Best answer

Each hole for the terminal posts must be 8 inches in diameter and 30 inches deep, requiring 0.85 cubic feet of concrete to fill.

Answered by: brismuth Date created: Jun 23, 2022

How many bags of concrete do I need for a post hole?

Asked By: Mark Harrison Date created: Jun 19, 2022

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 - 48 hours.

Answered By: Hans Olsson Date created: Jun 19, 2022

Do I need to cement fence posts?

Asked By: Alex Poole Date created: Jun 14, 2022

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

Answered By: IBAction Date created: Jun 17, 2022

How many bags of concrete do I need for a 6x6 post?

Asked By: Qwerty Date created: Jun 22, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: nem035 Date created: Jun 25, 2022

How much concrete do I need for a deck post?

Asked By: Thom Date created: Jun 19, 2022

One 80-lb bag of concrete yields . 60 cubic feet when combined with 4 quarts of water. If you're purchasing 80-lb bags of concrete, you'll need 1.66 bags of concrete. As before, since bags of concrete are only sold in whole quantities, you'll need to purchase two (2) 60-lb.

Answered By: Aaronaught Date created: Jun 22, 2022

Do you put concrete inside vinyl fence post?

Asked By: tokland Date created: Jun 10, 2022

Concrete is the foundation of the fence. Using concrete in the foundation point will allow consistency for all of the vinyl fence posts. The ground is always settling and moving. Having concrete as the foundation of your vinyl fence posts creates a firm base that won't move and minimizes the posts moving.

Answered By: It_is_Chris Date created: Jun 10, 2022

How deep should a concrete fence post be in the ground?

Asked By: Jkarttunen Date created: Jun 23, 2022

Concrete fence posts must be fixed into the ground in the traditional way: by digging a hole. When concreting fence posts into the ground, the posts should be buried a minimum of 600mm deep. The recommended depth for a 1.80m or 6 foot high fence is 760mm or 2' 6".

Answered By: Philipp Date created: Jun 23, 2022

How much concrete do I need for a 4x4 fence post?

Asked By: AlphaHowl Date created: Jun 15, 2022

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Answered By: patapouf_ai Date created: Jun 16, 2022

How many bags of concrete do I need for a 3 foot post hole?

Asked By: Rabbid76 Date created: Jun 21, 2022

I normally use post hole diggers (6" diameter?) 3 feet deep and ½ a bag of redi-mix per post.

Answered By: strager Date created: Jun 24, 2022

How many bags of concrete do I need for a 6x6 post hole?

Asked By: Nicholas Carey Date created: Jun 12, 2022

As I recall, a 60# bag of concrete is about .

5cf, so you'd need 3 bags per hole..

Answered By: Andy Arismendi Date created: Jun 15, 2022

How many bags of concrete do I need for a 8x8 slab?

Asked By: diEcho Date created: Jun 14, 2022

How many concrete bags would I need for a 8 ft x 8 ft x 6" slab? 54 x 80lb Concrete bags. How much does it cost to pour a 8'x8' x6" slab? Ready-mix costs approx $277.86.

Answered By: aioobe Date created: Jun 14, 2022

Related Question Answers

shree.pat18

Professor

How do you calculate concrete for a fence?

You need to find out how much fencing you need in linear foot or linear meter and multiply that amount with the fence height pricing you want. For example, if you require 150 linear foot worth of 6 feet high concrete fence. Your material estimate will be 150 x $40 = $6000.

EricSchaefer

Professor

How much concrete do I need to set a deck post?

One 60-lb bag of concrete gives you . 45 cubic feet of concrete when mixed with 2.5 quarts of water. In order to have enough concrete for 1 cubic yard (27 cubic feet), you'll require 2.2 bags of 60-lb concrete.

Pressie

Professor

How many bags of concrete do I need per fence post?

two bagsOur example post will require two bags for every post if you're using fast-setting concrete. Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow.

dww

Professor

How long should concrete cure for fence posts?

Give it time when dry setting the fence posts Like a good wine, a dry setting concrete will take time to set fully. A quick setting product may not be the best one, and the standard setting time is around four hours. Make sure the post is plumb at all times during the process.

whites11

Professional

Do I need concrete for mailbox post?

No concrete needed. Bury an empty 6 or 8 inch tube two feet deep, and flush with the ground. Compact the soil around it. Then center and level your mailbox within the tube, and fill around the post with sand.

Paul Kulchenko

Professional

How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Rohan Singh

Professional

How much concrete is needed for a fence post?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing.

Your post diameter and height determine how big each hole needs to be.

As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post..

CBroe

Professional

How deep do concrete fence posts need to be?

600mmConcrete fence posts must be fixed into the ground in the traditional way: by digging a hole. When concreting fence posts into the ground, the posts should be buried a minimum of 600mm deep. The recommended depth for a 1.80m or 6 foot high fence is 760mm or 2' 6".

Dr. Jan-Philip Gehrcke

User

How do you cement a vinyl fence post?

Not All Cement Is Created Equal – Don't Pour Until You Are SureDig and prepare the holes in advance.Line the bottom with pea gravel.Set the post straight in the hole.Pour the dry setting cement.Give it time when dry setting fence posts.

Thomas Orozco

User

Do you have to use concrete for mailbox post?

Make sure your desired mailbox post meets Federal Highway administration recommendations: a stable post that can bend or fall to the side if hit by a car. Avoid unyielding supports such as metal or concrete posts, and instead use a 4 x 4-inch wooden support or a 2-inch diameter standard steel or aluminum pipe.

quest49

User

How much concrete do I need for 6x6 post?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground. The diameter of your post hole should be three times the diameter of your post.

Sam Saffron

Guest

How much concrete do I need for a steel fence post?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place.

The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.

Depth of the hole is one-third to half the above ground height of the fence post..

JenB

Guest

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

Levi Fuller

Guest

How much concrete do I need for post holes?

Calculate Concrete Volume With the volume of the submerged post and the volume of the hole figured out, subtract the post volume from the hole volume, and you will have the volume of concrete needed for each hole.

Simply multiply that amount times the number of posts to get a total quantity..

bdonlan

Guest

How much concrete do I need to set a post?

Remember, the depth of the post hole should be one-half of the above-ground post height.

(Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

The calculator will indicate the number of 50 lb.

bags of QUIKRETE® Fast-Setting Concrete you need..

Chinmay Kanchi

Guest

How much concrete is in a post hole?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground.

rraphael

Guest

How thick of concrete do you need for a 2-post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience.

Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed..

user6123723

Guest

How many bags of concrete do I need for a fence post hole?

1 - 4 bagsMost fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

pptaszni

Guest

How much cement do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Jonathan Wood

Guest

How deep should a concrete fence post be?

600mmConcrete fence posts must be fixed into the ground in the traditional way: by digging a hole.

When concreting fence posts into the ground, the posts should be buried a minimum of 600mm deep.

The recommended depth for a 1.80m or 6 foot high fence is 760mm or 2' 6"..

Benjamin Crouzier

Guest

How long does concrete fence post last?

25-yearConcrete fence posts require no after-sale treatment and require minimal upkeep for the duration of their 25-year lifespan. The main challenge is to ensure water does not get into the post's foundations, as this freeze and expand, loosening the fence post.

Rick supports Monica

Guest

How many bags of concrete do I need for a chain link fence post?

A 40-pound bag of concrete mix makes 0.3 cubic feet, 60-pound bags make 0.45 cubic feet and 80-pound bags make 0.6 cubic feet. For the example given, 56 of the 40-pound bags, 37 of the 60-pound bags or 28 of the 80-pound bags will be needed for the fence installation.

simbabque

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

David M

Guest

How much concrete is in a fence hole?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Jan Nielsen

Guest

What kind of concrete should I use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.

bishop

Guest

How much concrete do I need for fence posts?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

ydaetskcoR

Guest

Can you mix concrete in post hole?

Instead of filling in the top of the hole with soil that could hold moisture at the base of your fence post, add a little more concrete to divert rainwater away from the post and protect it from rot at ground level. You'll need just a bucket or wheelbarrow to mix the concrete and a trowel to smooth it in place.

Sergei Panfilov

Guest

How do I keep my fence post straight when concrete is set?

Setting the Post You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

Kevin Burke

Guest

How do you repair a fence post with concrete Spurs?

How to Fix a Wobbly Fence with a Concrete Repair SpurDig a hole for the spur. First you need to make some space for your new spur. ... Make adjustments. ... Measure twice, drill once. ... Secure your spur! ... Marvel in your solid fence.Feb 9, 2018

Macmade

Guest

How do you repair wooden gravel boards to concrete posts?

The quickest and easiest way of fixing gravel boards to timber fence posts is to use timber “cleats”. These are small pieces of pressure treated batten that are screwed to the fence post and the gravel board is then screwed to the cleat.

Klas Mellbourn

Guest

How do you replace a concrete fence post?

Dig a hole around 1 side of the fence post. With a shovel, break into the ground surrounding the fence post's concrete base. Keep digging until you create a half-circle gap between the ground and concrete. If possible, dig a hole that is as deep as the concrete itself, giving the post as much wiggle room as possible.

tybro0103

Guest

How do you stop fence panels moving in concrete posts?

Fitting these fencing clips is easy – simply press them flat and slide them into the gap. They will expand again to take up the gap between the fence panel and concrete post. As I found, larger panels really do need six clips each, to prevent the panel from being buffeted and the spring clips working themselves out.

Sibi

Guest

How do you straighten a concrete fence post without removing it?

The Fix-A-Fence SolutionStep 1 – Prepare the Site. ... Step 2 – Prepare the Fix-a-Fence Kit. ... Step 3 – Position the Bracket in the Hole. ... Step 4 – Mix a 60lb Bag of Concrete. ... Step 5 – Fill the Hole with Concrete. ... Step 6 – Take a Break While the Concrete Cures. ... Step 7 – Reposition the Fence Post and Attach the Bracket.

Dave Syer

Guest

How long do concrete fence post last?

around 20 yearsConcrete is a durable building material and can last for around 20 years with minimal maintenance. Sounds promising doesn't it? Surprisingly, concrete isn't immune to wear and tear. Excessive wind and rain can cause concrete posts to chip and crack.

apsillers

Guest

How long do concrete posts take to set?

How long does concrete take to set in a post hole? We would advise waiting at least four hours before any weight or pressure is applied to the posts or fence holes. For best results, you should wait at least 24 hours before you continue hole and fence construction.

Senior Web Engineer

Guest

What is the best concrete to use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow.

Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4..

Keith Smiley

Guest

What kind of cement do you use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.

Kayce Basques

Guest

Are concrete fence posts best?

Robust and sturdy: Concrete fence posts are much sturdier than timber, so you'll have peace of mind knowing that your fence is well supported and the post will still be standing after a strong wind or storm. This makes concrete posts ideal for exposed areas.

Domenic

Guest

Are concrete fence posts better than wood?

Robust and sturdy: Concrete fence posts are much sturdier than timber, so you'll have peace of mind knowing that your fence is well supported and the post will still be standing after a strong wind or storm. This makes concrete posts ideal for exposed areas.

Michał Miszczyszyn

Guest

Can concrete fence posts be repaired?

Temporarily remove wooden panel, break away all loose/flaky post material, build a wooden mould around each post to replicate original profile, fill with fresh concrete, leave to set. ... Then coat each post to reduce/prevent future frost damage.

Ohgodwhy

Guest

Can I extend concrete fence posts?

Extending the height of your fencing can be done in one of two ways. Simply slide the oversized panels into the existing concrete posts and then slot the post extension inbetween the panels onto the concrete post. ...

SudoPlz

Guest

Do you need concrete for vinyl fence posts?

Manufacturers unanimously require vinyl fence posts to be installed into a concrete filled post hole. Setting vinyl posts into concrete provides a consistent footing to ensure the posts will remain inline and true for years to come. Concrete should fill the post hole up to 3-4 inches from the top.