Best answer

22.222 cu. yds. How many concrete bags would I need for a 30 ft x 40 ft x 6" slab?

Answered by: T.J. Crowder Date created: Jun 25, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: Davis Herring Date created: Jun 20, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: Mooing Duck Date created: Jun 21, 2022

How much concrete do I need for a 12x20 slab?

Asked By: floatingLomas Date created: Jun 14, 2022

Concrete Extras With a brief look, a 12x20 area at 6 inches deep, you would need approximately 6.31 tons or 4.44 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Answered By: gontard Date created: Jun 16, 2022

How do I get rid of rats under my concrete slab?

Asked By: Damjan Pavlica Date created: Jun 21, 2022

Answer: If the patio slab is not connected to the house slab you can use a Giant Destroyer to help eliminate the rat. If there are many tunnels or if it is in an area where you cannot seal up the entrances you may want to consider using rat poison baits instead such as Fastrac or Contrac.

Answered By: Georgy Kopshteyn Date created: Jun 22, 2022

How many 60 pound bags of concrete make a yard?

Asked By: Joe Date created: Jun 16, 2022

60 pound bag yields .017 cubic yards..

Answered By: Fabrizio Valencia Date created: Jun 16, 2022

How many concrete blocks are in a square meter?

Asked By: daniel Date created: Jun 09, 2022

10 concrete blocksThere are 10 concrete blocks in a square meter and 120 bricks in a square meter.

Answered By: Martin Schneider Date created: Jun 12, 2022

How many concrete blocks do I need calculator?

Asked By: ulou Date created: Jun 12, 2022

Measure the length, width, and height of the void in inches, then multiply to get the cubic inches of the void. Multiply the cubic inches by the number of voids in the wall, typically 2 per block. Finally, divide cubic inches by 46,656 to find cubic yards of concrete needed.

Answered By: i_am_jorf Date created: Jun 12, 2022

How many bags of cement do I need calculator?

Asked By: Slipstream Date created: Jun 14, 2022

For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards.

Answered By: phuclv Date created: Jun 16, 2022

How many bags of concrete do I need for a 10x20 slab?

Asked By: pRaNaY Date created: Jun 17, 2022

A 60-pound bag yields . 017 cubic yards, and an 80-pound bag yields . 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

Answered By: staticVoidMan Date created: Jun 17, 2022

How many concrete roof tiles are in a square?

Asked By: Forrest Date created: Jun 13, 2022

Typically, 6-8 boosted tiles per roofing square are installed.

Answered By: John Date created: Jun 15, 2022

How much does it cost for a 30x40 concrete slab?

Asked By: ufk Date created: Jun 12, 2022

Concrete Slab Cost CalculatorSize (in feet)Approximate Cost20x40$4,80030x30$5,40030x40$7,20030x50$9,00010 more rows

Answered By: Niamona Date created: Jun 15, 2022

Related Question Answers

isherwood

Professor

How much would a 30x40 concrete slab cost?

30x40 Garage Concrete Slab CostCONCRETECOST PER SQ FT*TOTAL COST*CONCRETE Standard 4" Concrete SlabCOST PER SQ FT* $6 - $7TOTAL COST* $7,200 - $8,400CONCRETE 6" Concrete SlabCOST PER SQ FT* $7 - $8TOTAL COST* $8,400 - $9,6001 more row•Jan 27, 2021

bbsimonbb

Professor

How many square feet will 10 yards of concrete cover?

According to the table above, one cubic yard of concrete placed at a thickness of 5-inches covers 65 square feet. In a perfect universe, our 1,080 square foot driveway will need exactly 16.62 cubic yards of concrete (1,080 square feet / 65 square feet equals 16.62 cubic yards).

Frank van Puffelen

Professor

How many yards of concrete do I need for a 16x16 slab?

With a brief look, a 16x16 area at 6 inches deep, you would need approximately 6.73 tons or 4.74 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Josef

Professional

How much cement do I need for a 20x20 slab?

With a brief look, a 20x20 area at 6 inches deep, you would need approximately 10.52 tons or 7.41 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Barry

Professional

How many yards of concrete do I need calculator?

Multiply the width times the length times the height (W x L x H). You can also use our volume calculator to find cubic yardage of a space. Convert the volume to cubic yards from cubic feet. To do so, divide the cubic footage by 27 to get the yards of concrete needed.

Slava Vedenin

Professional

How much concrete can a mixer hold?

Trucks weigh 20,000 to 30,000 pounds (9,070 to 13,600 kg), and can carry roughly 40,000 pounds (18,100 kg) of concrete although many varying sizes of mixer truck are currently in use. The most common truck capacity is 8 cubic yards (6.1 m3).

AlphaHowl

Professional

How thick should a concrete slab be for a basketball court?

3500 PSIBase Material Many basketball courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance.

Shiva Krishna Bavandla

User

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

jared_mamrot

User

How many concrete roof tiles are in a pallet?

900 Tiles900 Tiles Per Pallet....How many Marley plain tiles are in a pallet?Tile RangeTile SizeTiles per PalletConcrete Plain Roof Tiles266 x 165mm768Clay Rosemary Craftsman Tiles265 x 165mm720Jan 17, 2020

Daniel Jachetta

User

How many bag of cement do I need?

For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield.

LondonRob

Guest

How much does 20 yards of concrete weigh?

Concrete Weight per Cubic Yard A solid slab of concrete weighs 4,050 pounds per cubic yard. A cubic yard of broken up concrete weighs 2,025 pounds.

samabcde

Guest

How many bags of concrete make a meter?

One cubic meter of concrete is equal to 1.308 cubic yards of concrete. If there are 5 1/2 bags of cement in 1 cubic yard of concrete, there would be 7.2 bags in 1 cubic meter of concrete. These are the 94 pound bags of portland cement or 42.64 kg bags of cement.

Richard

Guest

How many concrete cubes are in a truck?

How much is a truck load of concrete? Each cubic yard costs about $65. However, a fullyloaded cement truck will hold 10 cubic yards—andpartial “short” loads cost $15 to $20 extra forevery cubic yard less than a full load.

Litar

Guest

How much concrete can one person pour in a day?

It all depends on how and where you are pouring the concrete and how you are finishing it. When we were placing concrete for a parking lot we poured 1000 cubic yards a day or about 10 cubic yards in 5 min. When we were placing concrete for a bridge deck 200 cubic yards took all day or about 10 cubic in 25 min.

Jay

Guest

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

Lee Richardson

Guest

How many yards of concrete can you pour in a day?

It all depends on how and where you are pouring the concrete and how you are finishing it. When we were placing concrete for a parking lot we poured 1000 cubic yards a day or about 10 cubic yards in 5 min. When we were placing concrete for a bridge deck 200 cubic yards took all day or about 10 cubic in 25 min.

Mark Rushakoff

Guest

How many yards of concrete do I need for a 40x60 slab?

The use determines the thickness. So if you take the surface area and multiply it by the thickness you will get the volume. Ie. 40 feet × 60 feet × 1 foot thick would be 2400 cubic feet of concrete divide by 27 to get cubic yards 2400÷27= 88.889.

bevacqua

Guest

How much concrete does a concrete truck carry?

Trucks weigh 20,000 to 30,000 pounds (9,070 to 13,600 kg), and can carry roughly 40,000 pounds (18,100 kg) of concrete although many varying sizes of mixer truck are currently in use. The most common truck capacity is 8 cubic yards (6.1 m3).

harryg

Guest

How much does a concrete carport cost?

The cost of a concrete slab averages between $4 and $8 per square foot. Expect to pay at least $1,500 for a 12x20 foot, one-car carport. Many carports are built on a concrete slab, which includes piers.

Diego Torres Milano

Guest

Can you buy concrete mix in bulk?

We offer concrete supplied in bulk bags or super sacks. ... Just let us know the mix design and how many cubic yards you need for your project and we will take it from there.

ChssPly76

Guest

How do you calculate the number of bags of cement is needed?

For concrete, the formula for volume is as follows: length x width x thickness. To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards.

Yuchen

Guest

How many bags of cement mix do I need?

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards.

deceze

Guest

How many bags of concrete do I need for a 12x12 slab?

Enter the size of the slab you want to build in square feet. The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab. (All yields are approximate and do not include allowance for uneven subgrade, waste, etc.)

NPE

Guest

How many bags of cement do I need?

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards.

Wayne

Guest

How many bags of cement make a cube?

A. One cubic meter of concrete is equal to 1.308 cubic yards of concrete. If there are 5 1/2 bags of cement in 1 cubic yard of concrete, there would be 7.2 bags in 1 cubic meter of concrete. These are the 94 pound bags of portland cement or 42.64 kg bags of cement.

pythonic833

Guest

How many bags of concrete do I need for a 10x10 slab 4 inches thick?

The volume of concrete required for a 10- by 10-foot slab depends on the diameter of the slab.

For a 4-inch slab, either eight 60-pound or six 80-pound bags are required, while for a 6-inch slab, either 12 60-pound or nine 80-pound bags are necessary..

M.Amin

Guest

How many bags of concrete do I need for a 10x12 slab?

The volume of concrete required for a 10- by 10-foot slab depends on the diameter of the slab. For a 4-inch slab, either eight 60-pound or six 80-pound bags are required, while for a 6-inch slab, either 12 60-pound or nine 80-pound bags are necessary.

Brian R. Bondy

Guest

How much cement mix do I need?

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield. Use the following yields per each bag size: 40 pound bag yields .011 cubic yards. 60 pound bag yields .017 cubic yards.

Carl Norum

Guest

How do I figure out how much concrete I need for a round hole?

They are 4 feet in height and 10 inches in width (diameter), or 4′ x 10″.Choose Round Column (or Round Slab) on the calculator.Enter Height 4 ft (or 48 in)Enter Diameter 10 in.Calculate and the answer is 0.08 cubic yards for one concrete tube.Multiply 0.08 x 50 = 4 total cubic yards of concrete for 50 tubes.More items...

Joshua Fox

Guest

How do I calculate concrete units?

Multiply the width, length and depth of your area. Concrete is usually ordered in cubic metres. Here's a conversion guide. There are 1.3 cubic yards in one cubic metre (If you have your requirement in cubic yards, all you need to do is divide by 1.3 to get the cubic metres answer).

Kapcash

Guest

How many 60 pound bags of concrete are on a pallet?

Or 50 40 lb bags . Usually sold 1 ton per pallet . how many bags of cement are in a pallet? Portland Cement, Type I/II, Quikrete, 94lb Bag, 35 Bags per Pallet, Price per 70 Bags (2 Pallets) In Stock!...How many 80 pound bags of quikrete are in a pallet?UNIT SIZEUNIT WEIGHTPACK QUANITY60 lb. bag60 lb.5640 lb. bag40 lb.631 more row•Feb 24, 2020

Zim

Guest

How many bags concrete do I need calculator?

For concrete, the formula for volume is as follows: length x width x thickness.

To determine how many bags of concrete you will need, divide the total cubic yards needed by the yield.

Use the following yields per each bag size: 40 pound bag yields .011 cubic yards..