Best answer

30 pounds on average.

Answered by: Set Date created: Jun 25, 2022

How thick should my concrete slab be?

Asked By: Lord Date created: Jun 15, 2022

4 inchesStandard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

Answered By: Mark Rogers Date created: Jun 18, 2022

Can you use 1/4 inch cement board on floors?

Asked By: ColinD Date created: Jun 16, 2022

Floors. Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment. They also require a 3/4-inch subfloor where tile size exceeds 12 inches.

Answered By: whiletrue Date created: Jun 16, 2022

How many bags of cement does it take to make 100 blocks?

Asked By: Blaze_droid Date created: Jun 12, 2022

Mixed with sand in the proper 3 to 1 ratio will lay 40 twelve inch blocks or 50 eight inch blocks. So, if laying 8 inch block, you should be able to lay 100 blocks with 2 bags of mortar.

Answered By: Jim Date created: Jun 15, 2022

How do you hang something heavy on a plaster wall?

Asked By: TheIceBear Date created: Jun 24, 2022

Screws (and screws with masonry anchors for heavy items) are your best choice for hanging things on plaster walls without picture rail.

For lighter items, simply screwing into the plaster with a 1 1/4” drywall screw is usually enough to get the job done..

Answered By: rink.attendant.6 Date created: Jun 26, 2022

How long should cement board screws be?

Asked By: Gaël Marziou Date created: Jun 25, 2022

Cement board attached to plywood or similar underlayment will hold with only 1 1/4-inch screws; for thick or heavy metal fixtures, use 1 5/8-inch screws. In general, 1 1/2-inch galvanized nails will hold the board firmly in place.

Answered By: Bob Snyder Date created: Jun 28, 2022

How thick should cement board be under tile floor?

Asked By: Florin Dobre Date created: Jun 24, 2022

Floors: A 1/4-inch minimum thickness is needed, but thicker panels are also fine. Walls: Use 1/2-inch or 5/8-inch-thick cement board, not 1/4-inch. The extra thickness is needed to span the studs and provide a solid base for the tile.

Answered By: gsamaras Date created: Jun 24, 2022

Can I put plywood over concrete floor?

Asked By: Mark Hildreth Date created: Jun 20, 2022

Plywood-on-slab. Place a 6-mil polyethylene vapor retarder directly over the concrete. Lay 3/4-inch plywood sheets opposite to the direction of the finish flooring, leaving a 1/4-inch gap between panels to eliminate squeaking. Fasten the plywood to the concrete using powder-actuated fasteners or concrete nails.

Answered By: Tanaike Date created: Jun 23, 2022

Is concrete block a good insulator?

Asked By: yckart Date created: Jun 16, 2022

Concrete block makes a cost-effective and structurally sound wall, but it has little thermal resistance. Depending on the density of the blocks, an 8-inch thick block wall without any other type of insulation has a thermal resistance value between R-1.9 and R-2.5.

Answered By: Ryan McGeary Date created: Jun 17, 2022

How heavy are precast concrete steps?

Asked By: Rahul Sharma Date created: Jun 13, 2022

3ft. Wide StepsCodeDescriptionWeight361S1 Step90 lbs.361SWP1 Step with Platform450 lbs.362S2 Step375 lbs.362SWP2 Step with Platform975 lbs.4 more rows

Answered By: Constantinius Date created: Jun 14, 2022

How much concrete do I need for a 10x10 slab?

Asked By: Sam Varghese Date created: Jun 15, 2022

For a 10 x 10 slab, we'd suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

Answered By: Mike Date created: Jun 18, 2022

Related Question Answers

Piglet

Professor

What is the size of a 4 inch concrete block?

A 4-inch CMU has an actual size of 3 5/8 inch x 7 5/8 inch x 7 5/8 inch (DxHxL). The nominal size is then 4 x 8 x 8. This is the smallest concrete block size.

Osama Bin Saleem

Professor

Can I use 1/4 cement board on floors?

Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment.

Abizern

Professor

How do you attach plywood to concrete floor?

Plywood-on-slab. Place a 6-mil polyethylene vapor retarder directly over the concrete. Lay 3/4-inch plywood sheets opposite to the direction of the finish flooring, leaving a 1/4-inch gap between panels to eliminate squeaking. Fasten the plywood to the concrete using powder-actuated fasteners or concrete nails.

ScottyBlades

Professor

How do you glue a broken concrete back on?

Spread a heavy layer of Loctite Metal And Concrete Epoxy on the surfaces to be joined and press the broken piece into position, leaning a heavy block against the repair until the epoxy sets. Leave undisturbed for 24 hours.

kmario23

Professional

Does concrete stick to drywall?

You can glue drywall sheets to a concrete block wall. Drywall is usually attached to wall studs with 2-inch drywall screws using an electric drill with a driver bit installed. However, in some installations, such as in a basement, it is necessary to glue drywall sheets to the interior of concrete block walls.

Aaron

Professional

How thick is a concrete basketball court?

You need: A slab at least 4 inches thick, with material at least 3,000-3,500 pounds per square inch (PSI) Rebar 1/2 inch thick to support the concrete..

miku

Professional

How high can a concrete block wall be?

The minimum wall thickness is 6 inches also. It is not uncommon to create designs with an h/t from 32 to 50. That could produce wall heights of up to 33 feet for walls built with 8-inch concrete masonry units (CMU), 41 feet for 10-inch CMU, and 50 feet for 12-inch CMU.

Yuchen

Professional

Can I put concrete in my mailbox?

Avoid unyielding supports such as metal or concrete posts, and instead use a 4 x 4-inch wooden support or a 2-inch diameter standard steel or aluminum pipe. Insert the mailbox post into the hole.

ktiu

User

How many bags of mortar do I need to fill concrete block?

The area is 200 SF, which requires 225 blocks (1-1/8 x 200 = 225 blocks). Three bags of mortar are estimated for every 100 block, therefore 6-3/4 bags of mortar are needed ((225 block x 3 bags mortar) / 100 block = 6-3/4 bags of mortar).

Avi Flax

User

How thick does a concrete slab for a shed need to be?

4-inchA 4-inch slab is generally a good thickness for a typical shed. This concrete floor can be poured in most locales on a 4-inch base of compacted gravel. That requires an excavation of at least 6 inches to make a slab that will be 2 inches above the surrounding ground.

Anand Tripathi

Guest

How thick does concrete need to be for a shed?

A 4-inch slab is generally a good thickness for a typical shed.

This concrete floor can be poured in most locales on a 4-inch base of compacted gravel.

That requires an excavation of at least 6 inches to make a slab that will be 2 inches above the surrounding ground..

Traveling Tech Guy

Guest

How thick is a stamped concrete overlay?

1/4 to 3/4 inchThe overlay mix is usually applied by a gauge rake (a tool with an adjustable depth gauge for achieving a uniform topping thickness), and then imprinted with stamping mats or texturing skins. Overlay thicknesses range from 1/4 to 3/4 inch, depending on the depth of the imprint.

Jo Liss

Guest

How heavy is a 7n concrete block?

Medium Dense Concrete BlockSizes (mm)Compresive Strength (N)Weight (kg)440 x 100 x 2157.3N & 10.4N13.8440 x 140 x 2157.3N & 10.4N19.3

Amsakanna

Guest

How heavy is a concrete block in KG?

(Superseding British Standard BS 6073-1)Type of blockSolidHollowAverage Block Weight (kg)14.626.5Gross Dry Density (kg/m3)18501850Approximate Unrendered Wall Weight (kg/m2)154280Thermal Conductivity (W/mK @ 3% moisture content)1.181.188 more rows

Justin

Guest

How much does a 6 inch concrete block cost?

These prices assume the blocks have a height of 8 inches and a length of 16 inches, with open cells....CMU Block Pricing.Block WidthCost4”$1.356”$1.358”$1.5010”$1.851 more row

Shelly Pritchard

Guest

What size is a 4 inch concrete block?

Concrete Block (CMU) SizesCMU SizeNominal Dimensions D x H x LActual Dimensions D x H x L4" CMU Full Block4" x 8" x 16"3 5/8" x 7 5/8" x 15 5/8"4" CMU Half-Block4" x 8" x 8"3 5/8" x 7 5/8" x 7 5/8"6" CMU Full Block6" x 8" x 16"5 5/8" x 7 5/8" x 15 5/8"6" CMU Half-Block6" x 8" x 8"5 5/8" x 7 5/8" x 7 5/8"6 more rows•Nov 10, 2019

Nitzan Tomer

Guest

Can you put concrete in a dumpster?

Heavy debris, such as: concrete, asphalt, dirt, and brick, can be thrown in most dumpsters, however due to its weight, Express Roll-Off only allows 15 Yard dumpsters (filled 3/4 high) for these heavy materials. Asphalt roofing shingles are another category of heavy debris that can go in a dumpster.

Wizhi

Guest

How thick does concrete need to be to not crack?

4 inchesApplied-load cracking. In residential concrete, 4 inches is the minimum thickness for walkways and patios. Garage slabs and driveways should be 5 to 6 inches thick if any heavy truck traffic is anticipated, otherwise 4 inches is adequate.

Farhad Farahi

Guest

How thick is the wall of a concrete block?

Some blocks are solid, in 4-inch thicknesses rather than 8. These typically are used to cap walls to provide a solid top. Some 8-inch blocks also are made with solid tops, however. Other variations for special purposes are 4-by-4-by-16 or 4-by-6-by-16 inches.

Michael Haren

Guest

How much weight can a concrete block wall support?

1,700 poundsAs per standards published in 2003 by ASTM, an international building standards non-profit, all concrete blocks must support at least 1,700 pounds of weight per square inch (PSI).

Vino

Guest

How long does it take 4 inch concrete to dry?

After 7 days, the concrete will have gained around three quarters of its compressive strength, but you should refrain from driving vehicles or heavy machinery over the surface until after the 28 day mark.

For domestic mixes – driveways, for example – you can expect the concrete to be set within 24-48 hours..

synthesizerpatel

Guest

How many bags of cement do I need for 100 square feet?

Ans.

:- 7.6 no of cement bags (381.30 kgs) are required for 100 sq ft rcc roof slab 4 inch thick m20 grade concrete.

Ans.

:- 7.6 bags (381.30 kgs), 9.5 bags (476.10 kgs) & 11.4 bags ( 570.8 kgs) cement are required for 100 sq ft rcc roof slab 4 inch, 5inch & 6 inch thick respectively in m20 grade of concrete..

Patrick Shaughnessy

Guest

How many inches thick should a concrete patio be?

4 inchesMinimum standards for the construction of concrete patios will generally apply to ensure that safety is maintained. The minimum thickness of any concrete slab is 4 inches. However, if the concrete patio will have heavy features added to it, you may want to thicken it to 6 or 8 inches.

aloisdg

Guest

What is the tolerance of a concrete slab?

Traditionally allowable tolerances of concrete floor slabs were determined by checking the slab surface with a 10 foot straightedge. Common tolerances were 1/8 inch or 1/4 inch in 10 feet.

Ginikai

Guest

How thick does the concrete need to be for a patio?

4 inchesThe minimum thickness of any concrete slab is 4 inches. However, if the concrete patio will have heavy features added to it, you may want to thicken it to 6 or 8 inches. The concrete is typically laid on a 2-3 inch base of gravel, sand, limestone, or other aggregates.

JasonM1

Guest

How thick is lath and plaster ceiling?

The minimum total thickness for plaster on gypsum board (rock lath) is Æ inch. On metal lath the minimum thickness is 5/8 inch; and for wood lath it is about 3/4 to 7/8 inch.19 Dec 2018

harrrrrrry

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

Patrick Johnmeyer

Guest

How high can you build a concrete block wall?

Are there standard design requirements for screen walls? A: You are correct. A 4-inch-thick, nonreinforced concrete masonry screen wall should not be built higher than 6 feet, 8 inches unless it is supported laterally in the horizontal or vertical direction every 6 feet, 8 inches.

Stevoisiak

Guest

What is the height of a concrete block?

Blocks come in modular sizes, with the most popular typically referred to (by their thickness) as "4-inch", "6-inch", "8-inch", and "12-inch". In the US, CMU blocks are nominally 16 in (410 mm) long and 8 in (200 mm) wide.

Brian Riehman

Guest

What is the standard size for a concrete block?

Blocks come in modular sizes, with the most popular typically referred to (by their thickness) as "4-inch", "6-inch", "8-inch", and "12-inch". In the US, CMU blocks are nominally 16 in (410 mm) long and 8 in (200 mm) wide.

Little Monkey

Guest

What weight is a 6 inch concrete block?

Technical SpecificationsDescriptionLengthApprox Weight per bale6" Block44086412" Blocks44089114" Block340572L Blocks4403684 more rows

Danziger

Guest

Can you put concrete on wood?

Installing a Concrete Floor Over a Wood Subfloor Concrete floor video on how to install concrete over an existing wood subfloor. It's best to place the underlayment over 3/4-inch-thick plywood fastened with screws at 12- to 16-inch intervals to help decrease deflection and add stability.

Narendra_Nath

Guest

How heavy is a 140mm concrete block?

Pack DetailsBlock ThicknessPack Sizes (metres)Pack Weight (tonnes)75mm solid7.21.0100mm solid7.21.4140mm solid4.81.2190mm solid3.21.22 more rows

Billy Moon

Guest

How heavy is a concrete block?

(Superseding British Standard BS 6073-1)Type of blockSolidHollowAverage Block Weight (kg)14.626.5Gross Dry Density (kg/m3)18501850Approximate Unrendered Wall Weight (kg/m2)154280Thermal Conductivity (W/mK @ 3% moisture content)1.181.188 more rows

Yash Maheshwari

Guest

How many 12 inch block will a yard of concrete fill?

Fill Volume for Various Block Wall ThicknessesBlock Wall ThicknessBlocks Filled per Cubic YardConcrete/Grout per 100 Square Feet Wall Area6″120.93 yd38″1001.12 yd310″801.3 yd312″651.73 yd3.

toskv

Guest

How many bags of cement do I need for 100 hollow blocks?

How many bags of cement does it take to make 100 blocks? Mixed with sand in the proper 3 to 1 ratio will lay 40 twelve inch blocks or 50 eight inch blocks. So, if laying 8 inch block, you should be able to lay 100 blocks with 2 bags of mortar.

Jouni K. Seppänen

Guest

How many bags of cement do I need for 100 square feet of concrete?

Ans. :- 7.6 no of cement bags (381.30 kgs) are required for 100 sq ft rcc roof slab 4 inch thick m20 grade concrete. Ans. :- 7.6 bags (381.30 kgs), 9.5 bags (476.10 kgs) & 11.4 bags ( 570.8 kgs) cement are required for 100 sq ft rcc roof slab 4 inch, 5inch & 6 inch thick respectively in m20 grade of concrete.

Peggyanigen

Guest

How much does a 4 x8 x16 concrete block weigh?

Concrete Block Size and WeightW x H x LDescriptionApp.

Weight4x8x164” Concrete Line Block264x8x164” Concrete Solid Block324x4x164x4x16 Concrete Solid Block… (Slug Block)17.54x8x164” Concrete Interlocking/Return Corner Block34.641 more rows.