Best answer

3ft. Wide StepsCodeDescriptionWeight361S1 Step90 lbs.361SWP1 Step with Platform450 lbs.362S2 Step375 lbs.362SWP2 Step with Platform975 lbs.4 more rows

Answered by: miradulo Date created: Jun 26, 2022

Is concrete safe for vegetable gardens?

Asked By: Jonathan Clark Date created: Jun 18, 2022

“So yes, modern day 'cinder' block might have fly ash in it.” ... There aren't any studies to show whether the heavy metals that may be contained in cinder blocks or concrete blocks can leach into the soil. If you are concerned, you could get your soil tested for heavy metals.

Answered By: Saptarshi Basu Date created: Jun 18, 2022

How do you build a concrete sleeper retaining wall on a slope?

Asked By: jonrsharpe Date created: Jun 08, 2022

Here are the steps on how to build a retaining wall on a slope.Laying out and planning. Layout the concrete stones at the site where the wall will be built. ... Digging the trench. Dig a 12 inch deep trench between the spray painted lines. ... Adding stone or pavers. ... Height of the retaining wall.

Answered By: Hamza usman ghani Date created: Jun 08, 2022

How do you hang something heavy on a plaster wall?

Asked By: Julien Hoarau Date created: Jun 12, 2022

Screws (and screws with masonry anchors for heavy items) are your best choice for hanging things on plaster walls without picture rail.

For lighter items, simply screwing into the plaster with a 1 1/4” drywall screw is usually enough to get the job done..

Answered By: Jack M. Date created: Jun 15, 2022

How long does concrete sealer last?

Asked By: abbot Date created: Jun 13, 2022

between 5-10 yearsEpoxy and urethane systems last between 5-10 years, closer to 5 if the surface experiences heavy traffic. Reactive penetrating sealers are the longest lasting concrete sealers, wearing away only if the substrate surface itself wears away.

Answered By: fl00r Date created: Jun 15, 2022

How many bags of cement do I need for 100 blocks?

Asked By: Beta Date created: Jun 19, 2022

three bagsIt takes three bags of mortar to lay 100 Block for Type N, Type S and Type M. How many Block can be laid with one bag of redi-mix mortar? You can lay ten block with one bag of redi-mix mortar. What size precast concrete steps do you carry?

Answered By: kshetline Date created: Jun 19, 2022

How much are concrete tanks?

Asked By: Jeroen Steenbeeke Date created: Jun 23, 2022

V. Water Tanks Price ComparisonSize in LitreStainless Steel (Round)Precast Concrete5,300$2,200$3,00010,500$3,600$4,00022,500$5,000$7,000Jun 10, 2020

Answered By: Andrew Grimm Date created: Jun 24, 2022

Can concrete steps be resurfaced?

Asked By: Antoine Dubuis Date created: Jun 14, 2022

To repair and resurface concrete steps: Use a chisel and wire brush to rough up the surface and remove any loose concrete. ... Once the material has set, apply a thin layer of concrete resurfacer to the top of the steps. Smooth the resurfacer, and add texture with a stiff brush to prevent slipping.

Answered By: QHarr Date created: Jun 17, 2022

How do you resurface precast concrete steps?

Asked By: Jeffrey Scofield Date created: Jun 23, 2022

Table of ContentsIntroduction.Step 1: Pressure Wash the Concrete.Step 2: Tape Off the Edges.Step 3: Prepare the Concrete Patch Mix.Step 4: Apply the Concrete Mix.Step 5: Fill the Holes.Step 6: Add a Second Coat.Step 7: Create a Wetter Consistency.More items...

Answered By: Akshay Hegde Date created: Jun 23, 2022

How long do precast concrete steps last?

Asked By: markdorison Date created: Jun 07, 2022

40 yearsYour precast step should last 20, 30 even 40 years if taken care of properly. Take a look through our photo gallery to see the finished product and see why a precast concrete step would be a great choice for your home.

Answered By: David R Date created: Jun 09, 2022

How much does it cost to install precast concrete steps?

Asked By: Anatolii Date created: Jun 23, 2022

Expect to pay between $500 and $1,500 to install your pre-purchased precast cement. The total precast cost of $800 to $3,500 compares favorably to the $900 to $5,000 range for a custom-poured staircase when including materials and labor.

Answered By: dimo414 Date created: Jun 23, 2022

Related Question Answers



Do concrete blocks leach chemicals?

Concrete blocks are also heavy to transport. Do cinder blocks leach chemicals? “So yes, modern day 'cinder' block might have fly ash in it.” There aren't any studies to show whether the heavy metals that may be contained in cinder blocks or concrete blocks can leach into the soil.



How much does a concrete sleeper weigh?

How heavy are the concrete sleepers? A plain concrete sleeper weighs approximately 75 kg for a 80mm thick and our pattern concrete sleeper weigh approximately 80kg. We also stock heavy duty sleepers for larger commercial retaining walls and can weigh up to 150kg each. 3.



Are precast concrete steps hollow?

Unlike poured concrete steps that require a footing, have to be formed, poured, shaped and cured, precast concrete steps are less likely to settle because they are hollow and lighter. means there are no mortar joints or gaps for water to seep into as could happen on real brick or natural stone steps.

Philippe Signoret


How much are precast concrete homes?

PRECAST PANEL PRICING The price of precast concrete panels can vary dependent on the nature and location of the build along with required panel sizing, thickness and finishes, however as a standard, panels can be priced between $150-300/sqm.

Bruno Lowagie


Is precast concrete stronger?

When considering precast vs cast in place concrete cost, the latter is often cheaper. It is also very strong since the developers can add reinforced to steel bars to increase its strength and durability.



Is precast concrete sustainable?

Precast concrete is truly a sustainable green product, is also highly durable and uses an extremely low water-cement ratio. All of these sustainable benefits result in precast concrete products being chosen as priority materials in LEED-certified buildings.



What is precast concrete floor?

Types of precast concrete floors Totally precast concrete floors are composed of units, which are totally cast at the plant. After erection, the units are connected to the structure & the longitudinal joints are grouted.In some cases a cast in-situ structural topping screed is added.

David Makogon


What is precast concrete made of?

Precast concrete is made up of coarse and fine aggregates, cement, water, and admixtures. It is mixed in the factory's batch plant according to the concrete mix design specified by the engineer.

Mike Thomsen


How is precast concrete connected?

Welded connections are the most common and typical connection used in the erection of precast concrete. ... The connections are usually made by placing a loose plate between two structural steel plates that are embedded both in the cast-in-place or the precast concrete panel and welded together.

René Vogt


What is precast concrete panel?

Precast concrete is a construction product produced by casting concrete in a reusable mold or "form" which is then cured in a controlled environment, transported to the construction site and lifted into place ("tilt up"). ... More recently expanded polystyrene is being used as the cores to precast wall panels.

Robert Crovella


Why is precast concrete used?

Precast concrete is widely used in low- and mid-rise apartment buildings, hotels, motels, and nursing homes. The concrete provides superior fire resistance and sound control for the individual units and reduces fire insurance rates. Precast concrete is also a popular material for constructing office buildings.



Are plaster walls waterproof?

It is water soluble and, without care, can succumb to moisture and humidity. Although interior plaster can never totally be waterproofed, there are some steps that you can take to create a stronger moisture barrier.



How do I remove adhesive from concrete floor?

Here are our recommended steps to take.Step 1: Scrape the concrete glue. Scrape off as much of the concrete glue as possible. ... Step 2: Apply boiling water. ... Step 3: Scrub the loosened glue. ... Step 4: Apply glue remover. ... Step 5: Sand the floor. ... Step 6: Troubleshoot.



How do you finish concrete after it dries?

These are the 4 steps in how to smooth concrete after it dries:Remove all imperfections on the surface.Vacuum up all debris and apply the adherent.Apply a new layer of concrete.Sand the surface and wash the concrete.Apply a layer of vitrifier to protect the concrete.



Do concrete coasters absorb water?

These heavy duty coasters are made from cement combined with non-toxic recycled ash to make them ultra water-absorbent and heavy enough to prevent them from sticking to your glass. ...



How do you raise a concrete slab yourself?

Without further ado, here are the steps to raise concrete with foam:Prep. Set up your tools and the area. ... Locate the dip. Mark with a level, chalk. ... Drill then vac. ... Cut back along the edge of the driveway – jack up the slab. ... Filler up! ... Fill the holes with concrete to conceal the injecting holes.



How much does a concrete water tank weigh?

Pre-cast concrete tanks can be delivered fully formed in sizes up to around 30,000 litres. They are extremely heavy – a 10,000 litre tank weighs around 7,000 kg.

Murli Prajapati


What type of concrete is used for steps?

Steps constructed from QUIKRETE® Concrete Mix or QUIKRETE® 5000 High Early Strength Concrete Mix are attractive and durable, and can provide good traction is wet weather. For homes, they are usually built 48" (14.6m) wide, or at least as wide as the door and walk they serve.



Can you lift concrete steps?

Concrete steps can often times be leveled instead of replaced. A-1 Concrete Leveling can lift and restore your uneven steps, using our patented concrete leveling and restoration process.



How do you clean cement steps?

Method 1 Using Dish Soap and Hot Water

  1. Sweep the steps. Use a broom to sweep away dirt and debris from the concrete steps.
  2. Mix one part hot water to two parts dish soap. Use liquid dish soap.
  3. Pour the solution over the stains.
  4. Scrub the stain with a stiff bristle brush.
  5. Rinse with hot water.

Jonathan Wakely


How much do concrete tanks cost?


Water Tanks Price ComparisonSize in LitreStainless Steel (Round)Precast Concrete5,300$2,200$3,00010,500$3,600$4,00022,500$5,000$7,000Jun 10, 2020.

Robert Hijmans


Is concrete water tank good?

Concrete water tanks and ferro-cement water tanks are generally strong and long-lasting. They are very heavy, and difficult to handle. Concrete water tanks are most often installed underground however smaller tanks are available for above ground. ...



Are concrete walls fire rated?

The minimum equivalent thicknesses of cast-in-place or precast concrete walls for fire-resistance ratings of 1 hour to 4 hours are shown in Table 722.2. ... For solid walls with flat vertical surfaces, the equivalent thickness is the same as the actual thickness.

Aaron Hall


Are cement pots durable?

Concrete pots and planters are extremely sturdy and are quite winter-resistant when compared to planters made with other materials. However, they are heavy and may contain undesirable compounds.



Does concrete leach into soil?

There aren't any studies to show whether the heavy metals that may be contained in cinder blocks or concrete blocks can leach into the soil.

If you are concerned, you could get your soil tested for heavy metals.


Fly ash is a byproduct of burning coal and so contains heavy metals and other hazardous waste..



How much does dry concrete weigh?

150 pounds per cubic footStandard reinforced concrete is 150 pounds per cubic foot when dry, but there are "light" versions that may be under 100 pounds per cubic foot, or as heavy as 300 pounds per cubic foot.

Hamid Yusifli


Is concrete more dense than water?

Note that all of the ingredients to concrete are pretty heavy. Cement is about three times as dense as water and aggregates are generally about twice as dense as water.



How much does it cost to redo concrete steps?

On average, concrete steps cost around $2,000. Most projects range between $900 and $5,000. Where your price falls depends on the number of steps and the size of the staircase you need. Pouring cement is about $300 per step at 2 feet wide and 11 inches deep, including materials and labor.

Adam Millerchip


How much does it cost to put in concrete steps?

Installing concrete steps costs $900 on average. Most jobs range between $500 and $4,000. Size is the most significant cost factor when determining concrete steps cost. A wide stoop or curved design will be more expensive than a small basic step.



What type of concrete is used for stairs?

Steps constructed from QUIKRETE® Concrete Mix or QUIKRETE® 5000 High Early Strength Concrete Mix are attractive and durable, and can provide good traction is wet weather.



How thin can I make a concrete countertop?

Glass Fiber Reinforced Concrete can go as thin as 3/4″ for the same kitchen countertop slabs that would need to be 1.5″ thick for precast.

This instantly cuts the weight in half..

Stephan Pieterse


How do you finish a small concrete pad?

Here are the steps for finishing a concrete slab:Spread the concrete. Use a square shovel or a come-along tool to push and pull the wet concrete into place.Screed the concrete. ... Float the surface. ... Edge the slab. ... Groove in joints. ... Trowel the surface.



How long does it take for quick setting concrete to cure?

QUIKRETE® Fast-Setting Concrete can be walked on in 2 hours. Wait at least 4 hours before placing heavy objects on the slab. GENERAL Curing is one of the most important steps in concrete construction. Proper curing increases the strength and durability of concrete.

Andy Brown


Are concrete walls cheaper than wood?

The study found that projects using concrete masonry units with precast concrete floor were the least expensive structural system over structural steel or wood frames as of May 2017. ... Its fire- and damage-resistant properties make concrete more cost-efficient overall.

Aristotle Pagaltzis


How do you carry concrete blocks?

Tips for Hauling Heavy Stones, Blocks, or SlabsGet Yourself a Dolly. One of the easiest ways to haul heavy objects is to use a dolly. ... Use Rollers or Skates. Many people get creative when moving and use a roller system with PVC or metal pipes to roll along the ground. ... Walk the Concrete Slab. ... Flip or Roll the Heavy Stone.



How much do concrete Lego blocks weigh?

Precast Concrete Lego Blocks are a cost efficient and versatile precast product that can be used for many applications, including retaining walls, anchorage, equipment barriers, entrance blocks and many more. The dimensions are 60” x 30” x30” and weigh 4,500lbs.



How much do precast concrete blocks cost?

How much do precast concrete panels cost? Precast panel costs depend on the manufacturer, but you can expect to spend at least $20 per square foot for a 200-square foot panel. Due to economies of scale, a 100-square foot panel is often more expensive at $30 per square foot.

Martin Löper


What is the ideal location for setting up a cement factory?

1 Answer. Cement industry requires bulky and heavy raw materials like limestone, silica, alumina and gypsum. Heavy costs are involved in the haulage of the raw materials. Hence, economically, the ideal location for cement factories are near the sources of raw materials.



Are concrete walls cheaper?

Precast Concrete Walls Cost Because it's an estimated 23% less expensive than poured concrete, installing a precast concrete wall costs $4,820 on average. While precast materials span from $20 to $30 per square foot, it's a lot less labor intensive than the traditional pouring method..

Mike Brind


Are precast concrete walls safe?

The most significant hazards during work with precast concrete elements are uncontrolled collapse of the elements and being crushed between a precast concrete element and another object. These hazards may cause serious injuries or death.



Can you resurface concrete stairs?

Repairing concrete steps and resurfacing concrete steps can be a cost-effective way to make your home safer without hiring a concrete contractor. Just follow the instructions on how to fix concrete steps outlined here.



Do concrete steps need rebar?

As mentioned above, concrete steps must have rebar installed to reinforce the structure. As you can see here, these steps are reinforced with a lattice of rebar that also ties into the concrete sidewalk at the top of the steps, helping to hold all of it together.

Gary Archer


Can you put concrete in a dumpster?

Heavy debris, such as: concrete, asphalt, dirt, and brick, can be thrown in most dumpsters, however due to its weight, Express Roll-Off only allows 15 Yard dumpsters (filled 3/4 high) for these heavy materials. Asphalt roofing shingles are another category of heavy debris that can go in a dumpster.

Jitendra Vyas


How do I remove concrete from my lawn?

Steps for Removing a Concrete SlabStep 1: Create a Void Under the Concrete. The best way to speed up concrete removal is to create a void underneath the section of slab you're working on. ... Step 2: It's Hammer Time. ... Step 3: Pull Apart and Remove the Broken Concrete. ... Step 4: Repeat Steps Until Concrete Is Demolished.Jan 16, 2019



Does precast concrete has rebar?

Precast Concrete Manufacturing Precast concrete is poured into a wooden or steel mold with wire mesh or rebar.

This mold may also have prestressed cable, if needed.

It is cured in a controlled environment — usually at a plant..