Best answer

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

Answered by: Havenard Date created: Jun 26, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: Santiago Corredoira Date created: Jun 13, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: Mehran Date created: Jun 15, 2022

How much concrete do I need for a 12x20 slab?

Asked By: Gil Epshtain Date created: Jun 08, 2022

Concrete Extras With a brief look, a 12x20 area at 6 inches deep, you would need approximately 6.31 tons or 4.44 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Answered By: Suresh Vishnoi Date created: Jun 11, 2022

How many bags of cement are needed to plaster a room?

Asked By: eyllanesc Date created: Jun 12, 2022

6 bags

Answered By: Mahdi-Malv Date created: Jun 14, 2022

How many bags of cement do I need for plastering?

Asked By: Sнаđошƒаӽ Date created: Jun 24, 2022

To plaster 100 square metres (15 millimeters thick) you will need: 12 bags cement + 2,3 cubic metres sand. Using masonry cement complying with SANS 50413 class MC 22,5X or MC 12,5. To plaster 100 square metres (15 millimeters thick) you will need: 14 bags cement + 2,25 cubic metres sand.

Answered By: Diego Puente Date created: Jun 25, 2022

How many bags of cement do I need for a 2 bedroom house?

Asked By: T04435 Date created: Jun 16, 2022

40 bags

Answered By: Cristian Lupascu Date created: Jun 18, 2022

How much water do I add to plaster of Paris?

Asked By: samthecodingman Date created: Jun 22, 2022

The ideal ratio for a plaster of paris mixture is 2 parts plaster of Paris powder to 1 part water. Measure out the water and pour it into your mixing container.

Answered By: Yanick Rochon Date created: Jun 25, 2022

How do I paint a cracked plaster wall?

Asked By: Boris Callens Date created: Jun 09, 2022

Fix CracksStep 1: Prepare the Room. Before starting, cover the floor with plastic drop cloths and fasten the cloths in place using painter's tape. ... Step 2: Smooth and Patch. Smooth and remove loose plaster pieces and any jagged edges on the surface around the crack with a putty knife. ... Step 3: Sand, Prime and Paint.

Answered By: TarkaDaal Date created: Jun 10, 2022

How do I calculate how much plaster I need?

Asked By: ImportanceOfBeingErnest Date created: Jun 13, 2022

For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand). For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand). The thickness of plaster is between = 12 mm to 15 mm. Always use Good quality of cement (Different grades of cement) as well as good quality sand.

Answered By: that other guy Date created: Jun 16, 2022

How many bags of concrete do I need for a 6x6 post?

Asked By: Aakash Date created: Jun 13, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: BlueRaja - Danny Pflughoeft Date created: Jun 14, 2022

How much concrete is needed for a 10x10 room?

Asked By: Osama Bin Saleem Date created: Jun 18, 2022

14.19 cuft of cement 2. 28.38 cuft of fine aggregate.

Answered By: csharptest.net Date created: Jun 19, 2022

Related Question Answers

Trent

Professional

How much sand and cement do I need for blocks?

For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

bdukes

Professional

How much cement do I need for 1000 square feet?

About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home. Sand is not only required for preparing RCC, mortar and plaster but also used for filling and flooring too. Sand consumed is about 1200 cubic ft.

Daniel DiPaolo

Professional

How much concrete do I need for a 10x10 slab?

For a 10 x 10 slab, we'd suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

Frightera

Professional

How much sand and cement do I need for a block wall?

For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

Asad Saeeduddin

User

How much cement do I need for a 20x20 slab?

With a brief look, a 20x20 area at 6 inches deep, you would need approximately 10.52 tons or 7.41 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Zan Lynx

User

Can I plaster a room myself?

Anyone can plaster a wall (really, anyone), but you need to follow a formula. You can't just pick up a trowel and start throwing plaster on the walls. I'm going to show you how with 3 main stages: Knowing what plastering tools and general DIY tools to use.

Levi Fuller

User

How do I work out how much plaster I need?

For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand).

For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand).

The thickness of plaster is between = 12 mm to 15 mm.

Always use Good quality of cement (Different grades of cement) as well as good quality sand..

rogerdpack

Guest

How do you dry out wet plaster walls?

To dry out small spots, place a fan in front of the damp area and turn it on high. For larger spots, install a heavy-duty dehumidifier in the room to suck the water vapor out. If you need to dry out a wall in an enclosed area, place moisture absorbent materials like dehumidifier packs near the damp spots.

a2br

Guest

Do I need to seal old plaster before painting?

Fix damaged areas of the walls with a patching compound recommended for use on plaster and apply an oil-based or shellac primer to seal out moisture. Follow with a top-quality latex paint to give your old plaster a new look. Move the furniture to the center of the room. Cover the floor with drop cloths.

Cleiton

Guest

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

Eydrian

Guest

How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

johnchase

Guest

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

UMAR-MOBITSOLUTIONS

Guest

How much sand and cement do I need to plaster a wall?

To plaster 100 square metres (15 millimeters thick) you will need: 14 bags cement + 2,25 cubic metres sand. Using masonry cement complying with SANS 50413 class MC 12,5X. To plaster 100 square metres (15 millimeters thick) you will need: 20 bags cement + 2 cubic metres sand.

Golo Roden

Guest

How much water do I add to plaster mix?

The ideal ratio for a plaster of paris mixture is 2 parts plaster of Paris powder to 1 part water.

Measure out the water and pour it into your mixing container..

Tuxdude

Guest

What type of plaster do I need?

What Type of Plaster & Plasterboard Do I Need?One coat plaster. Designed to act as a 2-in-1 base coat and finish. ... Multi-finish plaster. Provides a great, smooth coverage on a variety of surfaces. ... Bonding plaster. Easy to apply and spread. ... Browning plaster. ... Hardwall plaster. ... Tough coat plaster. ... Magnetic plaster.

Matthew Groves

Guest

How much sand and cement do I need for plastering?

For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand). For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand). The thickness of plaster is between = 12 mm to 15 mm. Always use Good quality of cement (Different grades of cement) as well as good quality sand.

Asim K T

Guest

How much does it cost to plaster a room?

Plastering Price ListSize of HousePriceTime to CompletePlaster a Small Room£610-£6902-3 daysPlaster a Medium Room£660-£9002-3 daysPlaster a Large Room£1,000-£1,3753-4 daysPlaster Small Ceiling£200-£3506-10 hours5 more rows•5 days ago

Derek O

Guest

How much does a concrete safe room cost?

The cost for constructing an 8- by 8-foot safe room that can double as a closet, bathroom, or utility room inside a new home ranges from approximately $6,600 to $8,700 (in 2011 dollars), according to FEMA.

A larger 14- by 14-foot safe room runs from about $12,000 to $14,300..

thecOdemOnkey

Guest

How much does a concrete storm shelter cost?

The cost for constructing an 8- by 8-foot safe room that can double as a closet, bathroom, or utility room inside a new home ranges from approximately $6,600 to $8,700 (in 2011 dollars), according to FEMA. A larger 14- by 14-foot safe room runs from about $12,000 to $14,300.

Joakim Erdfelt

Guest

How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Martin Tournoij

Guest

How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

bdonlan

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

monkut

Guest

How much concrete do I need for fence posts?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Dávid Molnár

Guest

How many bags of plaster do I need for a room?

Well if you go by the spec a bag of Multi and Board finish will cover 10.25-75 m2 at a coverage of 2mm on Plaster board. As the manufacturer will tell you this is, of course, just a guide.

Jason Wadsworth

Guest

How many bags of plaster do you need to skim a room?

Well if you go by the spec a bag of Multi and Board finish will cover 10.25-75 m2 at a coverage of 2mm on Plaster board. As the manufacturer will tell you this is, of course, just a guide.

oligofren

Guest

How much does it cost to plaster a whole house?

Plastering Price List

Size of HousePriceTime to Complete
Plaster a Small Room£610-£6902-3 days
Plaster a Medium Room£660-£9002-3 days
Plaster a Large Room£1,000-£1,3753-4 days
Plaster Small Ceiling£200-£3506-10 hours

Gautham M

Guest

How much does it cost to plaster skim a room?

Cost of re-skimming a roomCost provided itemCost+VAT (Lower range)Typical costPlastering medium room from scratch£575£755Plastering large room from scratch£995£1,300Overboarding and plastering ceilings in a small room£210£275Overboarding and plastering ceilings in a medium room£270£3425 more rows

Yousaf

Guest

How much plaster do I mix?

Generally, you'll want to use approximately a 1:1 ratio of plaster to water—in other words, half and half.

markwalker_

Guest

How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly $6 to $11 per 100 square feet, considering you'll need $2 to $3 for pre-mixed joint compound, $0.10 to $0.50 for latex colorant, and $4 to $7 for tinted glaze.

pogibas

Guest

Can I have a wet room with a concrete floor?

If you are planning on installing a wet room drain onto a concrete floor, the most popular option is to use a screed drain. ... Set the height of the drain to the top of the screed, remembering that you will need to create a fall to the drain. Ensure the wet room drain is level before tightening the adjustable legs.