Best answer

● Thumb Rule for Steel in percentage 5) Thumb Rule for Steel in slab is 1% – 1.5% of wet volume of concrete.

Answered by: Adam Dymitruk Date created: Jun 24, 2022

Why is my concrete green?

Asked By: Henrik Paul Date created: Jun 15, 2022

What Causes Greening? The blue-green color is attributed to a complex reaction of sulfide sulphur in slag cement with other compounds in portland cement. The degree and extent of the coloration depends on the rate of oxidation, the percentage of slag used, curing conditions and the porosity of the concrete surfaces.

Answered By: prosseek Date created: Jun 16, 2022

Is concrete stiffer than steel?

Asked By: Kelly Date created: Jun 15, 2022

The compressive strength of concrete is (potentially) much higher than steel. ... So that wall will be much stronger than a similar mass of steel. As for structural steel, an airplane, and your comparison: There are a lot of holes in steel structures.

Answered By: Aaron Maenpaa Date created: Jun 18, 2022

What is the R value of a concrete block wall?

Asked By: Rene Groeschke Date created: Jun 14, 2022

Tables of Building Material R-valuesMaterialThicknessR-value (F° · sq.ft. · hr/Btu)Concrete Masonry Unit (CMU)4"0.80Concrete Masonry Unit (CMU)8"1.11Concrete Masonry Unit (CMU)12"1.28Concrete 60 pounds per cubic foot1"0.5267 more rows•Nov 1, 2020

Answered By: iz_ Date created: Jun 14, 2022

Why is concrete a bad insulator?

Asked By: Alfred Huang Date created: Jun 18, 2022

Significance. Concrete has a low R-value. Concrete by itself has a very low R-value, a measure of thermal resistance. Its insulation value comes primarily from using it in thick slabs, and hence isolating the insulated space from thermal fluxes in the environment.

Answered By: Ben Packard Date created: Jun 18, 2022

Does concrete have an R value?

Asked By: Benjamin Hodgson Date created: Jun 23, 2022

A.: The R-value of an uninsulated, 8-inch-thick basement wall built using normal-weight concrete is 1.35, based on data from the 1993 American Society of Heating, Refrigeration, and Air-Conditioning Engineers' Handbook. By doubling the thickness of the wall to 16 inches, the R-value only increases by 0.50.

Answered By: Kaleb Brasee Date created: Jun 26, 2022

What is the U-value of a concrete wall?

Asked By: cbrr09 Date created: Jun 19, 2022

Common Heat Transfer Coefficients of some common Building ElementsBuilding ElementHeat-Transfer Coefficient U-value(W/(m2K))WindowsHorizontal single glass7.9Walls6 inches (150 mm) - poured concrete 80 lb/ft33.910 inches (250 mm) - brick2.019 more rows

Answered By: David Segonds Date created: Jun 22, 2022

Does concrete have a high R value?

Asked By: EboMike Date created: Jun 23, 2022

Concrete has a low R-value.

Concrete by itself has a very low R-value, a measure of thermal resistance.

Its insulation value comes primarily from using it in thick slabs, and hence isolating the insulated space from thermal fluxes in the environment..

Answered By: Hooked Date created: Jun 26, 2022

How can I strengthen my concrete slab?

Asked By: onmyway133 Date created: Jun 25, 2022

There are also some other techniques used for strengthening a reinforced concrete slab such as:Increasing the shear bearing capacity of the slab by adding steel plates strengthened by vertical screw bolts.Strengthening of the slab by post stressed reinforcement.Adding steel beams.More items....

Answered By: misha130 Date created: Jun 28, 2022

What is bond between concrete and steel?

Asked By: Rityanni Date created: Jun 21, 2022

Maintaining composite action requires transfer of load between the concrete and steel. This load transfer is referred to as bond and is ide- alized as a continuous stress field that develops in the vicinity of the steel-concrete inter- face.

Answered By: MD SHAYON Date created: Jun 24, 2022

What makes concrete brittle?

Asked By: Emile Cormier Date created: Jun 19, 2022

Corrosion of reinforcing steel and other embedded metals is the leading cause of deterioration in concrete. When steel corrodes, the resulting rust occupies a greater volume than the steel. This expan- sion creates tensile stresses in the concrete, which can eventually cause cracking, delamination, and spalling (Figs.

Answered By: Lance Pollard Date created: Jun 19, 2022

Related Question Answers

Vlad Mihalcea

Professor

Does concrete weigh more than steel?

Answer: Steel is heavier than concrete for the same volume, however steel buildings are generally lighter. ... In another words in steel buildings much less volume of material is needed for the same strength compared to concrete buildings.

Samuel Neff

Professor

What is the R value of an 8 inch concrete wall?

1.35A.: The R-value of an uninsulated, 8-inch-thick basement wall built using normal-weight concrete is 1.35, based on data from the 1993 American Society of Heating, Refrigeration, and Air-Conditioning Engineers' Handbook. By doubling the thickness of the wall to 16 inches, the R-value only increases by 0.50.

Simon Nickerson

Professor

How much value does a concrete driveway add?

At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate. Depending on the home, a new driveway can add around $5,000 to $7,000 in value. The amount can be more for a larger home.

Derek 朕會功夫

Professional

What is the insulation value of concrete block?

Tables of Building Material R-valuesMaterialThicknessR-value (F° · sq.ft. · hr/Btu)Concrete Masonry Unit (CMU)4"0.80Concrete Masonry Unit (CMU)8"1.11Concrete Masonry Unit (CMU)12"1.28Concrete 60 pounds per cubic foot1"0.5267 more rows•Nov 27, 2020

mayank1513

Professional

How much does a steel slab of concrete cost?

Ratio of Steel required to Cement ConcreteDifferent Parts of the BuildingRequirement of Steel TMT Bars in KgPlate Slabs95-135Bases90-130Floor Slabs80-120One way Slabs75-12513 more rows

Zach Smith

Professional

What is FS in concrete design?

fs. = stress in the steel reinforcement for. concrete design. = compressive stress in the. compression reinforcement for.

Aman

Professional

What is a good shoe for standing on concrete all day?

Top 15 Best Shoes for Walking / Standing on Concrete All Day Reviews in 2020Best Overall: Timberland PRO Men's Powertrain Industrial & Construction Shoe.Best Value: Skechers Men's Glides Calculous Slip-On Loafer.Best for Running On Concrete: Under Armour Men's Charged Assert 8 Running Shoe.More items...•

rsp

Professional

Why is reinforced concrete used in bridges?

Concrete with steel bars embedded in it is called reinforced concrete. Reinforcement allows for less concrete to be used because the steel carries all the tension; also, the concrete protects the steel from corrosion and fire. Where is the longest bridge?

Alex

User

Can we use concrete after 3 hours?

Concrete can last for 3 hours in ready mix truck. If it is not unloaded it on time the slump value of the concrete changes. Solidification of concrete takes long time so to the max only slump changes. However slump value is tested two times.

OscarRyz

User

How do you make a concrete slab stronger?

Reinforce a concrete pour with rebar or steel mesh. Rebar is the most common addition for strengthening the pour. In vertical or horizontal projects, the more rebar present in the concrete, the stronger the finished project will be.

Nam G VU

User

Can a concrete slab be moved?

Don't move a slab. A slab on grade, by design, has no structural reinforcing steel in it. ... Even if it does have reinforcing steel in it, it's placed at the midsection of the slab, providing zero structural strength. Concrete is cheap.

Samselvaprabu

User

Do you need steel in concrete slab?

Concrete that carries heavy loads (such as footings, foundation walls and columns) almost always requires reinforcing steel. Not all concrete work requires reinforcing though. Concrete projects such as pathways, some driveways and small shed or playhouse floors, generally do not require any steel reinforcing at all.

Lukasz Szozda

User

Do I need wire mesh for concrete patio?

For a concrete patio slab the best method of providing reinforcement is to use either wire mesh or steel bars (rebar) placed in a grid pattern. The use of rebar requires that each of the intersections of rebar be tied together with rebar tie wire. ... This must be done as soon as the concrete is poured.

dave

Guest

Is concrete stronger than steel?

The compressive strength of concrete is more than the steel, to handle tension forces steel bars are used in the concrete because of the weakness of concrete. The wall made of concrete alone is much stronger than the mass of steel.

D'Arcy Rail-Ip

Guest

Is wire mesh necessary in concrete driveway?

Using steel reinforcement will provide additional structural capacity for your driveway and is especially important if the slab will be exposed to heavy traffic. ... Use wire mesh for driveways that are 4 to 5 inches thick, and rebar for those that are 5 inches or more.

Stephen Quan

Guest

What type of concrete should I use for my driveway?

Concrete Characteristics To withstand the weight of vehicle traffic, choose a concrete with a strength of 4,000 pounds per square inch for your driveway. In areas with cold winters, concrete mix should have a 6 percent air-entrainment value.

Stephen Rauch

Guest

Do you need a footing for a concrete slab?

While not a requirement, a concrete slab foundation provides a solid, clean surface for your steel building and can help it last longer. Since the building will require anchoring to minimize shifting, pouring a concrete slab gives you a chance to pour footings as well.

Matt Johnson-Pint

Guest

Is concrete stronger than metal?

The compressive strength of concrete is (potentially) much higher than steel. So that wall will be much stronger than a similar mass of steel. As for structural steel, an airplane, and your comparison: There are a lot of holes in steel structures.

mario

Guest

Is concrete tougher than steel?

Steel Is Stronger Than Concrete The compressive strength of concrete is more than the steel, to handle tension forces steel bars are used in the concrete because of the weakness of concrete. The wall made of concrete alone is much stronger than the mass of steel.

YSC

Guest

What are concrete materials in maths?

Concrete materials, also known as manipulatives, are learning tools that children can pick up and manipulate. ... They're often used to help young learners carry out practical maths activities, for example, counters to help with addition, cubes and rods for place value.

Dawid Kruk

Guest

How much CO2 does concrete produce?

In 2018 the standardised mix value was 72.1 kg CO2/tonne for concrete. For concrete + reinforcement the CO2 emissions are 80.2 kg CO2/tonne - this is a reduction of 15% (from 94.7kg CO2/tonne) since the first year of reporting in 2009.

Shaun Luttin

Guest

What is a composite concrete slab?

Composite slabs comprise reinforced concrete cast on top of profiled steel decking, which acts as formwork during construction and external reinforcement at the final stage.

Konstantin Yovkov

Guest

What is the average value of creep coefficient of cement concrete?

Explanation: The creep coefficient varies from a minimum value of 1.5(for wet conditions) to a maximum value of 4.0(for dry condition), for design purposes it is convention to differentiate between deformation due to externally applied stress generally referred as creep and the deformation which occurs without

Anatolii

Guest

What is the best concrete degreaser?

Best Overall : Rust-Oleum Cleaner And Degreaser.Best For Mold & Mildew : ACT Concrete Cleaner.Best For Pressure Washers : Simple Green Driveway And Concrete Cleaner.Best Value : Terminator-HSD Concrete Cleaning For Oil Stains.Best Eco-Friendly : EXIMO Waterless Concrete Cleaner.Sep 27, 2020

DryLabRebel

Guest

What is the best concrete floor paint?

Best Color Selection: The Spruce Best Home by KILZ Interior Eggshell Paint & Primer in One. ... Best Overall: DryLok Bamboo Beige Latex Concrete Floor Paint. ... Best Value: INSL-X Sure Step Acrylic Anti-Slip Coating Paint. ... Best for Outdoors: Rust-Oleum EPOXYSHIELD Concrete Floor Paint.More items...

David Wolever

Guest

What is the R value of a 6 inch concrete wall?

As you can see, the R-value for a typical normal-weight 6-inch-thick concrete wall is about 0.5 in this reference. A wall of greater thickness would be more optimal in terms of insulating value if it were of lightweight or low density.

Aziza Kasenova

Guest

What is the strength of 1/6 cement mortar?

The value of compressive strength of mortar is satisfied the criteria of IS 2250-1981 i.e. minimum compressive strength for 1:3 and 1:6 mortar cube at age of 28 days is 7.5 MPa and 3 MPa respectively.

FaNo_FN

Guest

What is the U value of concrete blocks?

0.00 W/m2KFurthermore, solid wall options (traditional blocks laid flat or solid Airtec blocks) allow a u-value of 0.00 W/m2K to be applied.

Eric Wendelin

Guest

Do I need steel mesh in my concrete slab?

No, they do not. Larger projects or slabs may need steel reinforcement to provide support or extra strength. Wired mesh can also help resist cracking. However, not every piece of concrete necessarily requires that extra boost.

benzado

Guest

What percentage of concrete is silica?

10 percentMETHODS OF USING SILICA FUME IN CONCRETE As an admixture, small quantities of silica fume, 5 to 10 percent by weight of cement, can be added to concrete. The resulting loss in slump is compensated for either by the addition of more water or the use of superplasticizers.

Glorellia

Guest

What percentage of plaster walls have asbestos?

Plaster only has to be comprised of 1% asbestos to be considered an asbestos containing material (ACM) and therefore a health hazard. Older brands of cement may have asbestos fibers in the plaster mix.

Frank Nocke

Guest

Which cement contains higher percentage of C3S?

Which chemical compostion has highest content in OPC? Explanation: Lime forms nearly two-third (2/3) of the cement. Therefore sufficient quantity of the lime must be in the raw materials for the manufacturing of cement.

Pentium10

Guest

Which cement has maximum percentage of C3S?

The percentages of (C2S) and (C4AF) are relatively high and (C3S) and (C3A) are relatively low. A limitation on this type is that the maximum percentage of (C3A) is seven, and the maximum percentage of (C3S) is thirty-five. This causes the heat given off by the hydration reaction to develop at a slower rate.

DeanAttali

Guest

Do I need a concrete slab for a Tuff Shed?

Do I need a concrete slab for a Tuff Shed storage building? No, in most cases. While garages do require a concrete slab, our exclusive steel joist system has more than adequate strength and moisture resistant qualities to provide a solid foundation for your shed on most ground surfaces.

rbaldwin

Guest

Does a shed need a concrete slab?

No, in most cases. While garages do require a concrete slab, our exclusive steel joist system has more than adequate strength and moisture resistant qualities to provide a solid foundation for your shed on most ground surfaces. ... Concrete is required for garages and highly recommended for two story buildings.

Lundin

Guest

Does concrete driveway increase home value?

Paving a new driveway can add significant value to your property. You can definitely get a great return on your investment. At the very least your property value increase will cover the cost of the driveway. The amount of added value can fluctuate.

Roman Kuzmin

Guest

How are concrete balconies built?

There are two kinds of concrete balconies: continuous slab, which is simply an extension of a building's concrete floor slab and those that are constructed from steel frames that are mounted to the structure. Steel planks extend from the building's frame and are then filled with concrete.

Boghyon Hoffmann

Guest

What is the best concrete mix for a driveway?

To withstand the weight of vehicle traffic, choose a concrete with a strength of 4,000 pounds per square inch for your driveway. In areas with cold winters, concrete mix should have a 6 percent air-entrainment value.

M.Amin

Guest

Does concrete have limestone in it?

In addition to the value of limestone slabs quarried for building materials, limestone is also used in cement. ... Cement is simply one of the ingredients of concrete, which is also made of sand and bits of gravel or crushed stone.

peterevans

Guest

How do you insulate concrete slab edges?

Clean the exposed slab edge and apply damp proofing as a capillary break. Install non-moisture-sensitive rigid foam board insulation (such as extruded polystyrene [XPS] or mineral wool) along the edge of the slab of a slab-on-grade foundation to meet or exceed the insulation R-value required by code.

philnash

Guest

Do I need a concrete slab for a shed?

No, in most cases. While garages do require a concrete slab, our exclusive steel joist system has more than adequate strength and moisture resistant qualities to provide a solid foundation for your shed on most ground surfaces.

valdeci

Guest

Are concrete slab floors cold?

Yes, the room can be very cold because of the floor. Concrete slabs do not insulate well (R-value around 0.6!), and they lose most of their heat along the outside edge of the slab (the ground beneath the slab is a decent insulator). ... Two-inch, R-11 insulation drops the heat loss to only 1050 BTU/hour.

davnicwil

Guest

What is a concrete pillar?

Concrete pillars are crucial components in the design of structures such as parking garages and commercial buildings. Pillars are often reinforced with steel rods to provide extra tensile strength for both single and multi-storey structures.

Doug Stevenson

Guest

How do you reinforce an existing concrete slab?

There are also some other techniques used for strengthening a reinforced concrete slab such as:Increasing the shear bearing capacity of the slab by adding steel plates strengthened by vertical screw bolts.Strengthening of the slab by post stressed reinforcement.Adding steel beams.More items...

deceze

Guest

What is the R value of a concrete blanket?

Our Concrete Curing Blankets with the 6 mil Poly skins have an R-Value of 7.7. The skin is a woven reinforced poly with the topside Black and the underside Silver. Bubble and a reflective layer are use as insulation between the poly skins. Grommets are spaced approx.

vladimir

Guest

Does concrete increase home value?

Sell House Faster If you plan on staying in your home for many years to come, a concrete patio can still add value to your home.

mkobit

Guest

What is added to concrete to reinforce it?

Reinforced concrete, concrete in which steel is embedded in such a manner that the two materials act together in resisting forces. The reinforcing steel—rods, bars, or mesh—absorbs the tensile, shear, and sometimes the compressive stresses in a concrete structure.

Tuan Tran

Guest

What are the advantages of concrete over steel?

Concrete buildings offer many safety advantages over steel skeleton structures. Compared to steel, concrete can endure very high temperatures for long periods and offers excellent protection from explosions. Building with concrete is also very fast. When time means money this makes it a particularly attractive option.