Best answer

For example, a sono tube with a 10" diameter and a 4' depth requires 0.08 cubic yards of concrete..

Answered by: LF00 Date created: Jun 22, 2022

How many bags of concrete do I need for a 4x8 slab?

Asked By: sathishk2030 Date created: Jun 15, 2022

Your project is 32 square feet at a depth of 4”. Here is the quantity that you will need for your slab. Quikrete Concrete Mix: 24- 60lb bags.

Answered By: Shubham Date created: Jun 15, 2022

How many bags of concrete do I need for a post hole?

Asked By: Adam Hughes Date created: Jun 11, 2022

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 - 48 hours.

Answered By: Milan Babuškov Date created: Jun 14, 2022

How do I calculate how much plaster I need?

Asked By: gerrit Date created: Jun 11, 2022

For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand). For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand). The thickness of plaster is between = 12 mm to 15 mm. Always use Good quality of cement (Different grades of cement) as well as good quality sand.

Answered By: troelskn Date created: Jun 11, 2022

How much concrete do I need for a deck post?

Asked By: Albert Date created: Jun 17, 2022

One 80-lb bag of concrete yields . 60 cubic feet when combined with 4 quarts of water. If you're purchasing 80-lb bags of concrete, you'll need 1.66 bags of concrete. As before, since bags of concrete are only sold in whole quantities, you'll need to purchase two (2) 60-lb.

Answered By: Squiddleton Date created: Jun 18, 2022

How much sand and cement do I need for brickwork?

Asked By: MatsLindh Date created: Jun 13, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: BenMorel Date created: Jun 13, 2022

How many bags of concrete do I need for a 4x4 pad?

Asked By: Mr_Green Date created: Jun 14, 2022

The calculator will indicate the number of 60 or 80 pound bags of QUIKRETE® Concrete Mix you need to build a 4″ or a 6″ slab.

Answered By: kpimov Date created: Jun 16, 2022

How much cement do I need for a brick wall?

Asked By: Ryan McGeary Date created: Jun 19, 2022

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Answered By: blueberryfields Date created: Jun 21, 2022

How many concrete blocks do I need for a foundation?

Asked By: Lance Pollard Date created: Jun 17, 2022

Concrete blocks are concrete masonry units, or CMUs, but we often refer to them as concrete blocks or cinder blocks Learn more about concrete masonry units. A wall typically requires 1 1/8 blocks per square foot.

Answered By: azerafati Date created: Jun 17, 2022

How many bags of concrete do I need for a 3 foot post hole?

Asked By: Lily Ballard Date created: Jun 14, 2022

I normally use post hole diggers (6" diameter?) 3 feet deep and ½ a bag of redi-mix per post.

Answered By: sendon1982 Date created: Jun 14, 2022

How many bags of concrete do I need for a 8x8 slab?

Asked By: Robert Sandberg Date created: Jun 22, 2022

How many concrete bags would I need for a 8 ft x 8 ft x 6" slab? 54 x 80lb Concrete bags. How much does it cost to pour a 8'x8' x6" slab? Ready-mix costs approx $277.86.

Answered By: François Romain Date created: Jun 25, 2022

Related Question Answers

Tha'er M. Al-Ajlouni

Professor

How do you calculate concrete for a fence?

You need to find out how much fencing you need in linear foot or linear meter and multiply that amount with the fence height pricing you want. For example, if you require 150 linear foot worth of 6 feet high concrete fence. Your material estimate will be 150 x $40 = $6000.

Chase DeAnda

Professor

How much does it cost to pour a 24x24 concrete slab?

A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete..

Stefan Steiger

Professor

How do I work out how much plaster I need?

For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand).

For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand).

The thickness of plaster is between = 12 mm to 15 mm.

Always use Good quality of cement (Different grades of cement) as well as good quality sand..

codependent

Professional

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

Olical

Professional

How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

zaph

Professional

How much does it cost to get a slab of concrete poured?

Concrete slabs typically cost about $6 per square foot, or between $4 and $8 per square foot including labor. That's about $5,400, or between $3,600 and $7,200 for a typical 30- by 30-foot slab that's 6 inches deep. Materials alone cost about $4 per cubic foot.

Jacob Gabrielson

Professional

How long does it take for sonotube cement to dry?

24 hoursUsually 24 hours, but concrete masonry specifications will dictate. Maximum recommended time before stripping is five days. Does the Sonotube form have to be stripped from the column after the concrete has cured?

LinusGeffarth

User

How much concrete do I need for 6x6 post?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground. The diameter of your post hole should be three times the diameter of your post.

Akavall

User

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

ForceBru

User

How much concrete do I need for deck footings?

In order to have enough concrete for one cubic foot, you'll require 2.2 bags of 60-lb concrete.

Since bags are only sold in whole (not half, or quarter) quantities, you'll need to purchase three (3) 60-lb.

bags for one cubic foot..

Nabin

Guest

How much rebar do I need for a concrete wall?

Rebar is placed horizontally and vertically in the wall, in a grid pattern. As a minimum, #4 rebar (1/2 inch) is spaced vertically at 36 inches on center, continued to within 8 inches of the top of the wall, placed on the tension side -- the inside face -- of the wall.

Svante

Guest

How much does a concrete carport cost?

The cost of a concrete slab averages between $4 and $8 per square foot. Expect to pay at least $1,500 for a 12x20 foot, one-car carport. Many carports are built on a concrete slab, which includes piers.

Anthony Kong

Guest

How much do precast concrete blocks cost?

How much do precast concrete panels cost? Precast panel costs depend on the manufacturer, but you can expect to spend at least $20 per square foot for a 200-square foot panel. Due to economies of scale, a 100-square foot panel is often more expensive at $30 per square foot.

Paulo Schau Guerra

Guest

How much does 4 inches of concrete weigh?

5 feet and you get 75 pounds for a square foot of concrete that's 6 inches thick. How much does a 4" thick square foot of concrete weigh? 4 / 12 = . 333 150 lbs X .

Andrey

Guest

How much cement do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Viktor Kerkez

Guest

How much sand and cement do I need for plastering?

For wall plaster generally ratio we use = 1: 6 (1 part of cement and 6 part of sand). For Roof plaster mainly ratio we use = 1: 4 (1 part of cement and 4 part of sand). The thickness of plaster is between = 12 mm to 15 mm. Always use Good quality of cement (Different grades of cement) as well as good quality sand.

Marcin Kunert

Guest

How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

A. K.

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Ken White

Guest

How much concrete do I need Home Depot?

Each 80-pound bag of QUIKRETE(r) Concrete Mix will yield approximately 0.6 cubic feet of concrete. For a 10' by 10' slab at 4" thick, you will need 33-1/3 cubic feet of concrete, or 56 80-pound bags. Yields are approximate and will vary with waste, uneven subgrade, etc.

lonesomeday

Guest

How many bags of concrete do I need for a 10x10 slab 4 inches thick?

The volume of concrete required for a 10- by 10-foot slab depends on the diameter of the slab.

For a 4-inch slab, either eight 60-pound or six 80-pound bags are required, while for a 6-inch slab, either 12 60-pound or nine 80-pound bags are necessary..

Anshul Goyal

Guest

How many bags of concrete do I need for a 10x12 slab?

The volume of concrete required for a 10- by 10-foot slab depends on the diameter of the slab. For a 4-inch slab, either eight 60-pound or six 80-pound bags are required, while for a 6-inch slab, either 12 60-pound or nine 80-pound bags are necessary.

Muhammad Maqsoodur Rehman

Guest

How much concrete do I need for a 40x60 slab?

The use determines the thickness. So if you take the surface area and multiply it by the thickness you will get the volume. Ie. 40 feet × 60 feet × 1 foot thick would be 2400 cubic feet of concrete divide by 27 to get cubic yards 2400÷27= 88.889.

Venkatesh Talacheeru

Guest

How much concrete sealer do I need?

Apply the Sealant Depending on how porous your concrete is, a gallon of sealer will cover 250 to 500 square feet.

kjhughes

Guest

How much does it cost for a 24x24 concrete slab?

A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

e.James

Guest

How much does it cost for a concrete garage floor?

Concrete slabs typically cost about $6 per square foot, or between $4 and $8 per square foot including labor. That's about $5,400, or between $3,600 and $7,200 for a typical 30- by 30-foot slab that's 6 inches deep. Materials alone cost about $4 per cubic foot.

Benjamin Gruenbaum

Guest

How much is a 24x24 concrete slab?

A typical 24x24 garage slab costs between $3,057 and $5,944 with prices ranging from $5.31 to $8.31 per square foot for a 4” reinforced slab of concrete, and $6.83 to $10.32 per square foot for a 6” slab of reinforced concrete.

Diogo Rocha

Guest

How much sand and cement do I need for rendering?

Sand and cement render is made by mixing 4 parts sand with 1 part cement and is applied to the substrate at a depth of about 10mm – 15mm. The problem with sand and cement render is that it has no give and no flexibility.

ypercubeᵀᴹ

Guest

How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly $6 to $11 per 100 square feet, considering you'll need $2 to $3 for pre-mixed joint compound, $0.10 to $0.50 for latex colorant, and $4 to $7 for tinted glaze.

Andrei Tătar

Guest

How much would it cost to cement my backyard?

Install a Cement Patio national average costcost to install a cement patioNational Avg. Materials Cost per square foot$1.76National Avg. Cost (labor and materials) for 120 square foot$1,042.74National Cost Range (labor and materials) for 120 square foot$934.55 - $1,150.93Apr 4, 2021

Brian Willis

Guest

How do I figure out how much concrete I need for a round hole?

They are 4 feet in height and 10 inches in width (diameter), or 4′ x 10″.Choose Round Column (or Round Slab) on the calculator.Enter Height 4 ft (or 48 in)Enter Diameter 10 in.Calculate and the answer is 0.08 cubic yards for one concrete tube.Multiply 0.08 x 50 = 4 total cubic yards of concrete for 50 tubes.More items...

vals

Guest

How much does a 60 lb bag of concrete make?

Each 60-pound bag of QUIRKETE® Concrete Mix yields approximately 0.45 cubic feet. To pour a 1 square foot slab 4” high, you will need 0.33 cubic feet of concrete, or 1 60-pound bag.

kostja

Guest

How much does it cost to pour a concrete pad?

On average, a concrete slab cost about $6 per square foot with labor. Including labor, the cost of a concrete pad can range between $4 and $8 per square foot. The average concrete pad measures around 30 feet by 30 feet. They're also 4 to 6 inches deep.

tscizzle

Guest

How much is a concrete slab per square foot?

A slab of concrete typically costs about $4 per square foot for materials. On average, a concrete slab cost about $6 per square foot with labor. Including labor, the cost of a concrete pad can range between $4 and $8 per square foot.