Best answer

For a 10 x 10 slab, we'd suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

Answered by: Bharel Date created: Jun 23, 2022

How many bags of cement do I need for a 10x10 slab?

Asked By: senderle Date created: Jun 13, 2022

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that's an extra 8 60-pound bags or 6 80-pound bags.

Answered By: Felix Kling Date created: Jun 15, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: zcoop98 Date created: Jun 24, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: rmtmckenzie Date created: Jun 27, 2022

How do I calculate how much concrete I need for a slab?

Asked By: Saeed Heidarizarei Date created: Jun 08, 2022

CONCRETE CALCULATOR FORMULADetermine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•

Answered By: Arvind Kumar Avinash Date created: Jun 11, 2022

How many bags of concrete do I need for a 4x8 slab?

Asked By: Hitmands Date created: Jun 07, 2022

Your project is 32 square feet at a depth of 4”. Here is the quantity that you will need for your slab. Quikrete Concrete Mix: 24- 60lb bags.

Answered By: geoand Date created: Jun 08, 2022

How much concrete do I need for a 12x20 slab?

Asked By: Daniel Beck Date created: Jun 15, 2022

Concrete Extras With a brief look, a 12x20 area at 6 inches deep, you would need approximately 6.31 tons or 4.44 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Answered By: Ismail Badawi Date created: Jun 15, 2022

How much concrete is needed for a 10x10 room?

Asked By: Dupocas Date created: Jun 20, 2022

14.19 cuft of cement 2. 28.38 cuft of fine aggregate.

Answered By: adam0101 Date created: Jun 21, 2022

How much sand and cement do I need for brickwork?

Asked By: John Date created: Jun 12, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: Alan Haggai Alavi Date created: Jun 13, 2022

How many bags of concrete do I need for a 4x4 pad?

Asked By: Yuchen Date created: Jun 24, 2022

The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab.

Answered By: Dean J Date created: Jun 27, 2022

How much cement do I need for a brick wall?

Asked By: fuz Date created: Jun 13, 2022

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Answered By: hjpotter92 Date created: Jun 13, 2022

How much sand and cement do I need for 100 blocks?

Asked By: dhilt Date created: Jun 13, 2022

You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Answered By: Daryl Spitzer Date created: Jun 16, 2022

Related Question Answers

QoP

Professor

How many yards of concrete do I need for a 16x16 slab?

With a brief look, a 16x16 area at 6 inches deep, you would need approximately 6.73 tons or 4.74 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Hossein Azizdokht

Professional

How much does it cost for a 12x12 concrete slab?

To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944. Get free estimates from concrete companies near you.

jdi

Professional

Do I need rebar for small concrete slab?

You do not need rebar for any slab if you make it thick enough and space the joints properly. Rebar in jointed pavement is there to counter the cupping effect of thermal expansion. I always recommend the use of rebar or at least rewire. Any concrete slab can crack.

kHarshit

Professional

How much cement do I need for a 20x20 slab?

With a brief look, a 20x20 area at 6 inches deep, you would need approximately 10.52 tons or 7.41 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

guillaume blaquiere

Professional

Can I extend a concrete slab?

Making sure that the foundation for the extension is well compacted and onto good material. Cut back and scable the joint with the existing 10x10 slab so that there is a good bond when the new concrete is cast. Drill and fix dowel bars into the existing slab across the joint with the extension.

nalply

User

Can I pour a 3 inch concrete slab?

A 3” to 4” slab will work for the floor of a storage or tool shed, workshop, garden shed, or playhouse. Contact your local building authority. Check whether you'll need a permit for your project. You should also find out the setbacks so you'll know how much distance to leave between the lot line and your construction.

Dan Levy

User

How much cement is needed for a 10x10 slab?

All concrete consists of three simple ingredients: cement, aggregates like sand or gravel, and water. It's the proportions of each that determine the strength of the project. For a 10 x 10 slab, we'd suggest a mix with a capacity of about 4,000 pounds per square inch, or psi.

Chris K

User

How much does a 10x10 concrete slab weigh?

A 10' x 10' pad of concrete 4 inches thick is a little over 1 cubic yard weighs approximately 4,400 pounds. If you want to calculate the weight of concrete by cubic foot, just divide the cubic yard weight by 27. Coincidentally, the weight of one cubic foot of concrete weighs about 150 pounds.

Rohan Singh

User

How much concrete do I need for a 24x24 garage?

Average Cost To Pour Concrete To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944.

Antarr Byrd

Guest

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

Asad Malik

Guest

How much concrete should I get around my pool?

Table and chairs for up to eight requires a minimum 12' x 12' concrete slab. Small end tables and chairs do vary on size of the table. For concrete purposes we generally recommend 5' x 5' concrete slab. Tanning lounger/ Chaise loungers need a minimum of 8' of concrete off of the swimming pool.

cronoik

Guest

How much should a 10x10 concrete slab cost?

Average Cost To Pour Concrete To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944.

Mostafa

Guest

How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

GregL

Guest

How much insulation do I need under a concrete floor?

A 50mm thick layer of proprietary floor slab insulation is usually enough to reach and maintain the target U value but this should be checked with an architect first. Insulation sheets should be laid tightly together with the joints staggered to avoid movement.

Richard Hpa

Guest

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

ConcernedOfTunbridgeWells

Guest

How much would a 12x10 concrete slab cost?

Average Cost To Pour Concrete To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944..

samabcde

Guest

How much plaster do I need for a room?

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

hmjd

Guest

How much cement do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

rakib_

Guest

How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Jeff Meatball Yang

Guest

How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

disinfor

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Dominique

Guest

How many bags of concrete do I need for a 12x12 slab?

Enter the size of the slab you want to build in square feet. The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab. (All yields are approximate and do not include allowance for uneven subgrade, waste, etc.)

Jalasem

Guest

How much concrete do I need for fence posts?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Phil

Guest

How much concrete do I need Home Depot?

Each 80-pound bag of QUIKRETE(r) Concrete Mix will yield approximately 0.6 cubic feet of concrete. For a 10' by 10' slab at 4" thick, you will need 33-1/3 cubic feet of concrete, or 56 80-pound bags. Yields are approximate and will vary with waste, uneven subgrade, etc.

Matthew Scharley

Guest

How many bags of cement do I need for 10x10?

Using a Concrete Calculator You'll also get the number of 40-pound, 60-pound, or 80-pound bags of concrete are needed for the project. For example, a 10′ x 10′ slab that is 4″ thick will need an estimated 1.23 yards3 or 75 60lb bags of concrete and will cost roughly $140.

Alumno Cabreado

Guest

How many bags of concrete do I need for a 10x12 slab?

The volume of concrete required for a 10- by 10-foot slab depends on the diameter of the slab. For a 4-inch slab, either eight 60-pound or six 80-pound bags are required, while for a 6-inch slab, either 12 60-pound or nine 80-pound bags are necessary.

jakub.g

Guest

How much concrete do I need for a 40x60 slab?

The use determines the thickness. So if you take the surface area and multiply it by the thickness you will get the volume. Ie. 40 feet × 60 feet × 1 foot thick would be 2400 cubic feet of concrete divide by 27 to get cubic yards 2400÷27= 88.889.

dbenham

Guest

How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly $6 to $11 per 100 square feet, considering you'll need $2 to $3 for pre-mixed joint compound, $0.10 to $0.50 for latex colorant, and $4 to $7 for tinted glaze.

Ashok Kuvaraja

Guest

How do I figure out how much concrete I need for a round hole?

They are 4 feet in height and 10 inches in width (diameter), or 4′ x 10″.Choose Round Column (or Round Slab) on the calculator.Enter Height 4 ft (or 48 in)Enter Diameter 10 in.Calculate and the answer is 0.08 cubic yards for one concrete tube.Multiply 0.08 x 50 = 4 total cubic yards of concrete for 50 tubes.More items...

oxbow_lakes

Guest

Do I need gravel under concrete slab?

You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.

frosty

Guest

Do I need a concrete slab for a Tuff Shed?

Do I need a concrete slab for a Tuff Shed storage building? No, in most cases. While garages do require a concrete slab, our exclusive steel joist system has more than adequate strength and moisture resistant qualities to provide a solid foundation for your shed on most ground surfaces.

CyberEternal

Guest

Do I need a permit to pour a concrete slab in Florida?

Yes, you will be required to pull a permit when removing a tree, including dead trees. Do I need to obtain a permit to pour a concrete slab, patio, or driveway? Yes, a site plan will be required with a description of what is being done.