement)Portland Pozzolana Cement (PPC Cement)Oct 17, 2020

mkrieger1

Guest

What is the best flooring to put over a concrete slab?

laminateLike other flooring materials that work well over concrete slabs, laminate uses layers to fight moisture. This makes it a reliable option to install over your concrete slab. If you plan to transform your basement into a high traffic area for entertaining and relaxing, laminate could be a great option.

Amal K

Guest

Can you break up concrete with a hammer drill?

Hammer drills do not have a chiseling function and can be used to drill into a variety of materials. ... Demolition hammers can break, chip and chisel concrete, but they can't drill because there is no rotation of the bit.

MD SHAYON

Guest

What is the best way to seal a concrete floor?

Acrylic sealer – This easy-to-apply sealer is best for basements and other concrete floors that will not come into contact with oil or grease. Acrylic sealer sits on top of the concrete instead of seeping in, which makes it ideal for sealing interior floors.

abatishchev

Guest

How do I remove concrete from my lawn?

Steps for Removing a Concrete SlabStep 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you're working on. ... Step 2: It's Hammer Time. ... Step 3: Pull Apart and Remove the Broken Concrete. ... Step 4: Repeat Steps Until Concrete Is Demolished.Jan 16, 2019

Cristian

Guest

How do you break a concrete slab with a jackhammer?

To aid in breaking up the concrete, use a "spud bar" in conjunction with the jackhammer. Jam the flat end of the spud bar into the cracks formed by the jackhammer, firmly grip the handle with both hands and use leverage to pry chunks of concrete from the pad for removal.

Tanner Dolby

Guest

How do you break concrete at home?

InstructionsCover the concrete slab with 4 mil plastic sheeting if you're working near windows.Dig under the concrete if you're able to do so.Start to break the concrete, starting six inches from the edge and working your way in. ... Pry with a long bar or wrecking bar as you go. ... Cut any mesh wire with bolt cutters.More items...•Oct 14, 2019

Murali Allada

Guest

How do you remove old concrete driveway?

If you're working by hand:Starting at a corner, break up a small section of the driveway using your jackhammer.If necessary, use a sledgehammer to break any large chunks of concrete into smaller pieces.Use a shovel and wheelbarrow to move the debris into your concrete dumpster or pickup truck.More items...•Apr 18, 2017

arshajii

Guest

What is the best way to remove adhesive from concrete floor?

Here are our recommended steps to take.Step 1: Scrape the concrete glue. Scrape off as much of the concrete glue as possible. ... Step 2: Apply boiling water. ... Step 3: Scrub the loosened glue. ... Step 4: Apply glue remover. ... Step 5: Sand the floor. ... Step 6: Troubleshoot.

Konrad Viltersten

Guest

How do you sand a concrete wall?

What is the best way to sand concrete? The best way to fix concrete and sand a smoother finish is to use an orbital sander with fine-grit sandpaper, or wet and dry sandpaper for small specific areas. After sanding a few coats of acid wash will help remove sandpaper scratches.

Ben Bolker

Guest

How do you seal plaster molds?

RE: best way to seal plaster mold You can use epoxy to finish off the plaster. Pour some in the mold and wipe it around with a paper towel. Wipe up all the excess with paper towels. let it dry and repeat 3 or 4 times.

Nikita

Guest

How do you stick tile to a concrete wall?

Start by putting tiles on the bottom of the wall and work your way up. It's best to use a V-notch trowel to layer and evenly spread the mastic or adhesive for wall tile installations. Use spacers between each tile for the grout. When the entire wall is finished, tap tiles that are slightly raised with a rubber mallet.

natemcmaster

Guest

Is laying concrete hard?

Pouring concrete is fast-paced work. For large slabs, it's best if the truck can back up to the concrete forms. Avoid hot, windy days if possible. This kind of weather accelerates the hardening process—a slab can turn hard before you have time to trowel a nice smooth finish.

CristiFati

Guest

How much does a 30x30 concrete slab cost?

How much is the cost of a 30x30 concrete slab? A 30x30 foot concrete slab costs about $5,400 including installation. This is for 6-inch thickness, but can go up or down depending on what your concrete pro recommends.

jellycsc

Guest

What is the best base for a concrete slab?

Most concrete contractors want a mix of coarse and fine aggregate to create a compactable base that is going to be safe for settlement and drainage. Crusher run (a mix of crushed stone and stone dust) is one of the best base materials for concrete flatwork.

Hans Z.

Guest

What is the best concrete crack sealer?

QUIKRETE Concrete Repair, QUIKRETE Gray Concrete Crack Seal or QUIKRETE Self-Leveling Polyurethane Sealant may be used. Widen the crack using a chisel and hammer to a minimum of ¼ inch and break away any deteriorating concrete (the edges of the crack should be vertical or beveled in an inverted “v”).

Oscar Godson

Guest

What is the best way to apply concrete sealer?

How to Apply Concrete SealerRemove all oil, grease, stains, dirt, and dust from the concrete.Strip any existing sealer from the surface.Open up the concrete with an etching solution.Apply a thin coat of sealer using a roller or sprayer.Wait for the first layer of sealer to dry.Apply a second coat in the opposite direction.More items...

OMR

Guest

What is the best way to clean a concrete driveway?

Use a hose or pressure washer to remove all leaf matter and debris.

Apply the organic detergent to the damp concrete and let it sit for 10 to 15 minutes.

Scrub vigorously with a stiff broom or scrub brush.

Rinse and repeat the process if necessary..

Alireza Fattahi

Guest

What is the best way to clean a concrete garage floor?

Don't underestimate the power of warm, soapy water to keep your floors clean and remove minor stains. Mix about one-third cup powdered laundry detergent in a gallon of warm water, and scrub with a nylon-bristle brush. After cleaning your garage floor, always rinse with your power jet wand.

Reto Koradi

Guest

What is the best way to clean up concrete dust?

Mix equal parts of vinegar and water (50/50). This acidic mixture works well for cleaning concrete dust. This mixture can damage your tiles, so we recommend that you test it on a surplus tile first. Also be cautious with acids on marble and other calciferous natural stone.

Yuriy Faktorovich

Guest

What is the best way to finish a concrete floor?

Top Concrete Finishing OptionsAcid Stain. An acid stain for concrete floor has a very bold look, recognizable by its mottled appearance and highly variegated finish. ... Water-Based Stain. ... Fast Stain. ... Acrylic Sealer. ... Standard Epoxy. ... Metallic Epoxy. ... Terrazzo or Granite Epoxy. ... Quartz Sand Epoxy.

Philipp

Guest

What is the best way to hang pictures on plaster walls?

Method 2 Medium to Heavy Pictures

  1. Determine where to hang your picture.
  2. Place painter's tape over the mark.
  3. Place another bit of tape below the hole.
  4. Carefully drill a hole into the plaster.
  5. Hammer an anchor into the wall.
  6. Fix the screw into your anchor.
  7. Clean the area.
  8. Hang up the picture.

Anthony Williams

Guest

What is the best way to hang things on plaster walls?

Light Items Screws (and screws with masonry anchors for heavy items) are your best choice for hanging things on plaster walls without picture rail. For lighter items, simply screwing into the plaster with a 1 1/4” drywall screw is usually enough to get the job done.

lrn

Guest

What is the best way to plaster over Artex?

Ensure surface is clean, dry and firmly bonded to the background. Lightly dampen the surface with a large, wet sponge. Remove any loose or prominent texture 'nibs' using a stripping knife (or spatula provided, if using Smooth-It kit) Apply Artex Stabilex liberally, to seal the surface, and allow to dry.

Koushik Roy

Guest

What is the purpose of plastic sheeting under a concrete slab?

The sand layer cannot dry downwards by vapor diffusion because of the plastic sheet—it is a vapor barrier after all. In fact that's why we have it under the slab. We want a vapor barrier under the slab. ** We want to prevent water vapor from coming up from the ground into the concrete slab.

Alex Koshelev

Guest

What can you cover cracked concrete with?

Lastly, the most popular way to patch up cracks formed in concrete is with polymer resin. This option is the most expensive DIY option as it not only fills the entire depth of the break but also forms a permanent chemical bond with the concrete slab, gluing the slabs together to seal it from any structural moisture.

Kaiido

Guest

What concrete product is best in molds?

Liquid rubber is a great way to make durable perfectly smooth molds. There are two main suppliers of urethane rubber for concrete molds: Smooth-On and Polytek. Both make polyurethane rubbers that come as two-part liquids (resin and hardener).

Chris Schmitz

Guest

Will concrete overlay last?

Concrete overlays are only as good as the surface, it is being applied to. You need to keep in mind that if the concrete is cracked or surfacing up, then the overlay will also break and come up. You need to be sure that if the concrete is heavily damaged, your overlay won't last long.

Mike Thomsen

Guest

What is the best way to remove concrete sealer?

The removal of old concrete sealer can be done in one of two ways: mechanical or chemical. The mechanical way involves using some kind of tool to physically grind, sand, or blast away the sealer. This method can be noisy and damaging to the concrete.