Best answer

1 Answer. You don't have to use a backerboard on shower ceilings - especially if you aren't tiling it. You can drywall it. If you do use a backer board I would suggest Hardieboard.

Answered by: Pero P. Date created: Jun 24, 2022

Do I need a vapor barrier behind cement board in shower?

Asked By: totymedli Date created: Jun 10, 2022

Moisture barriers stop that water or vapor from getting any farther and potentially rotting your studs, the drywall or greenboard installed behind the enclosure. They are required beneath your shower pan and behind your shower walls.

Answered By: Chris Date created: Jun 12, 2022

Do you need to waterproof cement board before tiling?

Asked By: Mathletics Date created: Jun 21, 2022

So, if you're looking for durability and strength, concrete backer-board will probably be your choice. First, you should provide a waterproof/resistant membrane against the wood studs before installing the concrete backer-board to protect the wood studs from moisture absorbed through the backer-board.

Answered By: Eric Postpischil Date created: Jun 24, 2022

Do you have to waterproof cement board?

Asked By: TLindig Date created: Jun 14, 2022

Most concrete backer-boards on the market today are not water-resistant, but all are waterproof. Since many people confuse the terms, it is a common misconception that this is the best material for use inside a shower or tub area.

Answered By: Jan Peša Date created: Jun 14, 2022

Do you need to prime cement board before tiling?

Asked By: Rion Williams Date created: Jun 10, 2022

Do I need to prime HardieBacker® board before I tile onto it? No. HardieBacker tile backerboard is ready to tile once installed, just wipe down with a damp sponge to remove any dust prior to tiling.

Answered By: Dali Hamza Date created: Jun 13, 2022

Do you plaster ceiling or walls first?

Asked By: Taneenene Date created: Jun 09, 2022

If you're working on ceilings and walls, always start with the ceiling, starting in the left corner. Run your trowel back and forth, applying your plaster in a straight line.

Answered By: Henk Holterman Date created: Jun 12, 2022

Can you paint cement board in shower?

Asked By: dtech Date created: Jun 10, 2022

Can you paint cement board in shower? Not likely. but Hardie backer board's official installation tutorial says it can be finish with paint. Use the backer board on the tiled part, and use the moisture resistant drywall on the rest.

Answered By: Oliver Charlesworth Date created: Jun 13, 2022

Can cement tiles be used in a shower?

Asked By: Quentin Date created: Jun 13, 2022

The most common question is, "Can I use them in my shower or bath?" The answer is definitely, "Yes!" Cement tiles can also be used in wet areas such as the bathroom floor, shower floor, shower wall, steam room or sauna. ... However, do not confuse encaustic cement tile with encaustic tile.

Answered By: Cool Cloud Date created: Jun 16, 2022

Do you have to use thinset under cement board?

Asked By: Atif Mahmood Date created: Jun 11, 2022

No Thinset underneath the backer board “The thinset goes ON TOP of the cement board to stick the tiles!” ... Cement board is a different product and it needs to be installed in its own way. Additionally, screws don't take the place of thinset either.

Answered By: aleroot Date created: Jun 11, 2022

Do you need to waterproof cement board in a shower?

Asked By: atomh33ls Date created: Jun 16, 2022

Cement board is not waterproof. Hardibacker is not waterproof. Tile and grout are not waterproof. Cement board will not fall apart when exposed to water.

Answered By: Paul Morgan Date created: Jun 18, 2022

Do I need to waterproof cement board in shower?

Asked By: Todd A. Jacobs Date created: Jun 11, 2022

Here's what the TCNA handbook has to say about the matter: “A waterproof membrane or vapor retarder membrane must be specified to prevent moisture intrusion and protect adjacent building materials.” ~B412 Bathtub or shower with prefabricated receptor. Cement board or Fiber-cement board.

Answered By: Alexis Olson Date created: Jun 14, 2022

Related Question Answers

Steef

Professor

Can you use cement tiles in a shower?

The most common question is, "Can I use them in my shower or bath?" The answer is definitely, "Yes!" Cement tiles can also be used in wet areas such as the bathroom floor, shower floor, shower wall, steam room or sauna.

...

However, do not confuse encaustic cement tile with encaustic tile..

Tonnie

Professor

Do you need plastic behind cement board?

Their online instructions/diagrams show no use of a vapor barrier. You should, so that any moisture that gets behind the cement board runs into the tub or shower instead of into your wall cavity (causing rot or mold/mildew).

JustCarty

Professor

Do you need a vapor barrier behind cement board?

You still need a vapor barrier with cement board, although in this case the barrier can go behind the board. Cement board is heavy enough and breathable enough to take the moisture without a problem. By having the vapor barrier behind the cement board you stop the moisture going further into the wall.

blade

Professor

Do you need green board behind cement board?

Because cement board can be used either for floors or walls, the surface below the cement board will vary: ... In such wet areas, never install cement board directly over drywall or green board. Instead, first, remove the existing surface material, then install the cement board over the studs and membrane, as applicable.

nickelpro

Professor

What do you put behind cement board in shower?

Cement Board and a Liquid Membrane No plastic sheeting goes behind the cement board.

A liquid waterproofing membrane, such as RedGard or Hydro Ban, is applied to the cement board and allowed to cure.

Then, tile is installed over the membrane..

Camilo Terevinto

Professional

How do you hang something on a concrete ceiling without drilling?

If you're installing a suspended ceiling, a hanging partition or track lights to a concrete ceiling, you can avoid drilling for wedge anchors and go with angle clips and pins. The clips have predrilled holes for bolts or hanger wires and attach to the concrete using a powder-actuated tool.

Laurent Perron

Professional

Is backer board the same as cement board?

Cement backer board is also called cement board, and it's the most commonly used backer board for all manner of ceramic and porcelain tiles. Made of cement and reinforced on the top and bottom with fiberglass, this waterproof backer board is generally used for tiled shower surrounds and floors in wet areas.

Eric

Professional

Can you use cement board in a shower?

In showers, the standard substrate is tile backer, also called cement board or cement backer board. Ceramic and porcelain tile, more than almost any other surface material, needs a stable, flat, flex-free substrate. Even the slightest amount of movement in a building structure can telegraph to the tile and crack it.

Peter Niederwieser

Professional

Do you put cement board under a shower pan?

Once the subfloor of proper thickness is properly installed then you can apply cement board directly to the subfloor material. ALL CEMENT BOARDS MUST be installed in a fresh bed of thinset. ... If you want the cement board under the shower tray then do so - doesn't matter.

rogerdpack

Professional

Do you need to waterproof concrete bathroom floor?

If the bathroom floor is either concrete or compressed fibre cement sheet flooring then there is no requirement for full waterproofing of the floor and the extent of floor waterproofing will depend on whether it has a bath with a shower over it or the shower recess is enclosed with a shower screen.

Spatz

User

Can I plaster my ceiling myself?

In order to plaster your ceiling properly, you will need to learn how to skim a ceiling with plaster. ... To skim a ceiling with plaster, first, dab some clean water on the ceiling where you plan to apply the plaster. Then add a small amount of plaster to the edge of your plastering trowel to create a thin, even layer.

Casimir Crystal

User

Can you plaster part of a ceiling?

In order to plaster your ceiling properly, you will need to learn how to skim a ceiling with plaster.

To skim a ceiling with plaster, first, dab some clean water on the ceiling where you plan to apply the plaster.

Then add a small amount of plaster to the edge of your plastering trowel to create a thin, even layer.

Jo Liss

User

How do you apply plaster to a ceiling?

It is important to make safety a top priority. To skim a ceiling with plaster, first, dab some clean water on the ceiling where you plan to apply the plaster. Then add a small amount of plaster to the edge of your plastering trowel to create a thin, even layer.

Aziza Kasenova

User

Can you use 1/4 inch cement board walls?

1/4" Durock cement board should not be used for wall or ceiling applications. For wall or ceiling applications, use 1/2" or 5/8" Durock cement board. If you have 3/8" sheetrock, use 1/2" cement board and feather out the joint to approx 10" to 12". It should be almost unnoticeable if done right.

Moon

Guest

Can you use cement board for shower walls?

Cement Board and a Sheet Membrane Kerdi can also be installed directly over standard drywall in a shower because, when installed correctly, it creates a continuous waterproof barrier..

Rodrigo Rodrigues

Guest

Do I need a shower pan on concrete floor?

You will have to ensure that there is no wax, oil, grease, or soap scum on the face of the concrete slab that could ruin or reduce the bond. After that, I recommend that you install a sloped shower pan to contain the shower water and prevent harmful organisms from becoming resident in the surrounding walls and floor.

Misha Moroshko

Guest

Do I need to prime cement board before tiling?

Do I need to prime HardieBacker® board before I tile onto it? No. HardieBacker tile backerboard is ready to tile once installed, just wipe down with a damp sponge to remove any dust prior to tiling.

Kaushik Ghosh

Guest

Do you have to replace cement board under tile?

Undamaged cement backer board does not need to be replaced.

...

It is difficult to remove tile from a cement backer board, and even more difficult to avoid damaging the board in the process.

Since backer board is relatively inexpensive, it's not normally worth the time and labor it would take to remove the tile to save it..

Luis Mendo

Guest

Do you have to seal cement board in a tile shower?

Although most backerboards currently available won't fall apart when exposed to moisture and are somewhat water-resistant, they aren't waterproof.

To prevent moisture from seeping through to the wood or metal studs beneath the tile, a barrier or sealant must be used on porous materials..

Make42

Guest

Do you have to waterproof a concrete bathroom floor?

If the bathroom floor is either concrete or compressed fibre cement sheet flooring then there is no requirement for full waterproofing of the floor and the extent of floor waterproofing will depend on whether it has a bath with a shower over it or the shower recess is enclosed with a shower screen.

sebaferreras

Guest

Do you install cement board before shower pan?

The wallboard must be installed 1/8 inch above the shower pan. If the shower pan is not in place, the wallboard height must be guessed, which can lead to inaccuracies and an expansion gap that is too large or too small.

anthony_718

Guest

Do you need a shower pan liner on concrete floor?

JRC3 Member. It will need to be lined or it will wick into the slab and studding. The liner also makes the walls around the pan water-tight, that's why the liner normally goes up at least 3" above the pan behind the tile and backer material.

Emile Cormier

Guest

Do you need plywood under cement board?

The Surface Below the Cement Board Flooring: For ceramic tile floors, the cement board usually rests on a plywood subfloor (minimum 5/8-inch-thick exterior-grade plywood or OSB). ... In such wet areas, never install cement board directly over drywall or green board.

drinchev

Guest

Do you need Thinset under cement board?

Not only is thinset a critical component underneath cement board but the other critical component is the fasteners.

And you won't have the fasteners if you are trying to install it over concrete..

Lagerbaer

Guest

Does cement board need to be sealed?

While you don't always need to seal backer board, it sometimes make sense to do so. If you are installing backer board in an area that will be subject to a great amount of moisture, like in a shower, then it makes sense to put a waterproofing sealer on it.

Libbaaaa

Guest

Do I need cement board for kitchen backsplash?

But for a tile backsplash, if your wall is good and plumb, without any major ridges or problems, you don't always need to use a backer board, often you can just apply thinset to the walls and put your tiles in place.

Assaf Lavie

Guest

Does cement board in shower need waterproofing?

“A waterproof membrane or vapor retarder membrane must be specified to prevent moisture intrusion and protect adjacent building materials.” ~B412 Bathtub or shower with prefabricated receptor. Cement board or Fiber-cement board. Ceramic Tile. ... Consult local building code for moisture barrier requirements.”

Pierre

Guest

Can you use 1/4 cement board on floors?

Both 1/4- and1/2-inch cement board are appropriate for floors. To install cement board on floors, cement board manufacturers mandate a 5/8-inch plywood subfloor or OSB underlayment.

np8

Guest

Do I need plywood under cement board?

Because cement board can be used either for floors or walls, the surface below the cement board will vary: Flooring: For ceramic tile floors, the cement board usually rests on a plywood subfloor (minimum 5/8-inch-thick exterior-grade plywood or OSB).

Michal Foksa

Guest

Should you put a vapor barrier behind cement board?

You still need a vapor barrier with cement board, although in this case the barrier can go behind the board. Cement board is heavy enough and breathable enough to take the moisture without a problem. By having the vapor barrier behind the cement board you stop the moisture going further into the wall.

Andrew Shepherd

Guest

What do you put on seams of cement board?

Use special mesh tape on seams Cut drywall to fill in between the existing wall or ceiling and the cement board. Screw the drywall to the studs. Cover all of the corners, joints and seams, including the joint where drywall and cement board meet, with the fiberglass mesh tape.

Brennan

Guest

Is Durock cement board non-combustible?

This DUROCK® cement board is a non-combustible, water and mold-resistant panel designed for use under tile, in shower areas, and readily applied over ...

Ray

Guest

Do I need cement board for shower ceiling?

It can be, but it's not really necessary. You can tile directly to drywall in any dry area. If your doors go all the way to the ceiling, you might consider cbu verses any kind of drywall on the ceiling, otherwise, it is considered a dry area.

Lakshman Prasad

Guest

Can you caulk cement board in shower?

In the event the caulk seal between the bottom row of tile and the tub/shower fails, water can get behind the tile. If the backer board is touching this ledge, it will readily soak up this water like a sponge. ... Then, before installing the tile, apply a bead of pure silicone caulk between the backer board and the ledge.

rbaldwin

Guest

What kind of cement do you use for a shower pan?

Floor Mud QUIKRETEQUIKRETE® Floor Mud (No. 1548-81) is a Portland cement based underlayment mortar designed for leveling travertine, slate and marble floor tile, and for shower pan applications.

Omnifarious

Guest

Where do you put cement board in a bathroom?

Cement backer board is mainly used as a sub-surface for tiling. Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete.

ecatmur

Guest

What kind of paint do you use on cement board?

Acrylic paintFor cement boards that have already been primed, 100% acrylic exterior paint is recommended. Acrylic paint is the best choice for cement board. It's especially important if you are working with new cement board to avoid oil-based primer.

Alex Howansky

Guest

Do you have to put cement board under tile?

In short, tile and grout are not inherently waterproof. ... Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete.

Alex

Guest

Do you need to use thinset under cement board?

Not only is thinset a critical component underneath cement board but the other critical component is the fasteners. And you won't have the fasteners if you are trying to install it over concrete.

Alexey Soshin

Guest

How high should cement board be in shower?

Start installing your boards a quarter inch above the floor, tub, or shower board and caulk accordingly. 2. Fasten cement board with specified nails or screws, a maximum of 8” on center at all supports.

Levi Fuller

Guest

How many bags of cement do I need for a shower pan?

Building a mud shower is really hard work. This one required 300 lbs (dry) of cement and sand. Another 300 lbs of cement board for the walls. More hundreds of lbs of tile, thinset and grout.

TheJim01

Guest

How many bags of plaster do I need for a room?

Well if you go by the spec a bag of Multi and Board finish will cover 10.25-75 m2 at a coverage of 2mm on Plaster board. As the manufacturer will tell you this is, of course, just a guide.

Alireza Ahmadi

Guest

What is better cement board or backer board?

Cement board is the most common and widely-known backer board. ... On the downside, the cement boards are heavy, somewhat difficult to cut and can leave abrasive sandy crumbs that can damage tubs and shower bases if you're not careful. Cement board is a good, reliable backer board that works well on both floors and walls.