Best answer

Will HardiePlank siding be too heavy for my house with its normal wall framing? ... Fiber-cement siding can weigh as much as 300 lbs per square (100 square feet) versus about 25% of that for vinyl siding.

Answered by: B Seven Date created: Jun 26, 2022

How long does fiber cement siding last?

Asked By: APC Date created: Jun 11, 2022

50 yearsNever try to stain fiber cement boards. With regular TLC, your fiber cement siding can last 50 years or more—now that's what I call long-lasting!

Answered By: Graham Ritchie Date created: Jun 14, 2022

Should you caulk fiber cement siding?

Asked By: Suren Srapyan Date created: Jun 10, 2022

Many professionals, like those at James Hardie, also agree that you should not use caulk on fiber cement siding unless there is no metal flashing underneath. Flashing acts as a waterproofing layer for this type of siding, and caulking will prevent the flashing from doing its job.

Answered By: Jeterson Miranda Gomes Date created: Jun 11, 2022

Do I need to waterproof cement board in shower?

Asked By: dcp Date created: Jun 09, 2022

Here's what the TCNA handbook has to say about the matter: “A waterproof membrane or vapor retarder membrane must be specified to prevent moisture intrusion and protect adjacent building materials.” ~B412 Bathtub or shower with prefabricated receptor. Cement board or Fiber-cement board.

Answered By: Tanner Dolby Date created: Jun 10, 2022

Can fiber cement siding rot?

Asked By: Elvin Mammadov Date created: Jun 23, 2022

Fiber cement siding, which was invented by manufacturer James Hardie®, is made from a mix of wood pulp and cement. This siding is very water resistant, and since rot is mostly caused by moisture, fiber cement siding is resistant to rot.

Answered By: Milo Chen Date created: Jun 23, 2022

Does fiber cement siding absorb water?

Asked By: Patrick Roberts Date created: Jun 17, 2022

Fiber Cement Absorbs Moisture Absorptive claddings like fiber cement can hold moisture, leading to panel damage, rot, and even mold problems. ... Close attention must be paid to all required gap clearances between rooflines and decks during installation, to not put fiber cement in continued contact with more moisture.

Answered By: Tiny Wang Date created: Jun 20, 2022

Does fiber cement siding contain asbestos?

Asked By: Aman Aggarwal Date created: Jun 15, 2022

Fiber cement siding used to contain asbestos, a naturally occurring mineral, for reinforcement. Asbestos, however, was later replaced by cellulose, a harmless material that makes wood rigid.

Answered By: jmj Date created: Jun 16, 2022

Does fiber cement siding increase home value?

Asked By: BlackVegetable Date created: Jun 12, 2022

One way to instantly increase your home's value is to add fiber cement siding. Adding fiber cement siding to your home adds to the curb side appeal, as well as keeping a lid on energy costs. ... The value of this product when reselling your home is almost $12,000. That works out to about an 84 percent cost to value ratio.

Answered By: Ricky Date created: Jun 13, 2022

How often do you have to paint fiber cement siding?

Asked By: Chris Kooken Date created: Jun 15, 2022

every 10 to 15 yearsIf you purchase prefinished fiber cement siding, you don't need to worry about painting it when it's time to install. Unfinished styles on the other hand should be painted shortly after installation. For both types, a new paint job can be done every 10 to 15 years.

Answered By: Dan Abramov Date created: Jun 16, 2022

Is fiber cement siding durable?

Asked By: Mecki Date created: Jun 18, 2022

Fiber cement is extremely durable and long-lasting. Fiber cement is formed through autoclaving, which bonds materials such as cement, sand and cellulose together using extreme steaming. Fiber cement is one of the most resistant and durable siding options for a home.

Answered By: Rawa Date created: Jun 20, 2022

What is not a benefit of fiber cement siding?

Asked By: nickbullock Date created: Jun 16, 2022

Labor costs are higher because fiber cement requires more manpower to deliver and install. Cost can be two to three times higher than aluminum or vinyl siding. If a homeowner is planning to sell within the next five years, investing in fiber cement siding might not be ideal.

Answered By: Philipp Claßen Date created: Jun 19, 2022

Related Question Answers

ekhumoro

Professor

Which is better vinyl or cement siding?

To start, vinyl can become more brittle with age and exposure to the elements. It can be damaged by wind debris, hail or any number of other external forces and may crack, buckle and warp with changing temperatures. By contrast, James Hardie fiber cement siding is more durable and up to 5x thicker than vinyl siding.

Alexander Udalov

Professor

Is fiber cement siding better than vinyl?

James Hardie® Fiber Cement Siding vs Vinyl Siding. ... By contrast, James Hardie fiber cement siding is more durable and up to 5x thicker than vinyl siding. It easily stands up to the elements, resisting damage from wind, rain, freezing temperatures and hail, and gives homes years of protection with low maintenance.

TheoretiCAL

Professor

Is fiber cement siding expensive?

Cost. According to the RSMeans 2014 Residential Cost Data report, the installed cost of vinyl siding is, on average, $201 per 100 square feet, while fiber cement totals $300 for the same area.

JGH

Professor

Can cement board be used around a fireplace?

You can use Hardiebacker board around your fireplace. However, using fiber cement board like Hardieboard is acceptable in locations including the mantel and fireplace surround.17 Jul 2017

Geoffrey Wiseman

Professional

Can concrete be too strong?

The paper, “202 Observations On Concrete That Is Too-Quickly-Strong,” cites cases where concrete cracked because it was too strong from too much cement and 66 investigations that related durability problems to cement hydrating too rapidly because of high values of fineness, C3S, C3A, and/or alkalies.

Henk Holterman

Professional

Can I use cement board around a fireplace?

Yes, HardieBacker® 1/4" Cement Board is deemed noncombustible when tested to ASTM E 136 and can be used in conjunction with other noncombustible materials around a fireplace. ... However, using fiber cement board like Hardieboard is acceptable in locations including the mantel and fireplace surround.

steveo314

Professional

Can you sand down textured plaster walls?

Gently sand the surface of the wall with sandpaper. If warm water removed most of the texture, a light sanding will likely smooth the wall surface. For plaster walls, it can take heavy continual sanding to remove the textured paint. Level the walls with drywall compound if the texture is too deep for complete removal.

Fabio Lamanna

Professional

Can you steam mop cement floors?

A steam cleaner is the most effective cleaning tool when cleaning concrete because the steam will penetrate even the tiniest of crevices to lift and remove dirt, debris, grease, stains, gum, odors, etc. ... Then, steam clean the floors with a floor cleaning head and if you have heavy stains use the micro fiber cover.

Gary Willoughby

Professional

Do concrete coasters absorb water?

These heavy duty coasters are made from cement combined with non-toxic recycled ash to make them ultra water-absorbent and heavy enough to prevent them from sticking to your glass. ...

Ken Chan

User

Do you install cement board before shower pan?

The wallboard must be installed 1/8 inch above the shower pan. If the shower pan is not in place, the wallboard height must be guessed, which can lead to inaccuracies and an expansion gap that is too large or too small.

madox2

User

Does cement board need to be painted?

Get the Timing Right. As a low maintenance material, fiber cement siding doesn't require frequent painting. If you purchase prefinished fiber cement siding, you don't need to worry about painting it when it's time to install. Unfinished styles on the other hand should be painted shortly after installation.

Farhad Farahi

User

Does water make concrete weaker?

If there is too much water, the chemical reaction (hydration) that "cures" the cement in the concrete is adversely affected if there is too much (or too little water) in the mix, leading to weaker concrete than if the optimum amount of water is used..

jpdugo17

User

Is fiber cement siding combustible?

Fiber cement siding has become popular, because it requires little maintenance, will not melt, is non-combustible, and can have a natural, wood-like appearance.

kn3l

Guest

Is Fibre cement sheeting fireproof?

Fiber cement is a composite material made of cement reinforced with cellulose fibers. ... Fiber cement siding has several benefits since it is resistant to termites, does not rot, is impact resistant, and has fireproof properties.

Paolo Bergantino

Guest

What kind of paint do you use on fiber cement siding?

Sherwin-Williams Duration® Exterior Latex Coatings are the best topcoat choices for new fiber-cement siding. Because they have a substantially higher film build than conventional paints, only one coat is necessary over a primed surface – and Duration is guaranteed not to peel or blister.

Axeman

Guest

What wood do you use for curved concrete forms?

Hardboard is inexpensive form material and is easy to flex into smooth curves. Hardboard siding is intended for exterior walls, but it's also great stuff for forming curves because it's flexible and cheap.

adamk

Guest

Can woodpeckers damage cement siding?

During breeding season, woodpeckers often peck the siding because the noise attracts potential mates. They also tend to nest in the siding. Such activities by woodpeckers can obviously damage your siding. ... Fiber cement siding isn't as prone to woodpecker damage as other siding options.

SQLMenace

Guest

Is cement sheet fire resistant?

Fibre cement is one of the most energy efficient materials on the market. ... More resistant to fire damage: Fiber Cement sheet cladding - is not only used as an exterior siding, it can also be utilized as a substitute for timber fascias and barge boards in high fire areas.

Tony Suffolk 66

Guest

Does too much water make concrete weak?

Water plays a critical role, particularly the amount used. ... If there is too much water, the chemical reaction (hydration) that "cures" the cement in the concrete is adversely affected if there is too much (or too little water) in the mix, leading to weaker concrete than if the optimum amount of water is used.

Luke

Guest

Does cement board in shower need waterproofing?

“A waterproof membrane or vapor retarder membrane must be specified to prevent moisture intrusion and protect adjacent building materials.” ~B412 Bathtub or shower with prefabricated receptor. Cement board or Fiber-cement board. Ceramic Tile. ... Consult local building code for moisture barrier requirements.”

YaOzI

Guest

How do you waterproof a concrete water tank?

Waterproofing of water tanks and reservoirs made of concreteAQUAMAT Cement-based waterproofing slurry.AQUAMAT-ELASTIC Two-component, elastic waterproofing slurry.DUROCRET-PLUS Polymer-modified,fiber-reinforced repairing cement mortar.RAPICRET Fast-setting patching mortar.PLASTIPROOF Plasticizing/water reducing admixture for concrete.More items...

sloont

Guest

Is fiber cement siding fireproof?

Although no siding can protect a home from total loss, fiber cement siding offers more fire resistance than other siding materials, giving you peace of mind about your home exterior. ... It's a combustible material, and offers you very little protection in case of a fire.

templatetypedef

Guest

What is the best fiber cement siding?

01 of 07. GAF WeatherSide. Known mainly as a roofing supplies company, GAF is laser-focused on one particular angle on the fiber-cement siding business. ... 02 of 07. James Hardie: HardiePlank. ... 03 of 07. Nichiha. ... 04 of 07. Allura Plycem. ... 05 of 07. Woodtone. ... 06 of 07. American Fiber Cement Corporation. ... 07 of 07. Finex.Sep 17, 2020

kuro

Guest

How long does paint last on fiber cement siding?

Fiber cement, especially HardiePlank, can go 10 or even 15 years between paintings.

It needs to be primed and given more than one coat and done by a professional, as with any painting job..

blowdart

Guest

Is surface bonding cement waterproof?

SURFACE BONDING CEMENT is a high density, waterproof, trowel applied coating composed of Portland Cement, finely graded aggregates, modifiers and construction grade fibers.

The fiber reinforcement allows concrete masonry units to be dry stacked, eliminating the need for mortar joints..

vanowm

Guest

Should you prime cement board before painting?

Using The Proper Materials and Paint- For fiber cement or HardiPlank siding, a very good latex primer should be used to prepare the surface for paint. After your surfaces are primed it is strongly encouraged to use acrylic exterior paint for your home.

Ahmad F

Guest

How do you reinforce plaster molds?

Sisal fiber makes good reinforcement for plaster molds. Wire can work too, but coathanger wire will rust. Make sure you let the plaster dry for a day or two before trying to unmold it. Also, make sure you're mixing the plaster correctly.

coreyward

Guest

Will cement set with too much water?

What happens when concrete is too wet.

...

When there is too much water in your concrete mix, however, it will have the opposite effect and the mix will be 'swamped', which will lower the rate that the chemical bonds form and therefore reduce the strength of the cured concrete..

Roland

Guest

Are cement trucks top heavy?

Cement and concrete trucks may not be the largest vehicles you share the road with, but many times they can be the heaviest.

Their load is precariously situated, leaving the truck very top-heavy and susceptible to rollover accidents.

...

When cars and cement mixer trucks meet in a collision, the results can be devastating..

Neil Barnwell

Guest

Are concrete countertops too heavy?

Countertops made of concrete really have no limitations in size, depending on the materials and casting techniques used. ... WeightA 1 ½ inch thick countertop made of standard concrete has an approximate weight of 18.75 pounds per square foot. (Granite is approximately 18 pounds per square foot.)

Nam G VU

Guest

Is cement a raw material?

The most important raw materials for making cement are limestone, clay, and marl. These are extracted from quarries by blasting or by ripping using heavy machinery.

splattne

Guest

How do you make cement flexible?

Other fibers such as silica fibers, glass fibers, steel fibers, and asbestos fibers can be used. These micro-fibers give the new concrete its flexibility. In addition, a slick coating or anti-frictional coating is used to reduce friction between the fiber particles in the cement.

Jason Punyon

Guest

What is the ideal location for setting up a cement factory?

1 Answer. Cement industry requires bulky and heavy raw materials like limestone, silica, alumina and gypsum. Heavy costs are involved in the haulage of the raw materials. Hence, economically, the ideal location for cement factories are near the sources of raw materials.

Hiren Patel

Guest

Can a concrete slab be poured in sections?

Pour the concrete in small sections Don't fill the whole form or giant sections because the mound of extra concrete you'll drag back with the screed board will get too heavy.

Nishant Nawarkhede

Guest

Can you pour concrete without wire mesh?

Instead of laying down a wire mesh before the concrete is poured, using fiber mesh involves mixing in different fibers such as glass, steel, synthetic fibers, or natural fibers. Fiber mesh reinforces concrete throughout the entire structure of the concrete rather than just one plane.

musicamante

Guest

Is concrete with fiber stronger?

Concrete fibers are ideal for many purposes, including making concrete even stronger than it already is and minimizing cracking. Continue reading as we break down three benefits of adding fiber to your concrete mix.

Chris F

Guest

Is fiber in concrete better than rebar?

The fiber mesh strengthens the concrete and the steel rebar reinforces the extra load areas. All concrete cracks. ... The fiber mesh is good stuff but can stick up above the concrete surface and look fuzzy.

ILikeTacos

Guest

What happens when cement is mixed with water?

Water is the key ingredient, which when mixed with cement, forms a paste that binds the aggregate together. The water causes the hardening of concrete through a process called hydration. ... Too much water reduces concrete strength, while too little will make the concrete unworkable.

Marcus Adams

Guest

What happens when you mix cement and water?

Water is the key ingredient, which when mixed with cement, forms a paste that binds the aggregate together. The water causes the hardening of concrete through a process called hydration. Too much water reduces concrete strength, while too little will make the concrete unworkable.

sbgib

Guest

What is 4000 psi concrete used for?

4000 PSI concrete is used for heavy traffic pavement, heavy use floor slabs like shops and warehouses, and concrete footings designed to support heavy loads.

ruakh

Guest

What is the best cement backer board?

Foam boards are lightweight, easy to cut, and a completely waterproof. Pictured: Wedi Board tile backer board.Schluter approves Kerdi over drywall.Hardibacker is the best known fiber cement board.Cement board has improved over the years and is easier to work with.Dec 29, 2015

Audrius Meskauskas

Guest

Is cement board a good insulator?

Fiber cement board has poor insulating qualities, but few people rely on their siding product to provide insulation on its own. This insulated variety makes vinyl a stronger and more rigid material to work with. Its popularity has also made it possible to produce the material in a wider variety of colors.

nacho4d

Guest

Is cement board heat resistant?

Hardiebacker is a brand name for a line of fiber cement boards used in construction projects. This material has strong moisture-resistance capabilities and is also heat resistant, making it an ideal liner for projects around your fireplace.

potter1024

Guest

What does it mean when concrete cracks?

Concrete in its non-solid state is basically just water and cement. As it hardens and the water evaporates, it shrinks. Too much water means too much shrinkage - and too much shrinkage leads to cracks in the finished project. This is usually a cosmetic flaw rather than a structural one.

Arash Motamedi

Guest

Can I pour concrete slab in sections?

Pour the concrete in small sections Don't fill the whole form or giant sections because the mound of extra concrete you'll drag back with the screed board will get too heavy.