Best answer

Concrete is strong in compression, but not under tension. So, if it flexes, like a slab with a vehicle on top of will do, it cracks at the bottom whre the flexing becomes tension. ... Mesh will help mitigate the chances of cracking of the slab due to differential settlement.

Answered by: Vijjendra Date created: Jun 23, 2022

How many bags of cement do I need for a 10x10 slab?

Asked By: ecatmur Date created: Jun 12, 2022

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that's an extra 8 60-pound bags or 6 80-pound bags.

Answered By: yojimbo87 Date created: Jun 12, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: Sven Date created: Jun 13, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: naXa Date created: Jun 16, 2022

How many bags of concrete do I need for a 4x8 slab?

Asked By: Jesper Rønn-Jensen Date created: Jun 18, 2022

Your project is 32 square feet at a depth of 4”. Here is the quantity that you will need for your slab. Quikrete Concrete Mix: 24- 60lb bags.

Answered By: aheze Date created: Jun 20, 2022

Can I pour my own concrete slab?

Asked By: SherylHohman Date created: Jun 21, 2022

Pouring a concrete slab yourself can be a big money-saver or big mistake. We show you the best techniques and tools so you get concrete forms right the first time.

Answered By: Spektre Date created: Jun 22, 2022

How much concrete do I need for a 12x20 slab?

Asked By: Chris Haas Date created: Jun 09, 2022

Concrete Extras With a brief look, a 12x20 area at 6 inches deep, you would need approximately 6.31 tons or 4.44 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Answered By: Brennan Date created: Jun 09, 2022

Can I pour a 2 inch concrete slab?

Asked By: GibboK Date created: Jun 19, 2022

If done properly, new concrete can often be poured right over an existing slab. For this to be feasible, the contractor needs to pour at least 2 inches thick, use smaller aggregate, and incorporate reinforcement such as welded wire mesh or fiber mixed into the concrete.

Answered By: aminography Date created: Jun 19, 2022

Can you lay concrete without rebar?

Asked By: Mikołaj Głodziak Date created: Jun 09, 2022

It's false economy to do concrete without putting in rebar and mesh.

Rebar around the perimeter at the least, and mesh over the rest.

Pull it up when pouring so it is not resting on the bottom of the slab.

You don't need the fancy rebar supports, a stone or broken brick will work just as well..

Answered By: Stijn de Witt Date created: Jun 11, 2022

How do I keep my concrete slab from sinking?

Asked By: Surjeet Bhadauriya Date created: Jun 17, 2022

How can I prevent my concrete from sinking?Seal all open cracks and joints with a polyurethane or silicone caulk. ... Make sure downspouts are discharging at least five feet away from any concrete slab – the farther the better.More items...•

Answered By: Aplet123 Date created: Jun 17, 2022

How do I get rid of rats under my concrete slab?

Asked By: Tomasz Nurkiewicz Date created: Jun 16, 2022

Answer: If the patio slab is not connected to the house slab you can use a Giant Destroyer to help eliminate the rat. If there are many tunnels or if it is in an area where you cannot seal up the entrances you may want to consider using rat poison baits instead such as Fastrac or Contrac.

Answered By: beerwin Date created: Jun 18, 2022

How many bags of concrete do I need for a 4x4 pad?

Asked By: IBAction Date created: Jun 14, 2022

The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab.

Answered By: dan1st Date created: Jun 16, 2022

Related Question Answers

Abhilash Chandran

Professor

Do I need to seal my concrete floor before tiling?

Although you don't need to install an underlayment between the concrete and the tile, you need to prepare the surface before placing the tile. After all, cracks and uneven areas in the concrete can cause damage to the tile above, and uncontrolled moisture in the concrete can destroy the mortar and loosen the tiles.

Richard Cook

Professor

How many yards of concrete do I need for a 16x16 slab?

With a brief look, a 16x16 area at 6 inches deep, you would need approximately 6.73 tons or 4.74 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

dev

Professional

Does a concrete slab need wire mesh?

YES When long joint spacing is required or when joints are unacceptable in floor use.

Although short joint spacings alleviate the need for reinforcement, wire mesh will allow for increased distance between joints if correctly placed in the upper portion of the slab, at least two inches below the surface..

Lalit Fauzdar

Professional

Do I need rebar for small concrete slab?

You do not need rebar for any slab if you make it thick enough and space the joints properly. Rebar in jointed pavement is there to counter the cupping effect of thermal expansion. I always recommend the use of rebar or at least rewire. Any concrete slab can crack.

Ben Whaley

Professional

How much cement do I need for a 20x20 slab?

With a brief look, a 20x20 area at 6 inches deep, you would need approximately 10.52 tons or 7.41 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Kylaaa

Professional

Do I need rebar in concrete slab?

Rebar is recommended for concrete that measures 5-6 inches in depth. The type of and intended use of concrete impacts the need for rebar reinforcement. Rebar must be placed at the center of or slightly above the center of the concrete slab—hence why it should be a certain thickness for best results.

Bas Leijdekkers

Professional

Do I need to seal my concrete garage floor?

Because garage floors are protected from outdoor elements, they don't generally need sealed as often as a concrete driveway. However, most garage floors are made from concrete, making them susceptible to cracking and moisture intrusion from oil spills, antifreeze leakage, and other household chemicals.

Think Twice Code Once

User

Does 4 inch concrete need rebar?

No, depending on your proposed loads. But a 4″ thick slab really shouldn't have rebar in it, too thin. Most thing slabs, like driveways or sidewalks have a wire mesh reinforcement in them not rebar. ... If your slab is going to be subjected to enough load to need rebar it will also need to be thicker; 6″ or 8″.

jjmontes

User

How do I stop my concrete sinking?

How can I prevent my concrete from sinking?Seal all open cracks and joints with a polyurethane or silicone caulk. ... Make sure downspouts are discharging at least five feet away from any concrete slab – the farther the better.More items...•Dec 21, 2018

Piskvor left the building

User

How much concrete should I get around my pool?

Table and chairs for up to eight requires a minimum 12' x 12' concrete slab. Small end tables and chairs do vary on size of the table. For concrete purposes we generally recommend 5' x 5' concrete slab. Tanning lounger/ Chaise loungers need a minimum of 8' of concrete off of the swimming pool.

Shoe

User

How can I strengthen my concrete slab?

There are also some other techniques used for strengthening a reinforced concrete slab such as:Increasing the shear bearing capacity of the slab by adding steel plates strengthened by vertical screw bolts.Strengthening of the slab by post stressed reinforcement.Adding steel beams.More items....

Anders Abel

Guest

How do I stop moisture in my concrete floor?

Methods Used to Stop Moisture in Concrete FloorsLow-permeance Vapor Barrier or Retarder.

A Low-permeance vapor Barrier or retarder can effectively keep below-slab moisture from reaching the flooring system.

...

Allow Natural Drying of Concrete Slab.

...

Keep Excavation Free of Water..

Jeff Yates

Guest

Can I cement my whole backyard?

In general, if you are doing any work which is going to modify your floor plan, then, you do need a permit. If you are going to pour concrete for a patio in your backyard, then, yes, you do need a permit.

Simeon Visser

Guest

How do I protect my concrete slab foundation?

We have some tips for you to maintain the health and strength of your slab foundation and help protect the integrity and structural strength of your home:Maintain a Consistent Level of Moisture. ... Proper Drainage. ... Proper Placement of Trees. ... Maintain a Consistent Temperature Inside Your Home.More items...•Jan 30, 2020

Zachary Wright

Guest

How do I calculate how much concrete I need for my driveway?

Multiply the square footage by the depth in feet to find the volume of the space in cubic feet. Volume is found by measuring length × width × depth. Finally, divide the cubic footage by 27 to find the volume in cubic yards. This is the amount of concrete needed.

solarissmoke

Guest

Can you use wire mesh in concrete slab?

YES When long joint spacing is required or when joints are unacceptable in floor use. Although short joint spacings alleviate the need for reinforcement, wire mesh will allow for increased distance between joints if correctly placed in the upper portion of the slab, at least two inches below the surface.

flawr

Guest

How do you keep wire mesh on concrete slab?

Dobies/Chairs: Small concrete blocks or plastic chairs are placed between the base & the wire mesh to hold the wire mesh in the center of the slab. Both come in an assortment of sizes and ensure the wire mesh remains in the center of the slab.

merv

Guest

What can I do with my concrete backyard?

Concrete Patio IdeasPaint a Pattern. Yes, you can paint your concrete slab. ... Lay Decking Flooring. Did you know you can lay decking over a concrete slab? ... Add Curves With Pavers. ... Lay Slate Tiles. ... Stain the Concrete to Look Like Tile. ... Add a Beautiful Outdoor Rug. ... Paint Concrete. ... Dress it Up.More items...•Feb 18, 2021

SuperString

Guest

Do I need concrete reinforcing mesh?

And yes, mesh is important: Concrete is strong in compression, but not under tension. So, if it flexes, like a slab with a vehicle on top of will do, it cracks at the bottom whre the flexing becomes tension. Steel mesh will prevent this to a large degree and hold it all together.

Michael

Guest

How do you make a concrete slab stronger?

Reinforce a concrete pour with rebar or steel mesh. Rebar is the most common addition for strengthening the pour. In vertical or horizontal projects, the more rebar present in the concrete, the stronger the finished project will be.

Jon Erickson

Guest

Do I need a footer for concrete patio?

You really do not want the patio level with the house threshold, too easy for water to get in to the house. As for the slab, it will not settle if you prepare the subgrade correctly. You need the footers to support the structure, the slab is just there to walk on, and has no structural importance.

Samselvaprabu

Guest

Do I need to cut my concrete slab?

“The minimum depth of sawcut using a wet conventional saw should be the greater of at least 1/4 of the slab depth or 1 in. (25 mm). The minimum depth of sawcut using an early-entry dry-cut saw should be 1 in. ... Some slab designers require cutting the slab the following day to 1/4 of the slab depth to deepen the 1 in.

Pra_A

Guest

Do I need to reinforce my concrete slab?

Concrete is an incredibly resilient material, which is why it's used so much in building and construction work. However, some types of concrete structure require reinforcements, which are often put in place as the mixture sets.

Dzenis H.

Guest

Do you need mesh in concrete countertops?

“No material more than 3/16-inch in diameter should be used in a countertop less than 3 inches thick.” ... Ladder wire and wire mesh are used by many concrete countertop contractors, and for good reason: Both materials are strong and small enough to use effectively in countertops.

Kaushik Ghosh

Guest

Do I need wire mesh for concrete patio?

For a concrete patio slab the best method of providing reinforcement is to use either wire mesh or steel bars (rebar) placed in a grid pattern. The use of rebar requires that each of the intersections of rebar be tied together with rebar tie wire. ... This must be done as soon as the concrete is poured.

holdenweb

Guest

Do you need to put wire in a concrete driveway?

Wire mesh, like Rebar reduced the cracking and any uplift in the concrete driveway. Rebar will be used if there is a structural reason, meaning you need to carry the weight of the slab to pilings or plan to build above the slab. For a driveway, just use the wire, lap it one box around.

Nathan Fellman

Guest

Is rebar needed in concrete driveway?

Wire mesh, like Rebar reduced the cracking and any uplift in the concrete driveway.

Rebar will be used if there is a structural reason, meaning you need to carry the weight of the slab to pilings or plan to build above the slab.

For a driveway, just use the wire, lap it one box around..

Jeena

Guest

Will concrete crack without rebar?

Really depends on what the slab is used for but in general no you can install wire mesh or use fibered concrete. However you do need something to tie the concrete it just doesn't have to be rebar. You do not need rebar for any slab if you make it thick enough and space the joints properly. ... Any concrete slab can crack.

McGarnagle

Guest

How many bags of concrete do I need for a 12x12 slab?

Enter the size of the slab you want to build in square feet. The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab. (All yields are approximate and do not include allowance for uneven subgrade, waste, etc.)

hilberts_drinking_problem

Guest

Do I need gravel under my concrete slab?

Whether you pour concrete for a walkway or patio, a strong gravel base is required to prevent the concrete from cracking and shifting.

Gravel is especially important in clay soil because it doesn't drain well, which results in water pooling under the concrete slab and slowly eroding the soil as it finally drains..

cham

Guest

Should I insulate under my concrete slab?

Creating an insulation layer and a vapor barrier between the concrete slab and the ground beneath it is the best practice in insulating basement floors. The insulation barrier will help keep warm air in, and the vapor barrier will keep unwanted moisture out.

Sheridan

Guest

Should I put wire mesh in concrete slab?

Wire mesh makes concrete more durable and increases its strength. The area in which the concrete will be laid down should be covered in mesh before pouring commences.

Darkman

Guest

How many concrete stamps do I need?

How many stamps do I need for my project? Take your dimensions of your project and figure out which direction you will run your stamps. Next measure what your longest run will be. Ideally you want the enough stamps to cover your first row and 2 stamps for the second row.

timgeb

Guest

Can I pour concrete without rebar?

It's false economy to do concrete without putting in rebar and mesh. Rebar around the perimeter at the least, and mesh over the rest. Pull it up when pouring so it is not resting on the bottom of the slab. You don't need the fancy rebar supports, a stone or broken brick will work just as well.

fregante

Guest

How do I know if my concrete floor has moisture?

By comparing the weight of the calcium chloride before and after the test time (60 to 72 hours), it indicates not just whether moisture is present, but the quantity and rate of moisture vapor travelling upwards through the slab. Kits typically measure the moisture in the top ½ inch or ¾ inch of the concrete slab.

TheAlphamerc

Guest

Do I need gravel under concrete slab?

You do need gravel under a concrete slab, footing, or patio. Gravel provides a solid foundation for your concrete as it can be compacted. It also improves drainage, preventing water from pooling beneath the concrete.

Eddie

Guest

Do I need steel mesh in my concrete slab?

No, they do not. Larger projects or slabs may need steel reinforcement to provide support or extra strength. Wired mesh can also help resist cracking. However, not every piece of concrete necessarily requires that extra boost.

Mechanical snail

Guest

Do I need to seal my concrete sidewalk?

Concrete surfaces like driveways, walkways or sidewalks, in a general sense, do not have to be sealed or protected to perform well. As a matter of fact, a concrete driveway will last for years without being sealed, but once it begins to deteriorate it can be too late to stop it.

Dean Harding

Guest

What should I ask a concrete contractor?

10 Questions to Ask a Concrete ContractorHow much experience do you have? ... Do you have a portfolio of pictures of your previous work? ... Can you provide references? ... What is your schedule like? ... How long will my project take? ... Will you need to obtain permits for my project? ... Will you be reinforcing the concrete with rebar?More items...

DSM

Guest

Do I need a concrete slab for a Tuff Shed?

Do I need a concrete slab for a Tuff Shed storage building? No, in most cases. While garages do require a concrete slab, our exclusive steel joist system has more than adequate strength and moisture resistant qualities to provide a solid foundation for your shed on most ground surfaces.

Mureinik

Guest

Do I need a permit to pour a concrete slab in Florida?

Yes, you will be required to pull a permit when removing a tree, including dead trees. Do I need to obtain a permit to pour a concrete slab, patio, or driveway? Yes, a site plan will be required with a description of what is being done.