Best answer

You will have to ensure that there is no wax, oil, grease, or soap scum on the face of the concrete slab that could ruin or reduce the bond. After that, I recommend that you install a sloped shower pan to contain the shower water and prevent harmful organisms from becoming resident in the surrounding walls and floor.

Answered by: Tim Gautier Date created: Jun 27, 2022

Do I need a vapor barrier behind cement board in shower?

Asked By: kaya3 Date created: Jun 19, 2022

Moisture barriers stop that water or vapor from getting any farther and potentially rotting your studs, the drywall or greenboard installed behind the enclosure. They are required beneath your shower pan and behind your shower walls.

Answered By: Alexander Artemenko Date created: Jun 22, 2022

Do I need to prep concrete floor for tile?

Asked By: Jeff Puckett Date created: Jun 21, 2022

Before you lay any sort of tile, whether it is stone, ceramic or peel and stick vinyl, you must prepare your concrete floor to ensure that the tiles will go down properly and stay where they're placed. Sweep the floor thoroughly to remove all dust and debris. Rinse the floor in small sections and then blot it dry.

Answered By: Adam Hughes Date created: Jun 24, 2022

Do I need to prime concrete floor before tiling?

Asked By: user7116 Date created: Jun 15, 2022

As a general rule, we would say use a primer of some description to prepare your floor prior to tiling. ... For instance, an old concrete floor that was tiled previously will probably not need a primer, as long as the surface is clean and free from old adhesive and anything else that was stuck to the floor.

Answered By: Malt Date created: Jun 16, 2022

Do I need to seal concrete floor before painting?

Asked By: trincot Date created: Jun 17, 2022

For a clean and even coat of paint, your concrete surface will need to be thoroughly cleaned before primer is applied. Use a strong sealer to fix any cracks and seal the interior surface of the concrete completely.

Answered By: uminder Date created: Jun 17, 2022

Can cement tiles be used in a shower?

Asked By: Kirby Date created: Jun 09, 2022

The most common question is, "Can I use them in my shower or bath?" The answer is definitely, "Yes!" Cement tiles can also be used in wet areas such as the bathroom floor, shower floor, shower wall, steam room or sauna. ... However, do not confuse encaustic cement tile with encaustic tile.

Answered By: gdbj Date created: Jun 11, 2022

Do you need to waterproof cement board in a shower?

Asked By: bguiz Date created: Jun 16, 2022

Cement board is not waterproof. Hardibacker is not waterproof. Tile and grout are not waterproof. Cement board will not fall apart when exposed to water.

Answered By: Shay Levy Date created: Jun 19, 2022

Do I need to waterproof cement board in shower?

Asked By: SeaBean Date created: Jun 10, 2022

Here's what the TCNA handbook has to say about the matter: “A waterproof membrane or vapor retarder membrane must be specified to prevent moisture intrusion and protect adjacent building materials.” ~B412 Bathtub or shower with prefabricated receptor. Cement board or Fiber-cement board.

Answered By: Hogan Date created: Jun 13, 2022

Can you use cement tiles in a shower?

Asked By: ASH Date created: Jun 24, 2022

The most common question is, "Can I use them in my shower or bath?" The answer is definitely, "Yes!" Cement tiles can also be used in wet areas such as the bathroom floor, shower floor, shower wall, steam room or sauna.

...

However, do not confuse encaustic cement tile with encaustic tile..

Answered By: Matias Elorriaga Date created: Jun 25, 2022

Do you put cement board under a shower pan?

Asked By: entlassungspapi Date created: Jun 08, 2022

Once the subfloor of proper thickness is properly installed then you can apply cement board directly to the subfloor material. ALL CEMENT BOARDS MUST be installed in a fresh bed of thinset. ... If you want the cement board under the shower tray then do so - doesn't matter.

Answered By: Sjoerd Date created: Jun 10, 2022

Do you need to waterproof concrete bathroom floor?

Asked By: bruno077 Date created: Jun 15, 2022

If the bathroom floor is either concrete or compressed fibre cement sheet flooring then there is no requirement for full waterproofing of the floor and the extent of floor waterproofing will depend on whether it has a bath with a shower over it or the shower recess is enclosed with a shower screen.

Answered By: tugberk Date created: Jun 15, 2022

Related Question Answers

ChillarAnand

Professor

Can I polish concrete floor yourself?

To polish concrete the do-it-yourself way, you're going to need a concrete grinder. ... Before burnishing one last time, put a thin coat of concrete sealer over the floor. The result will be a stone-like surface that gleams without the aid of floor waxes or oils.

Chas. Owens

Professor

Can I polish concrete yourself?

To polish concrete the do-it-yourself way, you're going to need a concrete grinder.

...

Before burnishing one last time, put a thin coat of concrete sealer over the floor.

The result will be a stone-like surface that gleams without the aid of floor waxes or oils..

kpimov

Professor

Can I use concrete for shower pan?

Concrete is perfectly adequate, if not recommended, for use as the shower pan base for materials such as stone, tile or mosaic tile to be used as the finish surface (as long as there is a proper membrane between the concrete and any vulnerable surrounding material).

Chris Gilardi

Professor

Can you do polished concrete in bathrooms?

A complete warm, cream bathroom (including the walls, floor and sink) can be made entirely of concrete. Whether you're building or renovating a laundry, toilet, shower or bathroom, for a high-gloss, low-maintenance finish, concrete polishing is the answer – it's a fine, no-wax flooring material.

Dupinder Singh

Professor

How do I clean a concrete shower?

Some good cleaners include Castile soap, liquid dish detergent, stone cleaners and mild floor cleaners. Mix a solution, apply to floor with a wet mop and then rinse with a mop dipped in clean water. To make your concrete floors resistant to future stains, apply a concrete sealant.

OmG3r

Professional

How do I find a water leak under a concrete slab?

Signs Of A Leak Under Concrete1). There is water or damp spots on your floor. If hot-water lines are leaking, this may also lead to warm spots on your floor. ... 2). You can hear the sound of rushing water underneath your floor. ... 3). There is a significant increase in your water bill.Jan 10, 2021

OscarRyz

Professional

How do I prepare my concrete for epoxy coating?

Prepping Your Concrete Floor Before you apply any coating, you need a clean, dry floor without debris, moisture, cracks or holes. Give the area a thorough sweep. Clean up any grease stains with a degreaser and a stiff brush. You don't need to remove all of the discoloration, just the greasy residue.

SherylHohman

Professional

How do you cement a toilet bowl?

HOW TO USE SAND & CEMENT TO SET A NEW TOILET PANPREPARE FOR THE MORTAR BASE. Carefully mark the outline of the area to be covered by the toilet pan. ... MIX THE SAND & CEMENT. Add one 20kg bag of Sand & Cement to a large bucket and add 3.5 litres of clean water. ... FORM A MORTAR BED. ... SET THE PAN ON THE MORTAR BED. ... FINISHING OFF.

twasbrillig

Professional

How do you fix low spots on concrete floor?

If you need to level low spots on your floor, use a concrete patching compound. The patching compound also works well to repair any cracks that formed when the concrete settled. You don't need many tools for this project, but you do need to wear protective gear for your eyes and hands. Work in a well-ventilated area.

Hristo

Professional

Can you use concrete in a shower?

Concrete is perfectly adequate, if not recommended, for use as the shower pan base for materials such as stone, tile or mosaic tile to be used as the finish surface (as long as there is a proper membrane between the concrete and any vulnerable surrounding material).

Stephen Quan

User

Do I need a shower pan liner on concrete floor?

JRC3 Member.

It will need to be lined or it will wick into the slab and studding.

The liner also makes the walls around the pan water-tight, that's why the liner normally goes up at least 3" above the pan behind the tile and backer material.

Moisture gets behind the wall tile and is eventually caught by the liner..

cameron1024

User

Do I need a vapor barrier between concrete and laminate flooring?

It is rolled out between the actual laminate flooring planks and the subfloor.

Very often, particularly in a below-grade installation on a concrete basement floor, a vapor barrier is recommended in addition to the underlayment.

That vapor barrier would go between the subfloor and the underlayment..

user7294900

User

Do I need a vapor barrier between concrete and wood flooring?

Despite a successful moisture check and the presence of an underground moisture barrier, you still need additional protection from water vapor before laying a wood floor. Sheets of 6-mil thick polyethylene plastic, overlapped with seams taped, is one means of providing that moisture barrier.

Eugene

User

Do I need to acid etch concrete after grinding?

Under ideal circumstances, acid etching works to expose the pores of the concrete. However, acid etching won't remove glues, mastics, caulk, and common stains, If your floor is marred or stained by these substances, you'll need to resort to grinding at least part of your floor.

Alain O'Dea

User

Do I need to insulate a concrete floor?

For solid concrete floors, make sure that if they need to be replaced, your builder puts in insulation – you have to insulate a floor when it is replaced in order to comply with building regulations. Solid floors are insulated using rigid insulation foam, which can be fitted either above or below the concrete.

Tom Hawtin - tackline

Guest

Do I need to prime a concrete floor before painting?

Generally speaking, priming is so essential to successful painting outcomes, concrete will always needs a primer. However, the existing surface needs to be primed before painting if: It is unpainted. It is peeling.

Ked Mardemootoo

Guest

Do I need to prime concrete before epoxy?

One of the most common questions I get with epoxy floors is if it is necessary to prime the floor before applying the epoxy floor coat.

...

The right primer will guarantee better adhesion of your floor coats to the substrate.

It will give your floor a longer life and will reduce the risk of the coat chipping or breaking..

Darrel Miller

Guest

Do I need to seal my concrete garage floor?

Because garage floors are protected from outdoor elements, they don't generally need sealed as often as a concrete driveway. However, most garage floors are made from concrete, making them susceptible to cracking and moisture intrusion from oil spills, antifreeze leakage, and other household chemicals.

Dan Dinu

Guest

Do I need underlay on concrete floor?

Concrete bases need an underlay with a moisture barrier, a damp proof membrane (DPM) or a separate barrier to protect the floor from damp. If the sub-floor is wooden the choice of underlay will depend on what is being laid on top.

TheMadTechnician

Guest

Do you have to waterproof a concrete bathroom floor?

If the bathroom floor is either concrete or compressed fibre cement sheet flooring then there is no requirement for full waterproofing of the floor and the extent of floor waterproofing will depend on whether it has a bath with a shower over it or the shower recess is enclosed with a shower screen.

Esailija

Guest

Do you install cement board before shower pan?

The wallboard must be installed 1/8 inch above the shower pan. If the shower pan is not in place, the wallboard height must be guessed, which can lead to inaccuracies and an expansion gap that is too large or too small.

Imran

Guest

Do you need a shower pan liner on concrete floor?

JRC3 Member. It will need to be lined or it will wick into the slab and studding. The liner also makes the walls around the pan water-tight, that's why the liner normally goes up at least 3" above the pan behind the tile and backer material.

Dr. Snoopy

Guest

Do you need to sand concrete before epoxy?

The entire floor should be sanded until no gloss remains on the old coating. Then vacuum and wipe up any dust from the sanding process. ... To finish preparing an uncoated concrete floor, you need to etch, acid wash or grind the floor, as a smooth floor will not allow the epoxy to adhere well.

mkl

Guest

Does cement board need to be sealed?

While you don't always need to seal backer board, it sometimes make sense to do so. If you are installing backer board in an area that will be subject to a great amount of moisture, like in a shower, then it makes sense to put a waterproofing sealer on it.

Aliaksei Kisel

Guest

Does concrete stain need to be sealed?

Do I Have To Seal Concrete We typically recommend sealing and waxing floors on any kind, but it is especially important for interior staining or any exterior areas that are high traffic. ... While protecting the floor from damage and making cleaning and maintenance of the floors substantially easier and less expensive.

G. Grothendieck

Guest

Do I need a permit to pour concrete in my back yard NYC?

In general, if you are doing any work which is going to modify your floor plan, then, you do need a permit. If you are going to pour concrete for a patio in your backyard, then, yes, you do need a permit.

akrun

Guest

Do you need underlay on concrete floors?

Most sub-floors will be either wood or concrete. Concrete bases need an underlay with a moisture barrier, a damp proof membrane (DPM) or a separate barrier to protect the floor from damp. If the sub-floor is wooden the choice of underlay will depend on what is being laid on top.

lmiguelvargasf

Guest

Can I cement my whole backyard?

In general, if you are doing any work which is going to modify your floor plan, then, you do need a permit. If you are going to pour concrete for a patio in your backyard, then, yes, you do need a permit.

Álvaro González

Guest

Does cement board in shower need waterproofing?

“A waterproof membrane or vapor retarder membrane must be specified to prevent moisture intrusion and protect adjacent building materials.” ~B412 Bathtub or shower with prefabricated receptor. Cement board or Fiber-cement board. Ceramic Tile. ... Consult local building code for moisture barrier requirements.”

har07

Guest

Do I need to seal a concrete floor before tiling?

7. Apply the Sealer. After cleaning, patching, and repairing the concrete floor, you'll be ready to seal it. This process creates a protective layer that prevents moisture from seeping through the concrete and into the tile floor.

Piskvor left the building

Guest

How much insulation do I need under a concrete floor?

A 50mm thick layer of proprietary floor slab insulation is usually enough to reach and maintain the target U value but this should be checked with an architect first. Insulation sheets should be laid tightly together with the joints staggered to avoid movement.

Laurie Young

Guest

Can I polish my own concrete floor?

To polish concrete the do-it-yourself way, you're going to need a concrete grinder. ... In addition, you'll have to get your hands on an assortment of grinding discs (in a wide variety of grits, from 30 to 3,000) as well as polishing pads. Polishing concrete bears some similarities to sanding a hardwood floor.

Alexander

Guest

Can you use Swiffer on concrete floors?

All You Need to Know About Polished Concrete Floor Cleaning First, let's talk about what you should not do to your polished concrete floor. Never use any acidic based cleaners like: Swiffer Wet-Jet.

Emil Vikström

Guest

Are concrete showers expensive?

Costs vary, but generally start around $3,000. Caution! A big tub might require beefier floor structure — consult an architect or structural engineer. Shower walls and floors: A concrete shower means no grout to scrub!

prograhammer

Guest

What type of plaster do I need?

What Type of Plaster & Plasterboard Do I Need?One coat plaster. Designed to act as a 2-in-1 base coat and finish. ... Multi-finish plaster. Provides a great, smooth coverage on a variety of surfaces. ... Bonding plaster. Easy to apply and spread. ... Browning plaster. ... Hardwall plaster. ... Tough coat plaster. ... Magnetic plaster.

Andy Arismendi

Guest

Do I need DPM on concrete floor?

Do I need a DPM under laminate flooring? Simply put yes. In order to prevent damp rising through the concrete floor and causing issues, a DPM should be used under all final floor types including wood flooring, laminate, vinyl and floor tiles.

Ramesh Rajendran

Guest

Do I need to screed a concrete floor?

Screeds are required when a colourful or functional floor is needed rather than a bare concrete surface. For industrial purposes, or commercial locations, which will undergo frequent traffic, a more robust screed is required than is used in DIY or residential projects.

Shyju M

Guest

Do I need cement board for shower ceiling?

It can be, but it's not really necessary. You can tile directly to drywall in any dry area. If your doors go all the way to the ceiling, you might consider cbu verses any kind of drywall on the ceiling, otherwise, it is considered a dry area.

Ken

Guest

Can you tile over concrete in shower floor?

Installing a tile shower floor is not difficult and will only take one weekend to complete. Since the shower is a potentially hazardous area it is recommended to use only ceramic, glazed, or tiles specifically designed for high moisture areas. Use the level to check the entire concrete slab for any unlevel areas.

mnemosyn

Guest

Can you use cement for a shower floor?

Combining a basic mortar mix with sand and Portland cement will create a good dry pack concrete. All of these mixes create a strong water resistant barrier for your shower floor and tile. Ahead we'll discuss each option in more detail.

palindrom

Guest

Can you use concrete mix for shower pan?

The best mortar for a shower pan is a mix of standard cement mix with sand and Portland cement.

...

A mortar mix provides the best base because it's very shapable, allowing the owner to fit whatever type of shower or bath pan into the supportive base..

trsvchn

Guest

Do I need to seal interior concrete floor?

To maintain this sealer it is recommended to wax the floor a few times a year. Resealing the floor with an acrylic sealer is highly recommended every 2-3 years to maintain proper mileage and protection of the concrete surface. SureCrete offers both solvent based and water based acrylic concrete sealers.

Jordan H

Guest

Do you need to waterproof concrete shower floor?

Many choose a denser-than-average mix and add a densifier to the cured concrete to reduce the porosity of the concrete and protect against water infiltration. Of course, proper sealing is critical for protecting the beauty of any concrete piece, but it is absolutely essential for wet areas like tubs and showers.

Yuchen

Guest

Do you need a shower liner on concrete floor?

JRC3 Member. It will need to be lined or it will wick into the slab and studding. The liner also makes the walls around the pan water-tight, that's why the liner normally goes up at least 3" above the pan behind the tile and backer material. Moisture gets behind the wall tile and is eventually caught by the liner.

Paweł Grondal

Guest

How do you install a shower tray on a concrete floor?

Fit the shower tray over the bed of adhesive and firm down ensuring the tray is level in all planes Identify the position of the drain and trap and remove any existing concrete to a depth of approx. 85mm down from the underside of the tray together with a channel to accommodate the waste pipe.

Karl Hill

Guest

What kind of cement do you use for a shower pan?

Floor Mud QUIKRETEQUIKRETE® Floor Mud (No. 1548-81) is a Portland cement based underlayment mortar designed for leveling travertine, slate and marble floor tile, and for shower pan applications.

TheoretiCAL

Guest

What kind of concrete do you use for a shower pan?

The best concrete mix for shower pans is made by Quikrete.

They make two products, the first is called Floor Mud, the 2nd is their Sand/Topping mix.

Both work great for building a shower pan..