Best answer

Calculate Concrete Volume With the volume of the submerged post and the volume of the hole figured out, subtract the post volume from the hole volume, and you will have the volume of concrete needed for each hole.

Simply multiply that amount times the number of posts to get a total quantity..

Answered by: spuder Date created: Jun 27, 2022

How many bags of concrete do I need for a post hole?

Asked By: choz Date created: Jun 24, 2022

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 - 48 hours.

Answered By: Yihui Xie Date created: Jun 24, 2022

Do you have to mix concrete for post holes?

Asked By: Hans Z. Date created: Jun 25, 2022

cement needs to be MIXED then ramped to settle & burst air pockets. Filling a hole BLINDLY with water is COMPLETELY WRONG. CEMENT HAS TO BE MIXED IN A THICK POUR FOR PROPER P.S.I. PERIOD.

Answered By: thanksd Date created: Jun 26, 2022

Can I use plaster to fill holes?

Asked By: Boris Date created: Jun 17, 2022

How to repair cracks and holes in plaster. You can fill a deep crack with screwed-up newspaper, which makes a good base for the filler. For larger holes, you might need to build up several thin coats of filler rather than one thick one, making sure to let each coat dry before adding the next.

Answered By: Adam Halasz Date created: Jun 19, 2022

How many bags of concrete do I need for a 6x6 post?

Asked By: BuddyBob Date created: Jun 19, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: SiddAjmera Date created: Jun 20, 2022

How much concrete do I need for a deck post?

Asked By: Unnie Date created: Jun 22, 2022

One 80-lb bag of concrete yields . 60 cubic feet when combined with 4 quarts of water. If you're purchasing 80-lb bags of concrete, you'll need 1.66 bags of concrete. As before, since bags of concrete are only sold in whole quantities, you'll need to purchase two (2) 60-lb.

Answered By: Myrddin Emrys Date created: Jun 24, 2022

How much sand and cement do I need for brickwork?

Asked By: boetis Date created: Jun 10, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: Mikhail Berlyant Date created: Jun 13, 2022

How much cement do I need for a brick wall?

Asked By: Katriel Date created: Jun 25, 2022

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Answered By: Mike M. Date created: Jun 28, 2022

How much sand and cement do I need for 100 blocks?

Asked By: Owen Kelvin Date created: Jun 15, 2022

You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Answered By: Daniel Magliola Date created: Jun 18, 2022

How much sand and cement do I need for 1000 blocks?

Asked By: Sam Harwell Date created: Jun 15, 2022

For laying bricks and blocks in normal applications (SABS Class II) To lay 1000 bricks = 3 bags cement + 0.6 cu. m. sand.

Answered By: eliasah Date created: Jun 16, 2022

How much cement do I need for 1m3 concrete?

Asked By: florisla Date created: Jun 13, 2022

Typically, 1m3 of concrete is made up of 350Kg of cement, 700Kg of sand, 1,200Kg of chippings and 150 Litres of water..

Answered By: Sinan Ünür Date created: Jun 15, 2022

Related Question Answers

guettli

Professor

How do you install a concrete sleeper retaining wall?

STEP 1: BASE PREPRATION. Clear and level your site where you plan to build the retaining wall. ... STEP 2: POST HOLES. ... STEP 3: AUGER HOLES. ... Step 4: Placement of Steel Posts. ... Step 5: Concrete Placement. ... Step 6: Concrete Sleeper Placement. ... Step 7: Backfill Drainage Material.

BroiSatse

Professor

How much concrete do I need for a 4x4 fence post?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

solaimuruganv

Professional

How much concrete do I need to set a deck post?

One 60-lb bag of concrete gives you . 45 cubic feet of concrete when mixed with 2.5 quarts of water. In order to have enough concrete for 1 cubic yard (27 cubic feet), you'll require 2.2 bags of 60-lb concrete.

Tunaki

Professional

How many bags of concrete do I need per fence post?

two bagsOur example post will require two bags for every post if you're using fast-setting concrete. Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow.

tjebo

Professional

How do I prepare my concrete for epoxy coating?

Prepping Your Concrete Floor Before you apply any coating, you need a clean, dry floor without debris, moisture, cracks or holes. Give the area a thorough sweep. Clean up any grease stains with a degreaser and a stiff brush. You don't need to remove all of the discoloration, just the greasy residue.

Mauricio Scheffer

User

How many bags of concrete do I need for a post footing?

45 cubic feet of concrete when mixed with 2.5 quarts of water.

In order to have enough concrete for 1 cubic yard (27 cubic feet), you'll require 2.2 bags of 60-lb concrete.

Since bags are only sold in whole (not half, or quarter) quantities, you'll need to purchase three (3) 60-lb.

bags for one cubic yard..

mrry

User

Do I need concrete for mailbox post?

No concrete needed. Bury an empty 6 or 8 inch tube two feet deep, and flush with the ground. Compact the soil around it. Then center and level your mailbox within the tube, and fill around the post with sand.

Nathan Long

User

How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

skyfoot

User

How much rapid set concrete do I need?

Calculate the volume of the hole in cubic metres (using V = πr2h) and then subtract the volume of your post. This will give you the volume of concrete required. Simply multiply the volume figure by 108 (108 bags per cubic metre) to give the amount of 20kg bags needed to fill the void.

PineCoders-LucF

Guest

How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

kn3l

Guest

How much concrete is needed for a fence post?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing.

Your post diameter and height determine how big each hole needs to be.

As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post..

Abelisto

Guest

How do you cement a vinyl fence post?

Not All Cement Is Created Equal – Don't Pour Until You Are SureDig and prepare the holes in advance.Line the bottom with pea gravel.Set the post straight in the hole.Pour the dry setting cement.Give it time when dry setting fence posts.

Patrick

Guest

How much concrete do I need for 6x6 post?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground. The diameter of your post hole should be three times the diameter of your post.

Jaime

Guest

How much concrete do I need for a steel fence post?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place.

The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.

Depth of the hole is one-third to half the above ground height of the fence post..

Chen A.

Guest

How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

Zain

Guest

How much concrete do I need to set a post?

Remember, the depth of the post hole should be one-half of the above-ground post height.

(Example: For a 6 feet above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

The calculator will indicate the number of 50 lb.

bags of QUIKRETE® Fast-Setting Concrete you need..

flyx

Guest

How much concrete is in a post hole?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground.

SimpleCoder

Guest

How thick of concrete do you need for a 2-post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience.

Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed..

Mecki

Guest

How much plaster do I need for a room?

Once you know how big the room is and ideally know how many square meters are in it, you can simply divide that figure by 9 to give you about how many bags of multi finish plaster you will need. Multi finish covers 10m2, but I say 9m2 to all allow for wastage.

luc

Guest

How many bags of concrete do I need for a fence post hole?

1 - 4 bagsMost fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

Blender

Guest

How much cement do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Aminadav Glickshtein

Guest

How much concrete is needed for a gate post?

Add 4 to 6 inches of concrete to the bottom of the hole, or enough to hold a post steady. Set a post in position. Use a carpenter's level to ensure the post is straight up and down, or plumb. Adjust the height of the post so you have the desired amount above ground.

jterrace

Guest

How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Carl Zhao

Guest

How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

moshez

Guest

How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

AndiDog

Guest

How much concrete is in a fence hole?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Elad

Guest

What kind of concrete should I use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.

Tom

Guest

How much concrete do I need for fence posts?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

MvG

Guest

How do you pour concrete in post holes?

Set the post into the hole and attach 2x4 braces to adjacent sides of the post. Use a level to position the post perfectly vertical. Fill the hole with Fast-Setting Concrete up to 3 to 4 inches below ground level. Pour about a gallon of water per 50 lb bag into the hole and allow the water to saturate the concrete mix.

Jack J Jun - MSFT

Guest

How much concrete sealer do I need?

Apply the Sealant Depending on how porous your concrete is, a gallon of sealer will cover 250 to 500 square feet.

Kaushik Ghosh

Guest

How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly $6 to $11 per 100 square feet, considering you'll need $2 to $3 for pre-mixed joint compound, $0.10 to $0.50 for latex colorant, and $4 to $7 for tinted glaze.

karthikr

Guest

How do I keep my fence post straight when concrete is set?

Setting the Post You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

Serge de Gosson de Varennes

Guest

How do you cement a post?

Dry Method Instructions:Prepare and wet the hole. Before you begin, you need to dig and prepare the hole. ... Place post into the hole. Place the post into the hole. ... Place concrete into the hole. ... Pour water on top. ... Tamp the mix. ... Mix concrete with water. ... Place mixture into the hole.Aug 19, 2019

Welbog

Guest

How long do concrete posts take to set?

How long does concrete take to set in a post hole? We would advise waiting at least four hours before any weight or pressure is applied to the posts or fence holes. For best results, you should wait at least 24 hours before you continue hole and fence construction.

crifan

Guest

What is the best concrete to use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow.

Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4..

Simone Rossaini

Guest

What kind of cement do you use for fence posts?

Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow. Once you've finished digging your post holes, add about three to four inches of gravel into the bottom and compact it using a post or a 2x4.