Best answer

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

Answered by: Manohar Date created: Jun 23, 2022

How many bags of cement do I need for a 10x10 slab?

Asked By: Trent Date created: Jun 19, 2022

For a 10 x 10 slab, you would need 77 60-pound bags or 60 80-pound bags. If we add an extra 10%, that's an extra 8 60-pound bags or 6 80-pound bags.

Answered By: Maurice Date created: Jun 22, 2022

How many bags of concrete do I need for a 6x6 slab?

Asked By: unutbu Date created: Jun 16, 2022

0.667 cu. yds. How many concrete bags would I need for a 6 ft x 6 ft x 6" slab? 29.9 x 80lb Concrete bags.

Answered By: Boann Date created: Jun 16, 2022

How do I calculate how much concrete I need for a slab?

Asked By: Hackinet Date created: Jun 25, 2022

CONCRETE CALCULATOR FORMULADetermine how thick you want the concrete.Measure the length and width that you'd like to cover.Multiply the length by the width to determine square footage.Convert the thickness from inches to feet.Multiply the thickness in feet by the square footage to determine cubic feet.More items...•

Answered By: Sebastian Krysmanski Date created: Jun 28, 2022

How much concrete do I need for a 12x20 slab?

Asked By: Fredrik Pihl Date created: Jun 16, 2022

Concrete Extras With a brief look, a 12x20 area at 6 inches deep, you would need approximately 6.31 tons or 4.44 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

Answered By: Arseni Mourzenko Date created: Jun 16, 2022

How many bags of concrete do I need for a 6x6 post?

Asked By: andrew cooke Date created: Jun 17, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: vacawama Date created: Jun 20, 2022

How much sand and cement do I need for brickwork?

Asked By: drubb Date created: Jun 24, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: radtek Date created: Jun 24, 2022

Can you concrete over sewage pipes?

Asked By: sev Date created: Jun 11, 2022

In most instances, yes, providing the sewer pipe has sufficient depth to allow an in-ground pool to be constructed over it. You will be required to concrete encase the sewer pipe, and if the pool is of concrete construction, you may need to have concrete piering under the base of the pool.

Answered By: Chase Florell Date created: Jun 14, 2022

How much cement do I need for a brick wall?

Asked By: Somnath Muluk Date created: Jun 23, 2022

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Answered By: Juanma Menendez Date created: Jun 24, 2022

How much sand and cement do I need for 100 blocks?

Asked By: adiga Date created: Jun 13, 2022

You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Answered By: Pரதீப் Date created: Jun 16, 2022

How much sand and cement do I need for 1000 blocks?

Asked By: quux00 Date created: Jun 24, 2022

For laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.

Answered By: David Schmitt Date created: Jun 27, 2022

Related Question Answers

Aniket Thakur

Professor

How much sand and cement do I need for blocks?

For every m2 of wall you will need ten concrete blocks. For every ten blocks you will need two 25kg bags of bricklaying mortar. If you are working on a larger project it may be more economical to mix your own mortar. For bricklaying you need to mix one part of cement to five parts building sand.

Davide Lorenzo MARINO

Professor

How much concrete do I need for a 4x4 fence post?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Işık Kaplan

Professor

Is it OK to drain a concrete pool?

In general, draining this type of pool is the trickiest. Inground pools made of concrete or gunite are susceptible to popping out of the ground if drainage is not done properly. If there has been a surplus of rain recently or your pool is located in a wet area, it is best not to try and drain the pool yourself at all.

Brandon

Professional

How do I fix my concrete pool?

Pool concrete repair: How to fix a cracked poolInject epoxy or polyurethane into the crack to seal it off.Apply hydraulic cement over the crack.“Staple” the crack closed with rebar staples.Tear out and redo the damaged area of the pool..

Darren Cook

Professional

How do you take care of a concrete pool?

Special Care for Concrete Pools Besides maintaining a constant balance of chemicals in your water, you will need to keep the concrete itself clean. The best way to do that is by simply brushing the walls. You can use a hard bristled brush attached to a telescopic pole to brush the walls and floor of your pool.

guettli

Professional

How long do concrete inground pools last?

50 yearsHow Long Will a Concrete Pool Last? A concrete pool should last decades (we're talking 50 years or more) if it is properly maintained. While the shell of the pool can become damaged if the building was not done correctly, a well-constructed concrete swimming pool should last a lifetime.

user1672994

User

How much cement do I need for a 5 gallon bucket?

A five gallon bucket can hold .

45 cubic feet of concrete when mixed with water.

In other words, one 60 pound bag of pre-mix or an equivalent Portland Cement/rock and sand mix..

Keith

User

How much cement do I need for a 20x20 slab?

With a brief look, a 20x20 area at 6 inches deep, you would need approximately 10.52 tons or 7.41 cubic yards of gravel. Concrete reinforcing is also recommended in high traffic areas and medium to large areas.

u0b34a0f6ae

User

How many bags of concrete do I need for a basketball court?

elevenThe recommended hole size is 16 inches in diameter and 48 inches deep. You will need eleven 80-lb bags of concrete for the installation. How much does it cost to install an in ground basketball hoop? On average, installation will cost around $450.00 for an in-ground system if you have it professionally installed.

Chris Moschini

Guest

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

BlivetWidget

Guest

How long does an inground concrete pool last?

Gunite. Gunite pools are among the longest-lasting pools on the market. When gunite pools are properly installed they could potentially last 100+ years. They are extremely durable and totally customizable.

Timus

Guest

How much concrete should I get around my pool?

Table and chairs for up to eight requires a minimum 12' x 12' concrete slab. Small end tables and chairs do vary on size of the table. For concrete purposes we generally recommend 5' x 5' concrete slab. Tanning lounger/ Chaise loungers need a minimum of 8' of concrete off of the swimming pool.

Betamos

Guest

How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Colonel Panic

Guest

How much insulation do I need under a concrete floor?

A 50mm thick layer of proprietary floor slab insulation is usually enough to reach and maintain the target U value but this should be checked with an architect first. Insulation sheets should be laid tightly together with the joints staggered to avoid movement.

Thomas Pornin

Guest

How much concrete do I need for deck footings?

In order to have enough concrete for one cubic foot, you'll require 2.2 bags of 60-lb concrete.

Since bags are only sold in whole (not half, or quarter) quantities, you'll need to purchase three (3) 60-lb.

bags for one cubic foot..

Mạnh Quyết Nguyễn

Guest

How much concrete goes around a pool?

If you're looking for a good starting point when designing your deck, we recommend a minimum of four feet on each side and eight feet on each end (for a rectangle pool). This will give you ample room for navigating the perimeter of the pool, and a little space for some seating.

rouble

Guest

How much does it cost to pour concrete around a pool?

Cost of Concrete Pool DeckConcrete Pool Decks CostsZip CodeSq. ft.BasicBetterConcrete Pool Decks – Installation Cost$2187.50 - $2222.50$2275.00 - $2677.50Concrete Pool Decks – Total$2677.50 - $2747.50$2852.50 - $3342.50Concrete Pool Decks – Total Average Cost per square foot$7.75$8.851 more row

LF00

Guest

How much plaster do I need for a room?

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

Sebastian Paaske Tørholm

Guest

How long does a concrete pool last?

10 yearsConcrete Pool: A concrete pool will last longer than a vinyl liner pool, but keep in mind, you'll need to get it resurfaced about every 10 years. Plus, they're higher maintenance and have higher chemical usage than a fiberglass pool. Fiberglass Pool: Many fiberglass pools last 30 years or more.

ale13

Guest

Should I paint my concrete pool deck?

Concrete pool decks won't need to use a primer coat, but two coats of our pool deck paint is recommended. If the pool deck surface is extremely rough and pitted, you may even want 3 coats, or a thick initial coating.

FelisCatus

Guest

Can you plaster over existing pool plaster?

Replastering is the process of adding a new layer of mortar over the entire interior surface of a concrete pool that already has an existing layer of plaster. This is a maintenance item, and one of the more expensive and common ones that you will need to do if you own a concrete swimming pool.

F. Hauri

Guest

How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Adrian Frühwirth

Guest

Do I need to waterproof concrete floor before tiling?

Cement is actually a very porous material and can easily absorb water. Therefore, any concrete that may come into regular contact with water, such as under tile or for a pool, will need to be waterproofed. If cement is not waterproofed, it can cause issues with the mortar used between the tiles.

Vega

Guest

How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

Axeman

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Programmer

Guest

How much does concrete around a pool cost?

The average cost of stamped concrete around an inground swimming pool is $9–$13 per square foot (depending on region). The average size of a stamped concrete pool patio in most areas is 500–900 square feet.

Aaron Stuyvenberg

Guest

Can you use cement tile in a pool?

Can I use cement tiles for my pool? Yes. But you need to seal the tiles with a sealer that is appropriate to withstand pool chemicals. Avente Tile offers NO guarantee in resistance to chemicals.

jstedfast

Guest

How much does it cost to resurface a concrete pool deck?

Resurfacing also adds strength to your surface by covering and bonding any cracks in your deck. With resurfacing costs starting around $3 to $5 per sq. ft., placing an overlay on your pool deck could save you money and time.

Havenard

Guest

How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly $6 to $11 per 100 square feet, considering you'll need $2 to $3 for pre-mixed joint compound, $0.10 to $0.50 for latex colorant, and $4 to $7 for tinted glaze.

TT.

Guest

How thick should pool plaster be?

Swimming pool plaster topcoats should be of no less than 3/8-inch thickness. An online look at several pool builders shows they apply plaster to in-ground concrete pool at thicknesses from 3/8 inch up to 5/8 inch.

Christian Fritz

Guest

How long do concrete pools last?

These types of inground pools last up to 25 years or more. Depending on the pool builders you choose to construct the swimming pool of your dreams. Gunite: A Gunite pool is made up of a concrete. There are steel bars that are laid down first to support the concrete, then it is all topped off with a plaster coating.

Matthias

Guest

How do I calculate how much concrete I need?

Quantity of cement = 1/13 × 1.54 m3 × 1440 kg/m3 = 170 kg, no of bag cement for 1m3 m7. 5 concrete = 170/50 = 3.4. If rate of cement = INR 400 per bag, then cost of 3.4 bags cement = 3.4 ×400 = INR 1360.