Best answer

25 to 50 mmThe minimum recommended thickness is 1 to 2 in. (25 to 50 mm) for a fully bonded concrete overlay placed on a base slab that is practically free of cracks and in which the concrete is sound, clean, and of good quality.

Answered by: jmj Date created: Jun 24, 2022

How thick should plaster skim be on plasterboard?

Asked By: Elad Date created: Jun 23, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set. Cover the entire surface in one go — don't stop halfway.

Answered By: jhamm Date created: Jun 26, 2022

How thick should plaster be on plasterboard?

Asked By: Kimvais Date created: Jun 20, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: Anees Hameed Date created: Jun 21, 2022

How thick should a concrete slab be for a mobile home?

Asked By: Chris Jester-Young Date created: Jun 11, 2022

4 to 6 inches

Answered By: Jaap Date created: Jun 12, 2022

How thick does a concrete slab need to be for a garage?

Asked By: scotty3785 Date created: Jun 08, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: Chamod Dissanayake Date created: Jun 10, 2022

How thick should tile cement be?

Asked By: Emile Bergeron Date created: Jun 11, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: Fenton Date created: Jun 13, 2022

How thick should concrete footings be?

Asked By: atreeon Date created: Jun 08, 2022

Footing thickness - 8 to 12 inches. Footing depth - varies based on frost line and soil strength (some footings can be shallow, while other must be deep)

Answered By: benzado Date created: Jun 09, 2022

How thick should a concrete driveway be?

Asked By: davidcondrey Date created: Jun 22, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: hlin117 Date created: Jun 24, 2022

How thick does concrete need to be for heavy equipment?

Asked By: Christian Oudard Date created: Jun 16, 2022

Six inchesSix inches of thickness should be more than adequate for areas where heavy equipment will be driven and parked. For lesser loads, four inches.

Answered By: zellio Date created: Jun 18, 2022

How thick is the plaster on a gunite pool?

Asked By: Yushan Date created: Jun 25, 2022

3/8-inchSwimming pool plaster topcoats should be of no less than 3/8-inch thickness.

Answered By: Benjamin Wohlwend Date created: Jun 26, 2022

How thick should a cement driveway be?

Asked By: Jeremy Date created: Jun 08, 2022

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: Axeman Date created: Jun 09, 2022

Related Question Answers

Nix

Professor

Can I put cement over cement?

Yes, you may pour a concrete pad overlay over an existing slab. You need to consider the added height and weight of the overlay on the existing structure. Overlays may include polymers, portland cement concrete, or epoxies. You should improve the drainage of the slab by having a good slope on the overlay.

hmjd

Professor

Can you add onto a concrete slab?

Yes, you may pour a concrete pad overlay over an existing slab. You need to consider the added height and weight of the overlay on the existing structure. Overlays may include polymers, portland cement concrete, or epoxies. ... You should improve the drainage of the slab by having a good slope on the overlay.

eerorika

Professor

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

Martin Konicek

Professor

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

Kip

Professional

How much do concrete overlays cost?

The price of concrete overlay can be anywhere from $25 to $150 per square metre. This is a wide range of prices. There is a big difference between doing a complete concrete resurfacing and just a light overlay for decorative purposes.

Nathan Smith

Professional

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

Mario F

Professional

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

Laurence Gonsalves

User

How thick should concrete be to hoist?

100mmYour hoist has specific requirements to secure safely to a concrete base. Make sure your concrete is thick enough to support your hoist, minimum thickness is 100mm. Also, ensure your concrete is in good condition with no major cracks.

trojanfoe

User

How thick should concrete resurfacer be?

1/2 inchUnlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

Jeff Foster

User

How thick does a concrete sidewalk need to be?

100mmSidewalks should be at least 4" (100mm) in thickness.

Simple slabs for small foundations, bases, etc., normally 4" to 6" (100mm to150mm) thick, depending on the load they must bear.

Slope the walk away from buildings to provide proper drainage..

Ilya Gazman

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

Steve McLeod

Guest

How thick is a stamped concrete overlay?

1/4 to 3/4 inchThe overlay mix is usually applied by a gauge rake (a tool with an adjustable depth gauge for achieving a uniform topping thickness), and then imprinted with stamping mats or texturing skins. Overlay thicknesses range from 1/4 to 3/4 inch, depending on the depth of the imprint.

ashleedawg

Guest

How thick should a concrete drive be?

For a standard driveway your sub-base should be at least 100mm deep (the same depth as the concrete), rising to 150mm if you plan to park larger vehicles on it. The hardcore sub-base needs to be in place and compacted before any ready-mix concrete arrives.

Rico Kahler

Guest

How thick should a concrete pool deck be?

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

NathanOliver

Guest

How do I make a concrete overlay?

Before the overlay can be applied, the surface of the slab must be properly cleaned, patched, and primer applied. Cleaning involves removing any anti-adherents and then pressure washing to eliminate loose debris creating a clean palette for applying bonding primer before patching damaged areas and applying the overlay.

asemahle

Guest

Can I do concrete overlay myself?

Self-Level Polish Overlay Mix - Can be used as a polished overlay floor mix or a self leveling underlayment mix. Concrete Rescue Micro-Topping Overlay Mix - Use for a new canvas on concrete floors, restoration of concrete floors, and repairing sidewalks, walks, driveways, and pool decks.

TechySharnav

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

shoosh

Guest

How thick does concrete need to be to not crack?

4 inchesApplied-load cracking. In residential concrete, 4 inches is the minimum thickness for walkways and patios. Garage slabs and driveways should be 5 to 6 inches thick if any heavy truck traffic is anticipated, otherwise 4 inches is adequate.

Super Jade

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

Roland

Guest

How thick should a reinforced concrete driveway be?

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

FDuhen

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

Damn Vegetables

Guest

How hot can Concrete get before cracking?

How thick should concrete be to withstand four hours of temperatures of 2000 degree F without degrading or failing? The concrete barrier likely will be exposed to more than 2000 degrees F.

Shepmaster

Guest

How hot can Concrete get before it cracks?

How thick should concrete be to withstand four hours of temperatures of 2000 degree F without degrading or failing? The concrete barrier likely will be exposed to more than 2000 degrees F.

chuckj

Guest

How thick does a concrete overlay have to be?

25 to 50 mmThe minimum recommended thickness is 1 to 2 in. (25 to 50 mm) for a fully bonded concrete overlay placed on a base slab that is practically free of cracks and in which the concrete is sound, clean, and of good quality.

spender

Guest

How thick does a concrete overlay need to be?

25 to 50 mmThe minimum recommended thickness is 1 to 2 in. (25 to 50 mm) for a fully bonded concrete overlay placed on a base slab that is practically free of cracks and in which the concrete is sound, clean, and of good quality. The use of welded wire fabric reinforcement is usually not warranted under these conditions.

diegueus9

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Yahya parvar

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

lukasgeiter

Guest

How thick should finish plaster be?

2mmWhat thicknesses are plasters applied? Undercoat plasters are usually applied at 11mm and most finish coat plasters are applied at 2mm.

Collin Jackson

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.

Lorin Hochstein

Guest

How thick should pool plaster be?

Swimming pool plaster topcoats should be of no less than 3/8-inch thickness. An online look at several pool builders shows they apply plaster to in-ground concrete pool at thicknesses from 3/8 inch up to 5/8 inch.

IntelliJ Amiya

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

LinPy

Guest

How thin can concrete overlay be?

Concrete overlays less than 6 inches (152 mm) thick are commonly identified as “thin” concrete overlays, while the term “ultra thin” is sometimes used to refer to overlays less than 4 inches (102 mm) thick. These thin overlays also feature smaller slab sizes, with 6 ft by 6 ft (1.8 by 1.8 m) panels commonly used.

Spindizzy

Guest

How long does it take concrete overlay to dry?

24 hoursHow long does it take concrete overlay to dry? For a concrete overlay system like X-Bond, it takes 24 hours after the last coat of sealer for the surface to be able to be walked on with protection.

Peter Lawrey

Guest

How do you make concrete overlay mix?

Simply mix 2 parts sand and 1 part cement together before you add any water. If you decide to do a thick overlay, mix 3 parts rounded gravel, 2 parts sand and 1 1/2 parts cement. Feel free to add another half measure of cement for an extra-strong overlay.

Cheers and hth. - Alf

Guest

How does concrete overlay work?

A concrete overlay involves preparing your existing concrete surface before laying new concrete on top of the slab or floor. The concrete overlay can be stamped, dyed, and stained to achieve a beautiful final result. The prep work is important to avoid delamination and ensure the overlay will last for many years.

J Fabian Meier

Guest

How long does a concrete overlay last?

20 yearsHow long is the life span of a decorative concrete Overlay? If maintained and sealed properly, the DCO can last 20 years and be a permanent topping to the concrete slab. Every 5 to 7 years it should be resealed.

PYA

Guest

How big can a concrete slab be without expansion joints?

Usually, expansion joints should be no farther apart than 2 to 3 times (in feet) the total width of the concrete (in inches). So for a 4 inch thick concrete slab, expansion joints should be no more than 8 to 12 feet apart.

mdaniel

Guest

How thick is a concrete driveway?

75-100mmConcrete paths should be 75-100mm thick, whereas drives, garage bases or hardstandings should be at least 100mm thick. For heavier use, such as large vans, use a 150-200mm thick concrete slab.

Antoine Pinsard

Guest

How thick should a concrete garage floor be?

Standard Thickness The standard concrete garage floor is six inches thick and, with use of proper control joints, should be thick enough to withstand normal use.

KingNestor

Guest

How thick should a concrete shower pan be?

Thickness for Concrete Shower Pan – Base Layer The shower pan base mortar layer thickness should be approximately ½ to 1 inch thick. Since the shower floor already has a pre-slope, just apply a base mortar layer that has an even thickness throughout the shower floor area.

Alexander Bird

Guest

How thick should a concrete sunroom be?

Four inches is the minimum thickness for a concrete patio.

You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub..