Best answer

You do not need rebar for any slab if you make it thick enough and space the joints properly. Rebar in jointed pavement is there to counter the cupping effect of thermal expansion. I always recommend the use of rebar or at least rewire. Any concrete slab can crack.

Answered by: ogrisel Date created: Jun 24, 2022

How many bags of cement do I need for a 10x10 slab?

Asked By: tpower Date created: Jun 13, 2022

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that's an extra 8 60-pound bags or 6 80-pound bags.

Answered By: SunnyShah Date created: Jun 16, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: Mayur Gajra Date created: Jun 12, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: aleksxor Date created: Jun 14, 2022

How many bags of concrete do I need for a 4x8 slab?

Asked By: sparrow Date created: Jun 22, 2022

Your project is 32 square feet at a depth of 4”. Here is the quantity that you will need for your slab. Quikrete Concrete Mix: 24- 60lb bags.

Answered By: Jim Lewis Date created: Jun 25, 2022

What is the minimum concrete cover for rebar?

Asked By: Jeff Scott Brown Date created: Jun 08, 2022

The minimum concrete cover requirements are based on exposure conditions and rebar size. In your case, the slab is not exposed to weather or in direct contact with ground, allowing for the 3/4-inch cover, provided the rebar is No. 11 or smaller.

Answered By: davnicwil Date created: Jun 11, 2022

Can you lay concrete without rebar?

Asked By: Thomas Uhrig Date created: Jun 22, 2022

It's false economy to do concrete without putting in rebar and mesh.

Rebar around the perimeter at the least, and mesh over the rest.

Pull it up when pouring so it is not resting on the bottom of the slab.

You don't need the fancy rebar supports, a stone or broken brick will work just as well..

Answered By: Rachel Date created: Jun 23, 2022

Do I need rebar in a concrete slab?

Asked By: Gh05d Date created: Jun 19, 2022

Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.

Answered By: wazz Date created: Jun 19, 2022

How many bags of concrete do I need for a shed base?

Asked By: aga Date created: Jun 15, 2022

Cement wise i would pour the base at 5-1 so you'll need maybe 7 bags of cement. If you still want to pay a fortune to buy your ballast in small bags get the 25kg ones and you will need approx 30 bags.

Answered By: JamesFaix Date created: Jun 17, 2022

How do you prepare for a concrete slab for a shed?

Asked By: Mike Two Date created: Jun 12, 2022

How to Pour a Concrete Slab for a Shed [Complete Guide]All you need to do is stake out your site, remove the topsoil, build and level your forms, spread and compact 4” to 6” gravel, lay out some rebar, and you're all set to pour your concrete slab.All storage sheds should have a foundation; whether pier, gravel or concrete.More items...

Answered By: Pengguna Date created: Jun 13, 2022

How many bags of concrete do I need for a 4x4 pad?

Asked By: Chris Fulstow Date created: Jun 19, 2022

The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab.

Answered By: Tore Nestenius Date created: Jun 21, 2022

How many bags of concrete do I need for a 10x20 slab?

Asked By: Alex Jolig Date created: Jun 23, 2022

A 60-pound bag yields . 017 cubic yards, and an 80-pound bag yields . 022 cubic yards. For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags.

Answered By: Dorad Date created: Jun 26, 2022

Related Question Answers

hadley

Professor

Do you need rebar in concrete patio?

Not all surfaces need concrete rebar reinforcement, but adding it makes concrete stronger and more resistant to large cracks. ... Without rebar reinforcement, concrete is highly prone to cracks due to tension forces. Rebar helps prevent cracks from growing wider largely by preventing cracked slabs from moving apart.

IAmYourFaja

Professor

How much concrete do I need for a 10x10 slab?

For a 10 x 10 slab, we'd suggest a mix with a capacity of about 4,000 pounds per square inch, or psi. This is basic for residential projects, and it can withstand traffic and support heavy loads.

UnkwnTech

Professor

How do you get rebar on a concrete slab?

Slide the rebar locator horizontally over the concrete until it beeps. Guide the locator slowly along the edge of the concrete and pay attention to the display. Watch for a bar or circle appearing in the middle of the screen, which means you're close to the rebar.

konrad.kruczynski

Professional

Can you pour concrete slab without rebar?

Not all surfaces need concrete rebar reinforcement, but adding it makes concrete stronger and more resistant to large cracks. ... Without rebar reinforcement, concrete is highly prone to cracks due to tension forces. Rebar helps prevent cracks from growing wider largely by preventing cracked slabs from moving apart.

Zirak

Professional

What size rebar do I need for a concrete slab?

Rebar in patios, basement floors, footings and driveways may vary from size 3 to 6. Contractors sometimes use the “1/8 Rule,” meaning the size of the rebar is 1/8 the thickness of the slab. For example, a slab that is 6 inches thick might have rebar marked as size 6 or 3/4-inch.

Cassio Seffrin

Professional

How do I add a new concrete slab to an existing slab?

Tie into the existing slabs When you're joining two concrete slabs, connect the two with rebar to keep them at the same height. Drill the holes as deep as you can (the entire length of the bit) so the rebar fits snugly into the holes. Insert chunks of rebar and tie them into the grid.

Yevhen Laichenkov

Professional

How do I get rid of concrete in my yard?

“Most concrete patios are un-reinforced, meaning that there is no rebar. So, in that case, a jackhammer is the best method to break the concrete into smaller pieces that can be shoveled away. If the area is very small, and the concrete is already cracked, a sledgehammer could also get the job done.”

Redu

Professional

Do concrete patios need rebar?

Do concrete patios need rebar? Even though it's possible to build a concrete patio without rebar, it's not recommended. All concrete is subject to cracks, but rebar holds all the cracks together and keeps the slab level and even. Without rebar, the cracks would become quite wide and the concrete would become uneven.

UMAR-MOBITSOLUTIONS

User

Do I need rebar for a concrete patio?

Do concrete patios need rebar? Even though it's possible to build a concrete patio without rebar, it's not recommended. All concrete is subject to cracks, but rebar holds all the cracks together and keeps the slab level and even. Without rebar, the cracks would become quite wide and the concrete would become uneven.

Always Sunny

User

Do I need rebar in a small concrete pad?

Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.

Joachim Sauer

User

Do I need rebar in concrete slab?

Rebar is recommended for concrete that measures 5-6 inches in depth. The type of and intended use of concrete impacts the need for rebar reinforcement. Rebar must be placed at the center of or slightly above the center of the concrete slab—hence why it should be a certain thickness for best results.

Cœur

User

Does 4 inch concrete need rebar?

No, depending on your proposed loads. But a 4″ thick slab really shouldn't have rebar in it, too thin. Most thing slabs, like driveways or sidewalks have a wire mesh reinforcement in them not rebar. ... If your slab is going to be subjected to enough load to need rebar it will also need to be thicker; 6″ or 8″.

Thomas Levesque

User

How much concrete do I need for a 24x24 garage?

Average Cost To Pour Concrete To pour a typical 10x10 concrete slab will cost $670 to $930, a 12x12 slab for a patio will cost $796 to $1,476, a 20x24 driveway slab runs between $1,440 and $3,360, and a 24x24 slab for a garage will cost $3,058 to $5,944.

Rukshan Jayasekara

Guest

Do I need a release agent for concrete forms?

Concrete forms, even if they are ground, smoothed and polished, require a release agent to prevent sticking and enable easy stripping. ... Watertight, oil-treated hardboards produce concrete surfaces of uniform color and require only small amount of a release agent.

intika

Guest

How much concrete should I get around my pool?

Table and chairs for up to eight requires a minimum 12' x 12' concrete slab. Small end tables and chairs do vary on size of the table. For concrete purposes we generally recommend 5' x 5' concrete slab. Tanning lounger/ Chaise loungers need a minimum of 8' of concrete off of the swimming pool.

Dave Cross

Guest

How do you pour concrete into a saw cut slab?

How to re-pour concrete in saw-cut slab? hammer-drill holes sideways into the cut surfaces of the concrete to make holes 3-inch deep for dowels (3/8 rebar that I already have sitting around) remove all loose material from the dirt hole. clean rocks and concrete out of the fill dirt.More items...•Jan 12, 2007

Gaurav Tiwari

Guest

How much rebar do I need for a concrete wall?

Rebar is placed horizontally and vertically in the wall, in a grid pattern. As a minimum, #4 rebar (1/2 inch) is spaced vertically at 36 inches on center, continued to within 8 inches of the top of the wall, placed on the tension side -- the inside face -- of the wall.

Brettski

Guest

Do I need rebar in concrete sidewalk?

Do Sidewalks Need Rebar? Most sidewalks don't need to be reinforced with rebar. Rebar is a steel bar used to reinforce the strength of concrete used to withstand heavy weight. ... General use sidewalks don't benefit from the addition of rebar.

Inigo

Guest

Does a concrete patio need rebar?

Rebar is not necessary for every concrete project. ... Wire mesh use is becoming much more common for projects like a home driveway. Reinforcing concrete with rebar or wire mesh not only makes the concrete strong, but it also significantly curtails the number of cracks that appear in that concrete down the line.

bkucera

Guest

Does a concrete walkway need rebar?

Do Sidewalks Need Rebar? Most sidewalks don't need to be reinforced with rebar. Rebar is a steel bar used to reinforce the strength of concrete used to withstand heavy weight. ... A reinforced sidewalk can complicate repairs.

Nicola Peluchetti

Guest

Do you need rebar in concrete footings?

Using Rebar for Concrete Deck Footings Plain concrete deck foundations without rebar are acceptable under the minimum standards of construction established in the International Residential Code.

...

Footings with large bearing areas or unstable soil can benefit from adding rebar to prevent cracking..

Cees Timmerman

Guest

How do you make a concrete slab stronger?

Reinforce a concrete pour with rebar or steel mesh. Rebar is the most common addition for strengthening the pour. In vertical or horizontal projects, the more rebar present in the concrete, the stronger the finished project will be.

Freewind

Guest

Do concrete steps need rebar?

As mentioned above, concrete steps must have rebar installed to reinforce the structure. As you can see here, these steps are reinforced with a lattice of rebar that also ties into the concrete sidewalk at the top of the steps, helping to hold all of it together.

Greg Gum

Guest

Do I need a footer for concrete patio?

You really do not want the patio level with the house threshold, too easy for water to get in to the house. As for the slab, it will not settle if you prepare the subgrade correctly. You need the footers to support the structure, the slab is just there to walk on, and has no structural importance.

prosti

Guest

Do I need rebar in concrete with fiber?

If you want to stop microcracks from growing into visible cracks, you need steel fibers. If you want to limit the width of cracks that will occur anyway, you need rebar. And if you want to achieve both goals, maybe you need both products.

gilly3

Guest

Does a concrete slab need rebar?

The purpose of concrete reinforcing bar is to provide concrete with greater tensile strength to minimize cracking.

Concrete slabs poured on the ground with a properly prepared and compacted base, and that isn't expected to support heavy loads, doesn't require rebar..

Andrew Chisholm

Guest

Do I need wire mesh for concrete patio?

For a concrete patio slab the best method of providing reinforcement is to use either wire mesh or steel bars (rebar) placed in a grid pattern. The use of rebar requires that each of the intersections of rebar be tied together with rebar tie wire. ... This must be done as soon as the concrete is poured.

David Storey

Guest

Do you need to put wire in a concrete driveway?

Wire mesh, like Rebar reduced the cracking and any uplift in the concrete driveway. Rebar will be used if there is a structural reason, meaning you need to carry the weight of the slab to pilings or plan to build above the slab. For a driveway, just use the wire, lap it one box around.

Praneel PIDIKITI

Guest

Does a small concrete slab need rebar?

Rebar is not necessary for every concrete project.

The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure..

F. Hauri

Guest

Does all concrete need rebar?

Concrete that carries heavy loads (such as footings, foundation walls and columns) almost always requires reinforcing steel. Not all concrete work requires reinforcing though. Concrete projects such as pathways, some driveways and small shed or playhouse floors, generally do not require any steel reinforcing at all.

doğukan

Guest

Does fiber concrete need rebar?

Sometimes you need steel fibers, and sometimes you need rebar, and only in a few limited situations can one effectively replace the other. To put it simply, steel fibers prevent cracks, while rebar limits the width of cracks. ... You can't do that with rebar. Example 2 is a concrete highway two miles long.

Fenton

Guest

Is rebar needed in concrete driveway?

Wire mesh, like Rebar reduced the cracking and any uplift in the concrete driveway.

Rebar will be used if there is a structural reason, meaning you need to carry the weight of the slab to pilings or plan to build above the slab.

For a driveway, just use the wire, lap it one box around..

Thomas Levesque

Guest

Will concrete crack without rebar?

Really depends on what the slab is used for but in general no you can install wire mesh or use fibered concrete. However you do need something to tie the concrete it just doesn't have to be rebar. You do not need rebar for any slab if you make it thick enough and space the joints properly. ... Any concrete slab can crack.

Laurenz Albe

Guest

How many bags of concrete do I need for a 12x12 slab?

Enter the size of the slab you want to build in square feet. The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab. (All yields are approximate and do not include allowance for uneven subgrade, waste, etc.)

Gray

Guest

How many bags of concrete do I need for a 10x12 slab?

The volume of concrete required for a 10- by 10-foot slab depends on the diameter of the slab. For a 4-inch slab, either eight 60-pound or six 80-pound bags are required, while for a 6-inch slab, either 12 60-pound or nine 80-pound bags are necessary.

Sam Firke

Guest

Can I pour concrete without rebar?

It's false economy to do concrete without putting in rebar and mesh. Rebar around the perimeter at the least, and mesh over the rest. Pull it up when pouring so it is not resting on the bottom of the slab. You don't need the fancy rebar supports, a stone or broken brick will work just as well.

Mykhailo Skliar

Guest

Do concrete piers need rebar?

We usually recommend that a minimum of two pieces of #4 rebar be placed vertically in an 8-inch-diameter concrete pier supporting a structure. ... The rebar provides the tensile strength needed to resist lateral stresses that can be applied to a concrete pier by ground movement, freeze cycles, and wind loads.

Denilson Sá Maia

Guest

Do I need gravel under concrete slab?

You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.

Muhammad Zahab Ahmad Khan

Guest

What should I ask a concrete contractor?

10 Questions to Ask a Concrete ContractorHow much experience do you have? ... Do you have a portfolio of pictures of your previous work? ... Can you provide references? ... What is your schedule like? ... How long will my project take? ... Will you need to obtain permits for my project? ... Will you be reinforcing the concrete with rebar?More items...

Sergey Berezovskiy

Guest

What size concrete slab need rebar?

This strength is crucial for things like buildings, roads and driveways. Rebar is not necessary for every concrete project. The general rule of thumb is that if you are pouring concrete that is more than 5 inches in depth, you are probably going to want to add in some rebar to help reinforce the entire structure.

Mikko Ohtamaa

Guest

Do concrete driveways need rebar?

The presence of rebar in a concrete project gives the final project considerably more strength than concrete alone. This strength is crucial for things like buildings, roads and driveways. Rebar is not necessary for every concrete project.