Best answer

Natural stone veneer is heavy and should not be installed over drywall; cement backerboard or masonry applications are recommended.

Answered by: R.. GitHub STOP HELPING ICE Date created: Jun 25, 2022

Do I need to seal cement board before tiling?

Asked By: zneak Date created: Jun 11, 2022

Contrary to popular thought, tile and grout are not waterproof, and some moisture will penetrate even if sealant is used. ... However, if you choose to use concrete backerboard, which is much stronger and more durable than gypsum board, a water vapor membrane must be placed underneath it or a sealant applied on top of it.

Answered By: Evk Date created: Jun 14, 2022

Do I need a vapor barrier behind cement board in shower?

Asked By: Ovidiu Latcu Date created: Jun 15, 2022

Moisture barriers stop that water or vapor from getting any farther and potentially rotting your studs, the drywall or greenboard installed behind the enclosure. They are required beneath your shower pan and behind your shower walls.

Answered By: notionquest Date created: Jun 18, 2022

Do you need to waterproof cement board before tiling?

Asked By: laktak Date created: Jun 10, 2022

So, if you're looking for durability and strength, concrete backer-board will probably be your choice. First, you should provide a waterproof/resistant membrane against the wood studs before installing the concrete backer-board to protect the wood studs from moisture absorbed through the backer-board.

Answered By: Robin Moffatt Date created: Jun 10, 2022

Do you need to prime cement board before tiling?

Asked By: David Murdoch Date created: Jun 14, 2022

Do I need to prime HardieBacker® board before I tile onto it? No. HardieBacker tile backerboard is ready to tile once installed, just wipe down with a damp sponge to remove any dust prior to tiling.

Answered By: gdaras Date created: Jun 17, 2022

How many bags of cement do I need for a 2 bedroom house?

Asked By: P.... Date created: Jun 09, 2022

40 bags

Answered By: Learn2Code Date created: Jun 09, 2022

Do I need a concrete footing for a retaining wall?

Asked By: komeil majidi Date created: Jun 14, 2022

A concrete footing serves as the foundation of many construction projects. ... If you plan to use brick, cinder block or stone that will include the use of mortar, then a concrete footing is recommended. If you are building a segmental retaining wall, then you will not need a footing.

Answered By: Tianne Date created: Jun 17, 2022

How many bags of cement do I need for 1000 bricks?

Asked By: Rémi Rousselet Date created: Jun 15, 2022

3 bags cementTo lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.

Answered By: Thomas Uhrig Date created: Jun 16, 2022

How much sand and cement do I need for brickwork?

Asked By: Black Date created: Jun 13, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: Tushar Gupta - curioustushar Date created: Jun 13, 2022

Do you need to waterproof cement board in a shower?

Asked By: Gabe Moothart Date created: Jun 10, 2022

Cement board is not waterproof. Hardibacker is not waterproof. Tile and grout are not waterproof. Cement board will not fall apart when exposed to water.

Answered By: Ashh Date created: Jun 13, 2022

What plaster do I use for skimming?

Asked By: Adeel Imran Date created: Jun 15, 2022

Multifinish is ideal for (indeed, is manufactured for) using as a finishing plaster when there are a variety of backing surfaces to be covered. Board Finish: Board finish plaster is used on surfaces with low – medium suction. Plasterboard and Dry-Coat plaster will accept Board Finish well.

Answered By: Anthony Kong Date created: Jun 15, 2022

Related Question Answers

Andy Prowl

Professor

How many bags of concrete do I need for a shed base?

Cement wise i would pour the base at 5-1 so you'll need maybe 7 bags of cement. If you still want to pay a fortune to buy your ballast in small bags get the 25kg ones and you will need approx 30 bags.

Alvaro Montoro

Professor

Do I need to waterproof cement board in shower?

Here's what the TCNA handbook has to say about the matter: “A waterproof membrane or vapor retarder membrane must be specified to prevent moisture intrusion and protect adjacent building materials.” ~B412 Bathtub or shower with prefabricated receptor. Cement board or Fiber-cement board.

StaxMan

Professor

Do you need plastic behind cement board?

Their online instructions/diagrams show no use of a vapor barrier. You should, so that any moisture that gets behind the cement board runs into the tub or shower instead of into your wall cavity (causing rot or mold/mildew).

Alex B

Professor

Can I use deck screws for cement board?

It's best to use the cement board screw, but a deck screw will do just fine. ... Use screws designed for cement board like Rock-On screws. They start easier than drywall screws in CBUs. They're easier to use, don't rust as easily and hold better.

Tadeck

Professional

Can I use drywall mesh tape for cement board?

No. The Mold-X10 fiberglass mesh tape is made for drywall seams and intended to be coated with joint compound. FibaTape's Cement Board Tape is the product for cement board. The alkali-resistant coating protects the fiberglass from degradation that can occur with thin-set mortar.

firelynx

Professional

Do you need a vapor barrier behind cement board?

You still need a vapor barrier with cement board, although in this case the barrier can go behind the board. Cement board is heavy enough and breathable enough to take the moisture without a problem. By having the vapor barrier behind the cement board you stop the moisture going further into the wall.

toydarian

Professional

Do you need green board behind cement board?

Because cement board can be used either for floors or walls, the surface below the cement board will vary: ... In such wet areas, never install cement board directly over drywall or green board. Instead, first, remove the existing surface material, then install the cement board over the studs and membrane, as applicable.

Dr.Molle

Professional

Do you need to put a vapor barrier behind cement board?

You should NOT place a vapor barrier BEHIND the backer board. Where, pray tell, would any such collected vapor/water go? Answer:There's nowhere proper for such moisture to egress. The current best practice is to place waterproofing OVER the backetboard and just UNDER the tile.

Hitesh Sahu

Professional

Can I mix cement in a bucket?

If you need to mix concrete by hand, there are two options: ... It has all the ingredients dry mixed together for making concrete, i.e. the cement, sand and stone. All you have to do is put it into a bucket, wheelbarrow or on a piece of plastic on the ground, add water and spend a few minutes mixing it.

bhaginath

User

Can I use 1/4 cement board on floors?

Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment.

Mats Petersson

User

Can you tile directly onto cement board?

Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete. Manufactured veneer stone is another use for cement backer board.

Ken M. Haggerty

User

Can you glue stone veneer to cement board?

What can I put stone veneer on for an interior application? For interior applications, stone veneer can be installed over cement board, drywall, and all of the above.

Reto Koradi

User

Can you put cement over silicone?

Yes, silicone will stick to cement board.

In fact I highly recommend that you use cement board such as 'Durock' as your backer board.

Use proper screws.

Such as the specific cement board screw..

Tobias K.

Guest

Do I have to use cement board under Wall Tile?

In short, tile and grout are not inherently waterproof. ... Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete.

RbMm

Guest

Do I need to prime cement board before tiling?

Do I need to prime HardieBacker® board before I tile onto it? No. HardieBacker tile backerboard is ready to tile once installed, just wipe down with a damp sponge to remove any dust prior to tiling.

Daniel C. Sobral

Guest

Do you have to replace cement board under tile?

Undamaged cement backer board does not need to be replaced.

...

It is difficult to remove tile from a cement backer board, and even more difficult to avoid damaging the board in the process.

Since backer board is relatively inexpensive, it's not normally worth the time and labor it would take to remove the tile to save it..

Angew is no longer proud of SO

Guest

Do you need plywood under cement board?

The Surface Below the Cement Board Flooring: For ceramic tile floors, the cement board usually rests on a plywood subfloor (minimum 5/8-inch-thick exterior-grade plywood or OSB). ... In such wet areas, never install cement board directly over drywall or green board.

Andrew Thompson

Guest

Do you need Thinset under cement board?

Not only is thinset a critical component underneath cement board but the other critical component is the fasteners.

And you won't have the fasteners if you are trying to install it over concrete..

Quick learner

Guest

Does cement backer board burn?

The backer board will burn out eventually. You also need to build an insulated heat riser for best performance. A bell around/over the heat riser cannot be cement board as the heat in parts of that will be much too intense.

inspectorG4dget

Guest

Does cement board need to be sealed?

While you don't always need to seal backer board, it sometimes make sense to do so. If you are installing backer board in an area that will be subject to a great amount of moisture, like in a shower, then it makes sense to put a waterproofing sealer on it.

derhass

Guest

Does Loctite Power Grab work on cement board?

It will bond to drywall, plaster, vinyl cove base, polystyrene, polyurethane foam covings, PVC (rigid plastic), stainless steel, glass, wood, plywood, stone, brick, concrete, chip board, ceramics, foam board, cork, and carpet.

Santiago Squarzon

Guest

Does silicone stick to cement board?

Yes, silicone will stick to cement board. In fact I highly recommend that you use cement board such as 'Durock' as your backer board. Use proper screws. Such as the specific cement board screw.30 Sep 2015

Yong Shun

Guest

How many tons of crushed concrete do I need?

To figure out the how many tons you will need is not hard to do. You will have to know that the standard weight contractors use for crushed stone is 2700 pounds per cubic yard. Multiply the number of cubic yards by 2700 and divide by 2000. This value is the number of tons that you will need.

d-coder

Guest

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

Digital_Frankenstein

Guest

What do I need to make cement pots?

DIY Cement PlanterPortland Cement.5 Gallon Bucket (for mixing)Canola Oil.Plastic Containers or Paper Cartons.Polyethylene Sheet.Disposable Gloves.Stir Sticks.Potted Plants.Jan 12, 2016

Gilbert Le Blanc

Guest

What thickness cement board should I use?

Half-inch cement backer board is ideal for most tiling jobs, including walls, floors, countertops, and ceilings.

For flooring, the backer board should be installed over a 5/8-inch thick OSB or plywood base..

S.M_Emamian

Guest

What Thinset do I use for cement board?

Use thin-set mortar when installing cement backerboard. Thin-set dries slowly, allowing you to fix and readjust backerboard sheets as needed. With the smooth side of a 1/4-inch notched trowel, spread enough mortar for one sheet.

desertnaut

Guest

Will silicone adhere to cement board?

Yes, silicone will stick to cement board. In fact I highly recommend that you use cement board such as 'Durock' as your backer board. Use proper screws.

Dominique

Guest

Do I need cement board for kitchen backsplash?

But for a tile backsplash, if your wall is good and plumb, without any major ridges or problems, you don't always need to use a backer board, often you can just apply thinset to the walls and put your tiles in place.

cmbuckley

Guest

Do I need cement board for tile floor?

If you're working over a wood subfloor, cement board is the right choice for your tile base. No matter what you're told at a home center, it's not a good idea to install tile directly over plywood, especially in a damp area like a bathroom.

nickgryg

Guest

Does cement board in shower need waterproofing?

“A waterproof membrane or vapor retarder membrane must be specified to prevent moisture intrusion and protect adjacent building materials.” ~B412 Bathtub or shower with prefabricated receptor. Cement board or Fiber-cement board. Ceramic Tile. ... Consult local building code for moisture barrier requirements.”

Crazy Lazy Cat

Guest

Can I reuse cement backer board?

Undamaged cement backer board does not need to be replaced. If tile has not been attached directly to the backer board, and it has not been dented or punctured, it can be reused without any special preparation.

Josh Stodola

Guest

Do I need plywood under cement board?

Because cement board can be used either for floors or walls, the surface below the cement board will vary: Flooring: For ceramic tile floors, the cement board usually rests on a plywood subfloor (minimum 5/8-inch-thick exterior-grade plywood or OSB).

derfred

Guest

Should I put Thinset under cement board?

Embed the cement board in latex-modified thin-set mortar The main reason for using thin-set between the cement board and the subfloor isn't as much for bonding as it is for even, void-free cement board support throughout the floor. ... Then spread thinset mortar with the flat side of a 1/4-in.

BigBen

Guest

Should you put a vapor barrier behind cement board?

You still need a vapor barrier with cement board, although in this case the barrier can go behind the board. Cement board is heavy enough and breathable enough to take the moisture without a problem. By having the vapor barrier behind the cement board you stop the moisture going further into the wall.

PaulMcG

Guest

Can I mix concrete by hand?

A cement mixer does a great job at mixing concrete, thoroughly blending the materials to give a consistent result. However it's also possible to mix concrete by hand without a mixer with a little care and some effort. ... All you need for mixing concrete are cement, stone, sand and water.

Marvelous Ikechi

Guest

Do I need cement board for shower ceiling?

It can be, but it's not really necessary. You can tile directly to drywall in any dry area. If your doors go all the way to the ceiling, you might consider cbu verses any kind of drywall on the ceiling, otherwise, it is considered a dry area.

CB Bailey

Guest

Do you need special concrete for a fire pit?

A big issue I see in fire pits is that they are often built only using CMUs (concrete blocks), which are not designed for use with fire. ... The same holds true for the materials you use to fill the fire pit. Whether you use stone or glass, you should always use materials designed for high temperatures.

Frerich Raabe

Guest

How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

Dominic

Guest

Do I need cement board under floor tile?

If you're working over a wood subfloor, cement board is the right choice for your tile base. ... Because plywood expands and contracts beneath the ceramic tile, grout and tile failure (loose tiles and cracked, crumbling grout) is just a matter of time.

Oluwafemi Sule

Guest

Do you need to use thinset under cement board?

Not only is thinset a critical component underneath cement board but the other critical component is the fasteners. And you won't have the fasteners if you are trying to install it over concrete.

Casimir Crystal

Guest

How many bags of cement do I need for a shower pan?

Building a mud shower is really hard work. This one required 300 lbs (dry) of cement and sand. Another 300 lbs of cement board for the walls. More hundreds of lbs of tile, thinset and grout.