Best answer

between 85mm and 100mm“Slab” issues that most often arise in disputes between builders and owners relate to the size of cracks that may appear, and the thickness of the concrete slab installed. In Western Australia the most common slab thickness is between 85mm and 100mm.

Answered by: Sjoerd Date created: Jun 25, 2022

How thick should my concrete slab be?

Asked By: Vivin Paliath Date created: Jun 12, 2022

4 inchesStandard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

Answered By: Peter Niederwieser Date created: Jun 12, 2022

How thick should plaster be on plasterboard?

Asked By: Timbus Calin Date created: Jun 20, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: Rutger Date created: Jun 21, 2022

How thick should a concrete slab be for a mobile home?

Asked By: steveo314 Date created: Jun 11, 2022

4 to 6 inches

Answered By: arno_v Date created: Jun 13, 2022

How thick does a concrete slab need to be for a garage?

Asked By: Prebiusta Date created: Jun 09, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: stefanB Date created: Jun 12, 2022

What is the minimum depth for a concrete slab?

Asked By: kapa Date created: Jun 12, 2022

5 cm thickWhatever you plan on doing, your concrete slab should be at least 5 cm thick. That is the bare minimum of a concrete slab thickness. This is the thickness of the concrete slab alone and it doesn't include the gravel base, if you are using something like that.

Answered By: prakash Date created: Jun 12, 2022

How thick should tile cement be?

Asked By: Daniel A.A. Pelsmaeker Date created: Jun 16, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: vitaliis Date created: Jun 16, 2022

How thick should a concrete slab be for a shed?

Asked By: Maurice Date created: Jun 17, 2022

Recommended Thickness of Concrete Slabs Shed Slabs: 3 1/2 inches thick. Shed floors that are being used for studio sheds or workshops will use a 3 1/2" thickness. Driveways: 4 inches, some areas require 5 inches. Many garage sheds need a driveway approaching the large shed door.

Answered By: fedorqui 'SO stop harming' Date created: Jun 18, 2022

How thick does a concrete slab need to be for a patio?

Asked By: Your Common Sense Date created: Jun 23, 2022

six (6) inchesIt is essential that you keep your concrete slab at no more than six (6) inches of thickness..

Answered By: Lalit Fauzdar Date created: Jun 24, 2022

How thick should a concrete driveway be?

Asked By: Cody Gray Date created: Jun 16, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: adem caglin Date created: Jun 17, 2022

How much would a 40x60 concrete slab cost?

Asked By: ereOn Date created: Jun 22, 2022

How much does a 40×60 concrete slab cost? It would be about $8,500 to $12,000 for a 40×60 foot concrete slab, 6 inches thick. That's based on national averages of around $5 per square foot for a fully engineered, finished concrete slab, including labor and materials.

Answered By: Yash Maheshwari Date created: Jun 23, 2022

Related Question Answers

GibboK

Professor

How thick should a cement driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

cartant

Professor

Can a concrete slab be too thick?

If the slab is too thin, it may break under load and fail before its time. If the slab is too thick, it costs more than it should. Slab thickness is a major factor in the cost of a concrete floor, so there's often pressure, which can become intense, to make the slab as thin as possible.

warren

Professor

How thick should a concrete slab be for a basketball court?

3500 PSIBase Material Many basketball courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance.

Dan Lenski

Professor

How thick does the concrete need to be for a car lift?

100mmThe minimum and recommended thicknesses of concrete slab for car hoists. Garage Equipment's two and four post hoists require a minimum of 100mm (about 4”) of reinforced concrete slab to be safely installed.

Radek 'Goblin' Pieczonka

Professor

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

SNM

Professional

How thick should a concrete slab be for a shop?

Five to six inchesFive to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks.

To prepare the base, cut the ground level to the proper depth to allow for the slab thickness..

Thomas Uhrig

Professional

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

Tom Christie

Professional

How much insulation do I need under a concrete floor?

A 50mm thick layer of proprietary floor slab insulation is usually enough to reach and maintain the target U value but this should be checked with an architect first. Insulation sheets should be laid tightly together with the joints staggered to avoid movement.

t_dom93

User

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

Dai

User

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

geotheory

User

How thick should concrete be for 2 post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience. Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.

Édouard Lopez

Guest

How thick should concrete resurfacer be?

1/2 inchUnlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

kender

Guest

How thick should my concrete driveway be?

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Hussein

Guest

How much does a concrete driveway cost Australia?

How much does a concrete driveway cost? Like the cars that are parked on them, driveways can come in all shapes, sizes and standards. But as a general estimate, you can expect to pay around $1,500 to $3,500 to add a standard-sized concrete driveway to a residential property in Australia.

aborilov

Guest

How thick does a concrete garage floor need to be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it.

Building codes offer requirements for the concrete mix, which vary by region.

The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix..

Daniel Ruoso

Guest

How thick does a concrete slab for a shed need to be?

4-inchA 4-inch slab is generally a good thickness for a typical shed. This concrete floor can be poured in most locales on a 4-inch base of compacted gravel. That requires an excavation of at least 6 inches to make a slab that will be 2 inches above the surrounding ground.

Pablo Barrera

Guest

How thick does a concrete slab need to be?

six (6) inchesIt is essential that you keep your concrete slab at no more than six (6) inches of thickness. Also, it would be best to work the numbers out if you wish to work with any lesser as you can only put in one slab.

wsl

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

Roman Pavelka

Guest

How thick should a concrete pool deck be?

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

Alik

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

Daniel Vérité

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

CristiFati

Guest

How thick should a reinforced concrete driveway be?

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

Arturo Sbr

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

yojimbo87

Guest

How many inches of concrete do I need for a garage?

fourThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Agnel Kurian

Guest

How much does it cost to plaster a room Australia?

Plastering services in Australia cost around $45/hr on average in 2017. The specifics of the project can affect the overall cost, though. Basic plastering jobs can cost as low as $44.50/hr. However, if the job involves removing old plaster or adding decorative finishes, you can be charged up to $50/hr.

Lior Bar-On

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Chris Jester-Young

Guest

How thick should a concrete porch be?

4 inchesWe generally try to maintain a minimum thickness of any slab at 4 inches, if the patio will have heavy features added on it, you may want to thicken it to 6 or even 8 inches, at least under the area where the feature will be added..

Shyju M

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Eugene M

Guest

How thick should concrete floor insulation be?

Designers generally insulate both directly under the slab and around the perimeter as well. In cold climates it is advisable to use a minimum of 2 inches of extruded polystyrene under the slab. Many increase the under-slab insulating foam board thickness to 3 or 4 inches at the outer 2 to 4 feet of the slab.

StephenKing

Guest

How thick should concrete overlay be?

25 to 50 mmThe minimum recommended thickness is 1 to 2 in. (25 to 50 mm) for a fully bonded concrete overlay placed on a base slab that is practically free of cracks and in which the concrete is sound, clean, and of good quality.

perreal

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.

Timothy Rylatt

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

Jayson Minard

Guest

How big can a concrete slab be without expansion joints?

Usually, expansion joints should be no farther apart than 2 to 3 times (in feet) the total width of the concrete (in inches). So for a 4 inch thick concrete slab, expansion joints should be no more than 8 to 12 feet apart.

homerun

Guest

How do you make cement blocks?

To mix the concrete you should spread the sand out on a concrete slab or a steel plate. The sand must be 5cm to 10cm thick. Spread the cement over the sand and add aggregates. Use a shovel to mix the sand and cement until a uniform colour is achieved.

Vinujan.S

Guest

How thick is a concrete driveway?

75-100mmConcrete paths should be 75-100mm thick, whereas drives, garage bases or hardstandings should be at least 100mm thick. For heavier use, such as large vans, use a 150-200mm thick concrete slab.

Fabio

Guest

How thick should a concrete driveway be NZ?

100 mmHow thick should a concrete driveway be laid to.

A minimum of 100 mm is recommended.

Thickness is a major factor in determining the driveway's structural capacity..

Shaded

Guest

How thick should a concrete garage floor be?

Standard Thickness The standard concrete garage floor is six inches thick and, with use of proper control joints, should be thick enough to withstand normal use.

Michal Foksa

Guest

How thick should a concrete shower pan be?

Thickness for Concrete Shower Pan – Base Layer The shower pan base mortar layer thickness should be approximately ½ to 1 inch thick. Since the shower floor already has a pre-slope, just apply a base mortar layer that has an even thickness throughout the shower floor area.

jaspreet chahal

Guest

How thick should a concrete sunroom be?

Four inches is the minimum thickness for a concrete patio.

You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub..

laalto

Guest

How thick should a load bearing concrete wall be?

Therefore I recommend that all the walls should be at least 9 inch thick. 4.5-inch thick walls are not structurally safe if they are beyond 7 feet in height or carry some imposed load.

Joseph Mansfield

Guest

How thick should a stamped concrete patio be?

four inchesHow thick is stamped concrete? Our standard slab is a minimum of four inches. Some situations will require us to pour six inches of concrete, and this would be discussed before the project takes place.

Nabin

Guest

How much crushed stone do I need under concrete slab?

3 inchesYou will need 3 inches of gravel under a concrete slab that is 4 inches thick. More gravel is better, but 3 inches is the minimum amount of gravel you should have with a 4” slab. Use ¾” washed and screened gravel, then compact it to level.

David L. Walsh

Guest

Where is cement made in Australia?

Where is Cement Produced in Australia? There are five integrated manufacturing facilities in Australia operated by CIF member companies – Adelaide Brighton, Boral Cement and Cement Australia.