Best answer
Cement required for 1000 sq ft roof:– cement required for roof slab will depend on thickness of roof, thickness of roof varies between 4 to 6 inch as construction design, cement required for 1000 sq ft roof is ranging between 76 to 114 bags of cement.
How many bags of concrete do I need for a 6x6 slab?
0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.
How do I calculate how much plaster I need?
For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand). For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand). The thickness of plaster is between = 12 mm to 15 mm. Always use Good quality of cement (Different grades of cement) as well as good quality sand.
How many bags of cement do I need for 1000 bricks?
3 bags cementTo lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.
How many bags of cement do I need for a house?
About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home.
How much sand and cement do I need for 100 bricks?
A good mix for bricks would be 6 sand to 1 cement. You can lay probably 180 bricks per mix using 6 sand (25kg bag) and 1 25kg bag of cement.
How much sand and cement do I need for brickwork?
1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.
How long does it take for Black Jack roof cement to dry?
30-60 daysAllow product to cure a minimum of 30-60 days prior to application of reflective coating. COVERAGE RATE: One gallon covers approximately 12 sq. ft. when applied 1/8" thick.
How many concrete piers do I need?
An 8 ft x 12 ft shed will need 6 piers, 3 per long side. Typically, the span between two piers is based on the dimensions of the beams and the joists. A double 2×8 beam should be supported every 4 to 6 feet. A 2×8 joist can normally span 8 feet.
How many bags of cement do I need for 1000 square feet?
400 bagsCement bags About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home.
How much cement do I need for a brick wall?
Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.
Related Question Answers

EJBEAN
ProfessorHow much does a concrete sleeper retaining wall cost?
$250 to $350 per sq/m for treated pine. $300 to $450 per sq/m for treated timber sleepers/hardwood. $300 to $550 per sq/m for sandstone blocks. $400 to $680 per sq/m for reinforced concrete blocks.

Siebe Jongebloed
ProfessorHow much sand and cement do I need for 100 blocks?
You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Andrew Grimm
ProfessorHow much sand and cement do I need for 1000 blocks?
For laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.

Aaron Digulla
ProfessorHow much sand and cement do I need for blocks?
For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

GuiFalourd
ProfessorHow do you fix a leaking concrete tile roof?
If a tile roof leaks, you'll need to remove the tile over the leak, repair the area with asphalt roofing cement, and replace the tile. 4 Press all tiles down gently but snugly.

Abe Miessler
ProfessionalHow much cement do I need for 1000 square feet?
About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home. Sand is not only required for preparing RCC, mortar and plaster but also used for filling and flooring too. Sand consumed is about 1200 cubic ft.

Kirk Strauser
ProfessionalHow much cement do I need for 1m3 concrete?
Typically, 1m3 of concrete is made up of 350Kg of cement, 700Kg of sand, 1,200Kg of chippings and 150 Litres of water..

pedrofb
ProfessionalHow much would a 30x40 concrete slab cost?
30x40 Garage Concrete Slab CostCONCRETECOST PER SQ FT*TOTAL COST*CONCRETE Standard 4" Concrete SlabCOST PER SQ FT* $6 - $7TOTAL COST* $7,200 - $8,400CONCRETE 6" Concrete SlabCOST PER SQ FT* $7 - $8TOTAL COST* $8,400 - $9,6001 more row•Jan 27, 2021

Anurag Uniyal
ProfessionalHow many bags of concrete do I need for a 8x8 slab?
How many concrete bags would I need for a 8 ft x 8 ft x 6" slab? 54 x 80lb Concrete bags. How much does it cost to pour a 8'x8' x6" slab? Ready-mix costs approx $277.86.

Diodeus - James MacFarlane
ProfessionalHow many yards are in a 30x40 concrete slab?
22.222 cu. yds. How many concrete bags would I need for a 30 ft x 40 ft x 6" slab?

Ben Voigt
UserHow do I work out how much plaster I need?
For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand).
For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand).
The thickness of plaster is between = 12 mm to 15 mm.
Always use Good quality of cement (Different grades of cement) as well as good quality sand..

Matt
UserHow do you clean concrete haze?
How to remove Grout Haze Residue – Cement GroutsAlways test a small area first to ensure satisfactory results.Sweep or vacuum surface.Apply Grout Haze Clean-Up full strength onto a manageable area of up to 10 sq. ft. ( ... Allow to dwell 5 to 10 minutes. ... Agitate with a scrub brush or scrub pad.Mop up dirty solution.Rinse thoroughly with clean water.

user4815162342
UserHow much does it cost to put concrete in backyard?
The typical concrete patio is approximately 288 sq ft and costs an average of $2,800 (about $9 per sq ft); depending on a variety of factors, your cost will likely fall between $1,300 and $5,100 ($3-$15 per sq ft).

Paul Sasik
UserHow do I keep my concrete roof cool?
How to Keep a Concrete House Cool (4 Effective Tips)Construct a pergola that covers your roof.Place plants on your roof (only for flat roofs).Construct a trellis that covers your roof.Add insulation to your roof to prevent heat absorption.

acw1668
UserHow many bags of concrete do I need for a 5x5 pad?
How many concrete bags would I need for a 5 ft x 5 ft x 6" slab? 20.8 x 80lb Concrete bags.

diedu
GuestHow do you fix a leaking concrete roof?
For this, you will need to first clean the entire roof surface with a pressure washer. Fill in large cracks with mortar or roofing cement, then apply a good concrete primer. Once the primer is dry, apply an elastomeric sealant to the cracks, corners, and damaged areas, and then to the entire roof.

Aliaksandr Sushkevich
GuestHow much concrete do I need to fill a 55 gallon drum?
As to how many bags....a 55 gallon drum filled clear to the top is actually closer to 60 gallons. And 60 gallons is 8 cu ft. So if you buy 60lb bags, those do 1/2 cu ft each so you would need 16 of them. IF you buy 80lb bags (2/3 cu ft) you would need 12 bags.

Christopher DuBois
GuestHow much concrete does it take to fill a 55 gallon drum?
As to how many bags....a 55 gallon drum filled clear to the top is actually closer to 60 gallons. And 60 gallons is 8 cu ft. So if you buy 60lb bags, those do 1/2 cu ft each so you would need 16 of them. IF you buy 80lb bags (2/3 cu ft) you would need 12 bags.

AbolfazlR
GuestHow much does 50 gallons of concrete weigh?
3/4 full would be about 5-1/2 cubic feet. Concrete can vary by the mix, of course, but it's pretty standard to figure 150 lbs/sq ft, or roughly 825 lbs.

KingDarBoja
GuestHow much does 55 gallon of concrete weigh?
There's 7.48 gallons per cubic foot, so there are approximately 7.35 cubit feet in a 55 gallon drum. 3/4 full would be about 5-1/2 cubic feet. Concrete can vary by the mix, of course, but it's pretty standard to figure 150 lbs/sq ft, or roughly 825 lbs.

stateMachine
GuestHow much does a 50 gallon drum of concrete weigh?
There's 7.48 gallons per cubic foot, so there are approximately 7.35 cubit feet in a 55 gallon drum. 3/4 full would be about 5-1/2 cubic feet. Concrete can vary by the mix, of course, but it's pretty standard to figure 150 lbs/sq ft, or roughly 825 lbs.

Mayur Gajra
GuestHow much does a 60 lb bag of concrete weigh mixed?
= 143.3 lbs / cu ft dry mix. Quikrete informs that an 80 lb bag of dry mix yields 0.60 cu ft of concrete. I use bags of Quikrete that yield 0.75 cu ft (thus 100 lbs /bag) each, for fence posts.

Pedro Rolo
GuestHow much concrete do I need for 10 sonotube?
For example, a sono tube with a 10" diameter and a 4' depth requires 0.08 cubic yards of concrete.

csgillespie
GuestHow much concrete do I need for an inground pool?
Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

vonPryz
GuestHow much is concrete for a house?
About 0.38 cement bag is used per sq ft of construction. So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home. Sand is not only required for preparing RCC, mortar and plaster but also used for filling and flooring too. Sand consumed is about 1200 cubic ft.

Ainar-G
GuestHow much does it cost to put cement in the backyard?
The typical concrete patio is approximately 288 sq ft and costs an average of $2,800 (about $9 per sq ft); depending on a variety of factors, your cost will likely fall between $1,300 and $5,100 ($3-$15 per sq ft)..

Malachi
GuestHow is plaster price calculated?
Subtotal material cost = cement cost + sand cost = 28 + 25 = INR 53. step 4 :- labour rate and charges:- labour rate and cost for internal wall plastering is INR 15 to 18 per sq ft or INR 161 to 193 per sq m, consider labour rate and cost in this calculation is INR 180 per sq meter. Total cost = 233 + 35 = INR 268.

Doug Sillars
GuestHow much does it cost to replace a plaster wall?
The cost to repair plaster on a wall averages $70 to $100 per sq. ft. The cost to repair sections of the ceiling averages $100 to $120 per sq. ft.

mkl
GuestHow much does an 80 lb bag of concrete weigh mixed?
= 143.3 lbs / cu ft dry mix. Quikrete informs that an 80 lb bag of dry mix yields 0.60 cu ft of concrete. I use bags of Quikrete that yield 0.75 cu ft (thus 100 lbs /bag) each, for fence posts. I add about 1.5 gallons of water to each such bag and mix in a wheelbarrow.

cyb3rZ
GuestHow much sand and cement do I need for plastering?
For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand). For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand). The thickness of plaster is between = 12 mm to 15 mm. Always use Good quality of cement (Different grades of cement) as well as good quality sand.

aminography
GuestHow much does it cost to redo concrete around a pool?
With the average pool deck in the US being 900 sq. ft. the total cost would range from $5,400 at the simplest end, to $13,500+ at the most detailed. Concrete can be installed quickly, and mimics the look of many other materials, such as natural stone, wood, brick and more.

Guillaume Vincent
GuestHow much concrete can you put in a 20 yard dumpster?
How much debris fits inside a 20-yard dumpster?Type of DebrisAmountRoofing2,000 - 2,800 sq. ft. (20 - 28 squares or 68 - 84 bundles)Concrete/Asphalt80 - 110 sq. ft. of 10-inch thick concrete/asphaltHousehold junk335 - 475 sq. ft. of general junk like clothes, furniture, trash, etc.3 more rows

Beta
GuestHow many bags of cement do I need for 1000 blocks?
3 bagsFor laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m.

TofuBeer
GuestHow much cement and sand do I need for floor tiles?
Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

Leftium
GuestHow many bags of cement do I need for 1 yard?
5 Bags# It takes approximately 5 Bags of Portland cement, 8 cubic ft of sand, and 20 cubic ft of gravel to make approximately 1 cubic yard (27 cubic feet) of concrete.

Sebin Sunny
GuestHow many bags of cement do I need for 100 square feet?
Ans.
:- 7.6 no of cement bags (381.30 kgs) are required for 100 sq ft rcc roof slab 4 inch thick m20 grade concrete.
Ans.
:- 7.6 bags (381.30 kgs), 9.5 bags (476.10 kgs) & 11.4 bags ( 570.8 kgs) cement are required for 100 sq ft rcc roof slab 4 inch, 5inch & 6 inch thick respectively in m20 grade of concrete..

Slava Fomin II
GuestHow much concrete do I need for a 20x20 pad?
Concrete Slab Prices By SizeSlab SizeSquare FeetAverage Cost Installed15x15225$1,38820x20400$2,46824x24576$3,55420x30600$3,7026 more rows

Paul Stephenson
GuestHow much does it cost to resurface a concrete pool deck?
Resurfacing also adds strength to your surface by covering and bonding any cracks in your deck. With resurfacing costs starting around $3 to $5 per sq. ft., placing an overlay on your pool deck could save you money and time.

helderdarocha
GuestHow much sand and cement do I need for 1000 bricks?
To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand. 1 Bag of cement to 3 wheelbarrows of building sand.

NSjonas
GuestHow much would it cost to extend a concrete patio?
Concrete Patio Cost - An Affordable Option The typical concrete patio is approximately 288 sq ft and costs an average of $2,800 (about $9 per sq ft); depending on a variety of factors, your cost will likely fall between $1,300 and $5,100 ($3-$15 per sq ft).

tscizzle
GuestHow do I figure out how much concrete I need for a round hole?
They are 4 feet in height and 10 inches in width (diameter), or 4′ x 10″.Choose Round Column (or Round Slab) on the calculator.Enter Height 4 ft (or 48 in)Enter Diameter 10 in.Calculate and the answer is 0.08 cubic yards for one concrete tube.Multiply 0.08 x 50 = 4 total cubic yards of concrete for 50 tubes.More items...

Peter B
GuestHow much concrete do I need for a 10 sonotube?
For example, a sono tube with a 10" diameter and a 4' depth requires 0.08 cubic yards of concrete.

womp
GuestHow do I calculate how much concrete I need?
Quantity of cement = 1/13 × 1.54 m3 × 1440 kg/m3 = 170 kg, no of bag cement for 1m3 m7. 5 concrete = 170/50 = 3.4. If rate of cement = INR 400 per bag, then cost of 3.4 bags cement = 3.4 ×400 = INR 1360.

Isac Moura
GuestHow do I figure out how many yards of concrete I need for a slab?
How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards.

Ramis
GuestHow do I figure out how many yards of concrete I need?
How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards..

Alex
GuestHow many bags of cement can lay 1000 blocks?
50 Bags50 Bags of Cement = 1000 Concrete Blocks.

Gary Willoughby
GuestHow many bags of cement do I need for 100 square feet of concrete?
Ans. :- 7.6 no of cement bags (381.30 kgs) are required for 100 sq ft rcc roof slab 4 inch thick m20 grade concrete. Ans. :- 7.6 bags (381.30 kgs), 9.5 bags (476.10 kgs) & 11.4 bags ( 570.8 kgs) cement are required for 100 sq ft rcc roof slab 4 inch, 5inch & 6 inch thick respectively in m20 grade of concrete.

mfulton26
GuestHow many bags of cement do I need for a 1000 sq ft slab?
400 bagsCement bags So, around 400 bags of cement (50kg each) are consumed for 1000 sq ft home.

Mark Elliot
GuestHow much does a 40x60 concrete slab cost?
40x60 Concrete Slab Cost: $4-6 per sq ft ($9,600 to $14,400) for the installation of a 6" concrete foundation.

bereket gebredingle
GuestHow much is concrete a sq ft?
A typical concrete slab costs $4 to $8 per square foot with most homeowners spending between $5.35 to $6.17 per square foot, or $113 to $126 per cubic yard for both materials and installation. Your final cost will depend on the slabs size, thickness, and if you any special reinforcement such as wire mesh or rebar.