Best answer

approximately 44kgsThe 8ft long (2.440m) intermediate post has a section size of 94mm x 109mm and weighs approximately 44kgs....Specifications.TypeConcrete Slotted Intermediate Fence PostLength2440mm (8ft)Weight44 kg2 more rows

Answered by: prosti Date created: Jun 23, 2022

Can I mix concrete in the hole?

Asked By: Mizipzor Date created: Jun 10, 2022

Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix. Wait about 4 hours to begin constructing your fence or applying heavy weight to your post.

Answered By: vitaliis Date created: Jun 12, 2022

Can you put dry concrete in a post hole?

Asked By: bdukes Date created: Jun 17, 2022

Fast-setting concrete is ideal for setting posts because there's no mixing—you simply pour the dry concrete from the bag right into the hole, then add water. ... Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

Answered By: Zilog80 Date created: Jun 19, 2022

How long does it take for concrete to dry in a post hole?

Asked By: Naros Date created: Jun 15, 2022

Typically, you can apply some weight to the posts after 4 hours, but it's a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.

Answered By: Gulzar Date created: Jun 16, 2022

Do I need to cement fence posts?

Asked By: Gildas Garcia Date created: Jun 14, 2022

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

Answered By: Aristotle Pagaltzis Date created: Jun 14, 2022

Do you put concrete inside vinyl fence post?

Asked By: Mike M. Date created: Jun 14, 2022

Concrete is the foundation of the fence. Using concrete in the foundation point will allow consistency for all of the vinyl fence posts. The ground is always settling and moving. Having concrete as the foundation of your vinyl fence posts creates a firm base that won't move and minimizes the posts moving.

Answered By: AlexR Date created: Jun 16, 2022

Do you have to concrete chain link fence posts?

Asked By: Ben.S Date created: Jun 18, 2022

Traditionally, chain link fences are held in place by buried posts surrounded in concrete. However, it is possible to install a chain link fence without concrete. With a hole that is the proper size, either gravel or a polymer backfill can keep fence posts in place for many years.

Answered By: xdsarkar Date created: Jun 20, 2022

How deep should a concrete fence post be in the ground?

Asked By: nulltoken Date created: Jun 14, 2022

Concrete fence posts must be fixed into the ground in the traditional way: by digging a hole. When concreting fence posts into the ground, the posts should be buried a minimum of 600mm deep. The recommended depth for a 1.80m or 6 foot high fence is 760mm or 2' 6".

Answered By: MikeT Date created: Jun 16, 2022

How much concrete do I need for a 4x4 fence post?

Asked By: Jeena Date created: Jun 17, 2022

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Answered By: quamrana Date created: Jun 20, 2022

How many bags of concrete do I need for a 3 foot post hole?

Asked By: Thanh Nguyen Van Date created: Jun 13, 2022

I normally use post hole diggers (6" diameter?) 3 feet deep and ½ a bag of redi-mix per post.

Answered By: Steven G Date created: Jun 13, 2022

How do you calculate concrete for a fence?

Asked By: BringBackCommodore64 Date created: Jun 18, 2022

You need to find out how much fencing you need in linear foot or linear meter and multiply that amount with the fence height pricing you want. For example, if you require 150 linear foot worth of 6 feet high concrete fence. Your material estimate will be 150 x $40 = $6000.

Answered By: ianhanniballake Date created: Jun 20, 2022

Related Question Answers

Explosion Pills

Professor

How long does quikrete concrete take to harden?

20 to 40 minutesThe concrete sets up in 20 to 40 minutes, so you can quickly move on to the next stage of the project (a great convenience when setting fence posts) or backfill the hole to finish the job. Under normal curing conditions, you can apply heavy weight to the post (a basketball backboard, for example) after just 4 hours.

mrhn

Professor

How many bags of concrete do I need per fence post?

two bagsOur example post will require two bags for every post if you're using fast-setting concrete. Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow.

eftshift0

Professor

How long should concrete cure for fence posts?

Give it time when dry setting the fence posts Like a good wine, a dry setting concrete will take time to set fully. A quick setting product may not be the best one, and the standard setting time is around four hours. Make sure the post is plumb at all times during the process.

NicoE

Professional

What's best concrete or wooden fence posts?

Although wooden fence posts are one of the cheapest ways to support your fence panels, concrete is a far more robust, long lasting structure, meaning you get much more for your money..

Giorgi Imerlishvili

Professional

Will concrete rot fence posts?

A: Actually, your point is well taken. Simply setting the posts in concrete does create a condition that will accelerate rot in the bottom of the posts. With pressure-treated posts, the rot will be slow. ... The concrete at the top should be sloped away from the post to grade level to avoid water pooling around the base.

Maheshvirus

Professional

Do you have to use concrete for fence posts?

Setting Fence Posts in Concrete Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

BinaryMisfit

Professional

How much concrete is needed for a fence post?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing.

Your post diameter and height determine how big each hole needs to be.

As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post..

Kenton Varda

Professional

How deep do concrete fence posts need to be?

600mmConcrete fence posts must be fixed into the ground in the traditional way: by digging a hole. When concreting fence posts into the ground, the posts should be buried a minimum of 600mm deep. The recommended depth for a 1.80m or 6 foot high fence is 760mm or 2' 6".

Quick learner

User

How do you cement a vinyl fence post?

Not All Cement Is Created Equal – Don't Pour Until You Are SureDig and prepare the holes in advance.Line the bottom with pea gravel.Set the post straight in the hole.Pour the dry setting cement.Give it time when dry setting fence posts.

sdgfsdh

User

How do you secure wood fence panels in concrete posts?

Lay your fence panel on the ground with its "front" facing up.Step 1: Reinforce Your Fence Panel. ... Step 2: Make Legs. ... Step 3: Clamp the Legs. ... Step 4: Roll it Over. ... Step 5: Lift the Structure to Sit Vertically. ... Step 6: Remove Clamps and Lengths of Wood.

Venkatesh Talacheeru

User

How much concrete do I need for 6x6 post?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground. The diameter of your post hole should be three times the diameter of your post.

Sean Patrick Floyd

User

How much concrete do I need for a steel fence post?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place.

The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.

Depth of the hole is one-third to half the above ground height of the fence post..

Mr. Polywhirl

Guest

How much concrete do I need to set a post?

Remember, the depth of the post hole should be one-half of the above-ground post height.

(Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

The calculator will indicate the number of 50 lb.

bags of QUIKRETE® Fast-Setting Concrete you need..

Hanfei Sun

Guest

How much concrete is in a post hole?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground.

ligi

Guest

How thick of concrete do you need for a 2-post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience.

Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed..

Erwin Bolwidt

Guest

How thick should concrete be for 2 post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience. Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.

James McMahon

Guest

Is driving posts better than concrete fence?

Driving posts into the ground allows you to establish a firm foundation for your fence without going to the trouble of augering and pouring concrete. ... In most cases, pounding posts into the ground is better than augering and pouring concrete to place your fence posts.

Kyle

Guest

Should I cement chain link fence posts?

Securing your fence posts with concrete makes your fence more stable and reliable. Anchoring your chain link fence posts with concrete is a sure way to make sure your fence stands strong for years to come.

Dan Lowe

Guest

How many bags of concrete do I need for a fence post hole?

1 - 4 bagsMost fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

Zachiah

Guest

How deep should a concrete fence post be?

600mmConcrete fence posts must be fixed into the ground in the traditional way: by digging a hole.

When concreting fence posts into the ground, the posts should be buried a minimum of 600mm deep.

The recommended depth for a 1.80m or 6 foot high fence is 760mm or 2' 6"..

Frank Heikens

Guest

How much concrete is needed for a gate post?

Add 4 to 6 inches of concrete to the bottom of the hole, or enough to hold a post steady. Set a post in position. Use a carpenter's level to ensure the post is straight up and down, or plumb. Adjust the height of the post so you have the desired amount above ground.

Siddharth Rout

Guest

How long does concrete fence post last?

25-yearConcrete fence posts require no after-sale treatment and require minimal upkeep for the duration of their 25-year lifespan. The main challenge is to ensure water does not get into the post's foundations, as this freeze and expand, loosening the fence post.

Paul Sasik

Guest

How do you make sure new posts stay plumb while the concrete is setting?

Hold a carpenter's level against all sides of the post to ensure it is plumb, or straight up and down. Once you are sure the post is plumb, fill the hole with concrete. Take care not to disturb the post as you add the concrete. Check the post again with the level to make sure it is still plumb, and adjust if necessary.

Cyril N.

Guest

How many bags of concrete do I need for a chain link fence post?

A 40-pound bag of concrete mix makes 0.3 cubic feet, 60-pound bags make 0.45 cubic feet and 80-pound bags make 0.6 cubic feet. For the example given, 56 of the 40-pound bags, 37 of the 60-pound bags or 28 of the 80-pound bags will be needed for the fence installation.

Rahul Tripathi

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

pzaenger

Guest

How much concrete is in a fence hole?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Olivier Rogier

Guest

What kind of concrete should I use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.

Andrej Kesely

Guest

How much concrete do I need for fence posts?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

user1032613

Guest

Should you use concrete for fence posts?

Concrete is the most secure material for setting fence posts, especially if you have sandy soil. Gravel may be okay with dense, clay-heavy soil, but in looser soil, concrete is the only thing that will truly keep your fence posts stuck in place.

Sotirios Delimanolis

Guest

Do you have to cement chain link fence posts?

Traditionally, chain link fences are held in place by buried posts surrounded in concrete.

However, it is possible to install a chain link fence without concrete.

With a hole that is the proper size, either gravel or a polymer backfill can keep fence posts in place for many years..

Nejat

Guest

How do you pour concrete in post holes?

Set the post into the hole and attach 2x4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.

BelHadjSalem TALEL

Guest

How long does concrete take to dry in post hole?

Typically, you can apply some weight to the posts after 4 hours, but it's a good idea to wait at least 24 hours before resuming fence construction. Standard concrete mixes may take up to two hours to set and should cure for 24 to 48 hours before any forces are applied to the posts.

Dominique

Guest

Can you mix concrete in post hole?

Instead of filling in the top of the hole with soil that could hold moisture at the base of your fence post, add a little more concrete to divert rainwater away from the post and protect it from rot at ground level. You'll need just a bucket or wheelbarrow to mix the concrete and a trowel to smooth it in place.

Bjorne

Guest

What can I do with old concrete bags?

How to Dispose of ConcreteRent a Roll Off Dumpster.

This is a quick and affordable way to dispose of concrete, asphalt and other heavy construction debris, such as bricks.

...

Leave a 'Free' Sign Out.

...

Dump It Yourself.

...

Take It to a Concrete or Landscape Supplier.

...

Use It in Your Own Landscaping.

...

Create a Retaining Wall or Privacy Fence..

ATOzTOA

Guest

How do I keep my fence post straight when concrete is set?

Setting the Post You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

John

Guest

How do you cement a 4x4 post?

Project InstructionsDig post hole so diameter of the hole is 3 times the width of the post (i.e., the hole for a 4” wood post should be about 12 inches wide).

...

Add about 6 inches of QUIKRETE All-Purpose Gravel into the bottom of the hole.

...

Set the post into the hole and attach 2x4 braces to adjacent sides of the post.More items....

decpk

Guest

How do you repair a fence post with concrete Spurs?

How to Fix a Wobbly Fence with a Concrete Repair SpurDig a hole for the spur. First you need to make some space for your new spur. ... Make adjustments. ... Measure twice, drill once. ... Secure your spur! ... Marvel in your solid fence.Feb 9, 2018

doberkofler

Guest

How do you repair wooden gravel boards to concrete posts?

The quickest and easiest way of fixing gravel boards to timber fence posts is to use timber “cleats”. These are small pieces of pressure treated batten that are screwed to the fence post and the gravel board is then screwed to the cleat.

Tim Biegeleisen

Guest

How do you replace a concrete fence post?

Dig a hole around 1 side of the fence post. With a shovel, break into the ground surrounding the fence post's concrete base. Keep digging until you create a half-circle gap between the ground and concrete. If possible, dig a hole that is as deep as the concrete itself, giving the post as much wiggle room as possible.

chatax

Guest

How do you stop fence panels moving in concrete posts?

Fitting these fencing clips is easy – simply press them flat and slide them into the gap. They will expand again to take up the gap between the fence panel and concrete post. As I found, larger panels really do need six clips each, to prevent the panel from being buffeted and the spring clips working themselves out.

rixo

Guest

How do you straighten a concrete fence post without removing it?

The Fix-A-Fence SolutionStep 1 – Prepare the Site. ... Step 2 – Prepare the Fix-a-Fence Kit. ... Step 3 – Position the Bracket in the Hole. ... Step 4 – Mix a 60lb Bag of Concrete. ... Step 5 – Fill the Hole with Concrete. ... Step 6 – Take a Break While the Concrete Cures. ... Step 7 – Reposition the Fence Post and Attach the Bracket.

gagneet

Guest

How far should concrete fence posts be in the ground?

eight and a half feetBeing heavy, you will need two people to fix concrete posts into the ground and there is only one way to do it – by digging deep holes. A six-foot fence panel will need at least eight and a half feet posts (basic maths = at least two and a half feet into the ground!).

manojlds

Guest

How long do concrete fence post last?

around 20 yearsConcrete is a durable building material and can last for around 20 years with minimal maintenance. Sounds promising doesn't it? Surprisingly, concrete isn't immune to wear and tear. Excessive wind and rain can cause concrete posts to chip and crack.

Arghya Sadhu

Guest

How long do concrete posts take to set?

How long does concrete take to set in a post hole? We would advise waiting at least four hours before any weight or pressure is applied to the posts or fence holes. For best results, you should wait at least 24 hours before you continue hole and fence construction.

charchit

Guest

What is the best concrete to use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow.

Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4..

RaGe

Guest

What kind of cement do you use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.

bk2204

Guest

Are concrete fence posts best?

Robust and sturdy: Concrete fence posts are much sturdier than timber, so you'll have peace of mind knowing that your fence is well supported and the post will still be standing after a strong wind or storm. This makes concrete posts ideal for exposed areas.