Best answer

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

Answered by: Shashank Agrawal Date created: Jun 27, 2022

How thick should plaster be on plasterboard?

Asked By: har07 Date created: Jun 21, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: Johnsyweb Date created: Jun 22, 2022

How thick should a concrete slab be for a mobile home?

Asked By: Olivier Refalo Date created: Jun 12, 2022

4 to 6 inches

Answered By: Jorgesys Date created: Jun 15, 2022

How thick does a concrete slab need to be for a garage?

Asked By: Jing Li Date created: Jun 17, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: Himanshu Sharma Date created: Jun 20, 2022

How thick should tile cement be?

Asked By: Antoniossss Date created: Jun 17, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: sparrow Date created: Jun 19, 2022

How thick should a concrete slab be for a shed?

Asked By: Patrick Hollweck Date created: Jun 16, 2022

Recommended Thickness of Concrete Slabs Shed Slabs: 3 1/2 inches thick. Shed floors that are being used for studio sheds or workshops will use a 3 1/2" thickness. Driveways: 4 inches, some areas require 5 inches. Many garage sheds need a driveway approaching the large shed door.

Answered By: wentjun Date created: Jun 16, 2022

How thick should a concrete driveway be?

Asked By: joachim Date created: Jun 15, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: Mirza Ahmed Baig Date created: Jun 17, 2022

How long should you wait to backfill a concrete retaining wall?

Asked By: David K. Hess Date created: Jun 20, 2022

Backfilling against reinforced concrete retaining walls shall not be permitted until the concrete has reached its 28 day strength.

Answered By: Magnetron Date created: Jun 20, 2022

How thick is the plaster on a gunite pool?

Asked By: AbolfazlR Date created: Jun 20, 2022

3/8-inchSwimming pool plaster topcoats should be of no less than 3/8-inch thickness.

Answered By: Michael P. Bazos Date created: Jun 23, 2022

How thick should a cement driveway be?

Asked By: ASH Date created: Jun 20, 2022

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: Even Mien Date created: Jun 21, 2022

How thick is the concrete on a tennis court?

Asked By: Houman Date created: Jun 17, 2022

100mmConcrete tennis courts technology has changed dramatically whereby the numerous expansion joints are not necessary. Depending on site conditions the normal slab is 100mm thick reinforced with F72 mesh. The strength of the concrete is 25mpa.

Answered By: Eric Leschinski Date created: Jun 19, 2022

Related Question Answers

FluxedScript

Professor

How thick does the concrete need to be for a car lift?

100mmThe minimum and recommended thicknesses of concrete slab for car hoists. Garage Equipment's two and four post hoists require a minimum of 100mm (about 4”) of reinforced concrete slab to be safely installed.

CertainPerformance

Professor

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

TheMaster

Professor

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

dm03514

Professional

How thick of concrete do you need for a 2-post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience.

Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed..

julien.giband

Professional

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

holmis83

Professional

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

Tanzim Chowdhury

User

How thick should concrete be for 2 post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience. Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.

Ali Faris

User

How thick should concrete be to hoist?

100mmYour hoist has specific requirements to secure safely to a concrete base. Make sure your concrete is thick enough to support your hoist, minimum thickness is 100mm. Also, ensure your concrete is in good condition with no major cracks.

Gordon Gustafson

User

How thick should concrete resurfacer be?

1/2 inchUnlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

murtaza52

User

How thick should my concrete driveway be?

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

jgauffin

User

What do you put under a concrete driveway?

Use wire mesh for driveways that are 4 to 5 inches thick, and rebar for those that are 5 inches or more. Place rebar in a grid pattern with a spacing between bars of approximately 12 inches. In either case, blocks should be used under the reinforcement to keep centered within the concrete.

Anders Abel

Guest

How thin can I make a concrete countertop?

Glass Fiber Reinforced Concrete can go as thin as 3/4″ for the same kitchen countertop slabs that would need to be 1.5″ thick for precast.

This instantly cuts the weight in half..

Murat Karagöz

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

ripper234

Guest

What goes under concrete driveway?

Use wire mesh for driveways that are 4 to 5 inches thick, and rebar for those that are 5 inches or more. Place rebar in a grid pattern with a spacing between bars of approximately 12 inches. In either case, blocks should be used under the reinforcement to keep centered within the concrete.

xpt

Guest

How much weight can my concrete driveway hold?

Concrete driveways are typically poured four inches thick, giving the concrete driveway enough strength to withstand loads of regular vehicles (up to approximately 8,000lbs). A fully loaded concrete truck can weigh over 70,000lbs, almost nine times heavier than your driveway was meant to withstand.

Captain Trojan

Guest

How thick should a concrete drive be?

For a standard driveway your sub-base should be at least 100mm deep (the same depth as the concrete), rising to 150mm if you plan to park larger vehicles on it. The hardcore sub-base needs to be in place and compacted before any ready-mix concrete arrives.

Saullo G. P. Castro

Guest

What is the best base for concrete driveway?

gravel baseThe gravel base for a driveway should be a minimum of 4 inches deep. If heavier vehicles, such as large trucks, will use the driveway regularly, the gravel should be even deeper, up to 12 inches. Poor soil or a sloped driveway may also require deeper gravel.

Mahan_F

Guest

How thick should a concrete pool deck be?

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

bbsimonbb

Guest

Can I paint my concrete driveway?

Driveway paint is very thick and the first coat should be thin enough to fill the rough concrete surface. Begin by painting the edges ('cutting in') and details of the driveway using a paint brush. Use a roller to apply paint evenly over the rest of the driveway. Leave the paint to cure for at least 16 hours.

Ardeshir ojan

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

sds

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

Michael Goldshteyn

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

Igor

Guest

Should I seal my concrete driveway every year?

Sealing the driveway yearly can lead to unsightly hairline cracks and peeling. And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. ... This is a good time of year for driveway work.

AnthonyWJones

Guest

How much should a concrete driveway cost?

A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install.

mjolinor

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

yojimbo87

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Zeta

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.

Christoph Rackwitz

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

JohnIdol

Guest

How do you fill large gaps between concrete slabs?

Dig a 4-inch wide trench along the sides of the slabs from the crack or gap closest to the house all the way down to the street or sidewalk. This trench should be a deep as the slabs are thick. Fill the trenches on either side of the driveway with small, rounded pea gravel (the size of marbles or peas).

TT.

Guest

When should a concrete driveway be replaced?

If properly installed and cared for, a concrete driveway should last about 30 years. Concrete driveways in colder climate areas may break down sooner but should still last approximately 20 years.

chandil03

Guest

When Should I seal my new concrete driveway?

A driveway sealer should be applied after the freshly poured concrete has cured. Most contractors find success waiting 7 to 14 days, but the official time for curing is 28 days. If you are having a patio poured at the same time, it should also be sealed.

vitaut

Guest

Do you need to put rebar in concrete driveway?

For a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. One common building reinforcement material is rebar.

Yevhen Laichenkov

Guest

How big can a concrete slab be without expansion joints?

Usually, expansion joints should be no farther apart than 2 to 3 times (in feet) the total width of the concrete (in inches). So for a 4 inch thick concrete slab, expansion joints should be no more than 8 to 12 feet apart.

Jeehut

Guest

How long should a concrete driveway last before cracking?

20 yearsA concrete driveway should last a minimum of 20 years, but a full replacement is necessary when cracks and pits are interconnected. If your foundation is lifting or there are numerous potholes across the surface of the concrete leading to drainage issues, it's time to replace the driveway.

Diodeus - James MacFarlane

Guest

How thick is a concrete driveway?

75-100mmConcrete paths should be 75-100mm thick, whereas drives, garage bases or hardstandings should be at least 100mm thick. For heavier use, such as large vans, use a 150-200mm thick concrete slab.

P0W

Guest

How thick is a reinforced concrete wall?

Reinforced concrete construction typically consisted of 4” or 6” (100 mm or 150 mm) thick, cast in situ, concrete external walls that were full height to the parapet and continuous with the foundations (Figure 1).

Swati

Guest

How thick should a concrete driveway be NZ?

100 mmHow thick should a concrete driveway be laid to.

A minimum of 100 mm is recommended.

Thickness is a major factor in determining the driveway's structural capacity..

weakish

Guest

How thick should a concrete garage floor be?

Standard Thickness The standard concrete garage floor is six inches thick and, with use of proper control joints, should be thick enough to withstand normal use.

Casimir et Hippolyte

Guest

How thick should a concrete shower pan be?

Thickness for Concrete Shower Pan – Base Layer The shower pan base mortar layer thickness should be approximately ½ to 1 inch thick. Since the shower floor already has a pre-slope, just apply a base mortar layer that has an even thickness throughout the shower floor area.

Gabriele Santomaggio

Guest

How thick should a concrete sunroom be?

Four inches is the minimum thickness for a concrete patio.

You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub..

Emile Bergeron

Guest

How thick should a load bearing concrete wall be?

Therefore I recommend that all the walls should be at least 9 inch thick. 4.5-inch thick walls are not structurally safe if they are beyond 7 feet in height or carry some imposed load.

Matthias

Guest

How thick should a stamped concrete patio be?

four inchesHow thick is stamped concrete? Our standard slab is a minimum of four inches. Some situations will require us to pour six inches of concrete, and this would be discussed before the project takes place.

Wolph

Guest

What depth should a concrete driveway be?

100mmFor a standard driveway your sub-base should be at least 100mm deep (the same depth as the concrete), rising to 150mm if you plan to park larger vehicles on it. The hardcore sub-base needs to be in place and compacted before any ready-mix concrete arrives.