Best answer

1/2 inchUnlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

Answered by: UnkwnTech Date created: Jun 23, 2022

How thick should plaster skim be on plasterboard?

Asked By: Slava Fomin II Date created: Jun 07, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set. Cover the entire surface in one go — don't stop halfway.

Answered By: Abimaran Kugathasan Date created: Jun 10, 2022

How thick should plaster be on plasterboard?

Asked By: sathishk2030 Date created: Jun 15, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: Seth Ladd Date created: Jun 17, 2022

How do you thicken plaster of Paris?

Asked By: pirho Date created: Jun 08, 2022

In the end, the plaster should be thick, but not difficult to stir. If it seems too thick, add more water. If it is too runny, add more flour until it thickens. Work with the plaster within 10 minutes.

Answered By: Diego Puente Date created: Jun 10, 2022

How thick should a concrete slab be for a mobile home?

Asked By: Elazar Date created: Jun 08, 2022

4 to 6 inches

Answered By: j1mbl3s Date created: Jun 08, 2022

How thick does a concrete slab need to be for a garage?

Asked By: billz Date created: Jun 14, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: Andrii Naidenko Date created: Jun 16, 2022

How thick should tile cement be?

Asked By: ralphtheninja Date created: Jun 21, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: Rémi Rousselet Date created: Jun 24, 2022

How thick should concrete footings be?

Asked By: BFree Date created: Jun 16, 2022

Footing thickness - 8 to 12 inches. Footing depth - varies based on frost line and soil strength (some footings can be shallow, while other must be deep)

Answered By: AnApprentice Date created: Jun 17, 2022

How thick should a concrete driveway be?

Asked By: nay Date created: Jun 14, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: I Hate Lazy Date created: Jun 15, 2022

Can concrete steps be resurfaced?

Asked By: kojiro Date created: Jun 07, 2022

To repair and resurface concrete steps: Use a chisel and wire brush to rough up the surface and remove any loose concrete. ... Once the material has set, apply a thin layer of concrete resurfacer to the top of the steps. Smooth the resurfacer, and add texture with a stiff brush to prevent slipping.

Answered By: Richard Szalay Date created: Jun 09, 2022

How thick does concrete need to be for heavy equipment?

Asked By: Pranav Kasetti Date created: Jun 11, 2022

Six inchesSix inches of thickness should be more than adequate for areas where heavy equipment will be driven and parked. For lesser loads, four inches.

Answered By: Dawid Kruk Date created: Jun 14, 2022

Related Question Answers

Timothy Randall

Professor

How thick should a cement driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Mysticial

Professor

Can rough concrete be smoothed?

Smooth rough concrete with concrete resurfacer. ... Avoid having to smooth rough concrete with an aggressive concrete grinding machine and choose instead to resurface the concrete. Apply wet concrete resurfacer on top of old concrete to create a smooth overlay that gives your patio a fresh, new look.

hsz

Professor

Does concrete resurfacer really work?

Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi. This is actually stronger than the slab itself, so properly applied, resurfacing layers can be very durable.

Ilya Gazman

Professor

How thick should a concrete slab be for a basketball court?

3500 PSIBase Material Many basketball courts are built over a 4” thick concrete slab using 3500 PSI concrete and 1/2″ rebar reinforcements. Concrete is considered ideal for basketball courts as a permanent structure that when done right will not require any maintenance.

Thomas Uhrig

Professional

How do you resurface a concrete exterior wall?

InstructionsRepair the Surface. Concrete resurfacers should be viewed as cosmetic finishes, not repair products. ... Clean and Prepare the Surface. It is critical that the concrete surface is cleaned of all loose debris. ... Mix the Resurfacer. ... Apply the Resurfacer. ... Scuff the Surface. ... Allow the Resurfacer to Cure.Nov 7, 2020

unwind

Professional

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

nicolaskruchten

Professional

How thick should a concrete pool be?

between three and four inchesGenerally, the pool walls need to be between three and four inches thick. Smooth the pool walls with your trowel, as you did for the base. Now the concrete has to cure properly before you can fill it with water. The concrete curing process allows the concrete to reach maximum strength and takes approximately 28 days.

pepper

Professional

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

Ankit Bajpai

User

How much insulation do I need under a concrete floor?

A 50mm thick layer of proprietary floor slab insulation is usually enough to reach and maintain the target U value but this should be checked with an architect first. Insulation sheets should be laid tightly together with the joints staggered to avoid movement.

Pascal Thivent

User

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

Gabriel

User

How thick should a concrete slab be for a pole barn?

4”Thickness – The industry standard for a residential pole barn, where you are storing lawn mowers, toys, or regular vehicles, is reinforced concrete floor that is 4” thick. If you have heavier equipment, you may want to consider flooring up to 6” thick for better wear and tear.

lonesomeday

Guest

How thick should concrete be to hoist?

100mmYour hoist has specific requirements to secure safely to a concrete base. Make sure your concrete is thick enough to support your hoist, minimum thickness is 100mm. Also, ensure your concrete is in good condition with no major cracks.

Pascal MARTIN

Guest

How thick does a concrete sidewalk need to be?

100mmSidewalks should be at least 4" (100mm) in thickness.

Simple slabs for small foundations, bases, etc., normally 4" to 6" (100mm to150mm) thick, depending on the load they must bear.

Slope the walk away from buildings to provide proper drainage..

Baroque

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

chux - Reinstate Monica

Guest

How thick should a concrete drive be?

For a standard driveway your sub-base should be at least 100mm deep (the same depth as the concrete), rising to 150mm if you plan to park larger vehicles on it. The hardcore sub-base needs to be in place and compacted before any ready-mix concrete arrives.

Brown Bear

Guest

How thick should a concrete pool deck be?

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

spencergibb

Guest

Can you paint quikrete concrete resurfacer?

QUIKRETE® Concrete Resurfacer is cement gray in color and can be colored with QUIKRETE® Liquid Cement Color (#1317) or with other pigments approved for use in concrete and masonry products. QUIKRETE® Concrete Resurfacer has been designed to match typical concretes in color. Concrete colors vary.

Mark Pieszak - Trilon.io

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

Alan Thompson

Guest

How thick can you pour concrete resurfacer?

1/2 inchUnlike other cement products, it is designed to be applied in very thin coats (no more than 1/2 inch thick), and its additives provide good adhesion to an existing slab. Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

vadian

Guest

Can you stamp quikrete concrete resurfacer?

Resurfacers can be applied in a variety of thicknesses making it viable for many types restoration repairs. Beyond repair and restoration, resurfacers protect concrete to help minimize maintenance moving forward. Concrete restored with a resurfacer can be colored, stamped and/or stained for added aesthetic value.

Svish

Guest

How good is concrete resurfacing?

Concrete resurfacer is a very strong product, rated for a compressive strength of about 4,500 psi.

This is actually stronger than the slab itself, so properly applied, resurfacing layers can be very durable..

Babken Vardanyan

Guest

How thick does concrete need to be to not crack?

4 inchesApplied-load cracking. In residential concrete, 4 inches is the minimum thickness for walkways and patios. Garage slabs and driveways should be 5 to 6 inches thick if any heavy truck traffic is anticipated, otherwise 4 inches is adequate.

LaytonGB

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

B Seven

Guest

How thick should a reinforced concrete driveway be?

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

Moritz Mahringer

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

Michael Aaron Safyan

Guest

How hot can Concrete get before cracking?

How thick should concrete be to withstand four hours of temperatures of 2000 degree F without degrading or failing? The concrete barrier likely will be exposed to more than 2000 degrees F.

Nathan H

Guest

How hot can Concrete get before it cracks?

How thick should concrete be to withstand four hours of temperatures of 2000 degree F without degrading or failing? The concrete barrier likely will be exposed to more than 2000 degrees F.

dossani

Guest

What is the best concrete resurfacer?

Quikrete Concrete ResurfacerThe best concrete resurfacing material is the Quikrete Concrete Resurfacer (No 1131).

The QUIKRETE® Concrete Resurfacer (No.

1131) is a special blend of Portland cement, sand, polymer modifiers and other additives..

Sahil Chhabra

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Sam Saffron

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

alex

Guest

How thick should finish plaster be?

2mmWhat thicknesses are plasters applied? Undercoat plasters are usually applied at 11mm and most finish coat plasters are applied at 2mm.

jmj

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.

Yahya Uddin

Guest

How thick should pool plaster be?

Swimming pool plaster topcoats should be of no less than 3/8-inch thickness. An online look at several pool builders shows they apply plaster to in-ground concrete pool at thicknesses from 3/8 inch up to 5/8 inch.

Gibbs

Guest

How thick should sand and cement render be?

Render prepared on site using standard sand and cement must be at least 20 to 25mm thick. However, the capability of the render is dependent upon the quality of the sand used, the design mix and is heavily reliant on good mixing techniques by the applicator.

George Mauer

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

Juanjo Conti

Guest

How thin can you lay sand and cement screed?

Traditional cement sand screeds This is more likely to happen if the screed is too thin. Bonded screeds should therefore be thin, normally less than 50mm. Unbonded screeds should be thick, normally 70mm or more, and 100mm or more if curling must be avoided.

TarJae

Guest

How big can a concrete slab be without expansion joints?

Usually, expansion joints should be no farther apart than 2 to 3 times (in feet) the total width of the concrete (in inches). So for a 4 inch thick concrete slab, expansion joints should be no more than 8 to 12 feet apart.

Andrew Marshall

Guest

How thick is a concrete driveway?

75-100mmConcrete paths should be 75-100mm thick, whereas drives, garage bases or hardstandings should be at least 100mm thick. For heavier use, such as large vans, use a 150-200mm thick concrete slab.

Tirth Patel

Guest

How thick should a concrete garage floor be?

Standard Thickness The standard concrete garage floor is six inches thick and, with use of proper control joints, should be thick enough to withstand normal use.

MarsAndBack

Guest

How thick should a concrete shower pan be?

Thickness for Concrete Shower Pan – Base Layer The shower pan base mortar layer thickness should be approximately ½ to 1 inch thick. Since the shower floor already has a pre-slope, just apply a base mortar layer that has an even thickness throughout the shower floor area.

bereket gebredingle

Guest

How thick should a concrete sunroom be?

Four inches is the minimum thickness for a concrete patio.

You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub..

Patrick McElhaney

Guest

How thick should a load bearing concrete wall be?

Therefore I recommend that all the walls should be at least 9 inch thick. 4.5-inch thick walls are not structurally safe if they are beyond 7 feet in height or carry some imposed load.