Best answer

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered by: codeholic24 Date created: Jun 23, 2022

How thick should my concrete slab be?

Asked By: Bill Date created: Jun 16, 2022

4 inchesStandard concrete floor slab thickness in residential construction is 4 inches. Five to six inches is recommended if the concrete will receive occasional heavy loads, such as motor homes or garbage trucks. To prepare the base, cut the ground level to the proper depth to allow for the slab thickness.

Answered By: Rutger Date created: Jun 16, 2022

How thick should plaster be on plasterboard?

Asked By: Colonel Panic Date created: Jun 23, 2022

You should aim for a thickness of around 1–2mm. The plaster you have mixed should last around 40 minutes before starting to set.

Answered By: catavaran Date created: Jun 26, 2022

How thick should a concrete slab be for a mobile home?

Asked By: Maurice Date created: Jun 16, 2022

4 to 6 inches

Answered By: halfbit Date created: Jun 17, 2022

How thick does a concrete slab need to be for a garage?

Asked By: Arvind Kumar Avinash Date created: Jun 11, 2022

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region.

Answered By: Siddharth Rout Date created: Jun 14, 2022

How thick should tile cement be?

Asked By: Peter Krebs Date created: Jun 17, 2022

3mmFor thin bed fixing of tiles, the minimum finished thickness of the adhesive should not be less than 3mm. Hairline cracks of up to 2mm in concrete should be bridged.

Answered By: Ben Y Date created: Jun 20, 2022

How thick should a concrete slab be for a shed?

Asked By: Saeb Amini Date created: Jun 22, 2022

Recommended Thickness of Concrete Slabs Shed Slabs: 3 1/2 inches thick. Shed floors that are being used for studio sheds or workshops will use a 3 1/2" thickness. Driveways: 4 inches, some areas require 5 inches. Many garage sheds need a driveway approaching the large shed door.

Answered By: Gabriele Petronella Date created: Jun 23, 2022

How thick should concrete footings be?

Asked By: naveen Date created: Jun 18, 2022

Footing thickness - 8 to 12 inches. Footing depth - varies based on frost line and soil strength (some footings can be shallow, while other must be deep)

Answered By: Nathan Campos Date created: Jun 21, 2022

How thick should a concrete driveway be?

Asked By: Everett Date created: Jun 17, 2022

four inchesAs for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Answered By: Benjamin Muschko Date created: Jun 19, 2022

Will a dumpster ruin my concrete driveway?

Asked By: Mike M. Date created: Jun 11, 2022

It is quite rare for a dumpster and its weighty debris to cause any damage to a concrete, flat surface. You may still place a dumpster on an asphalt driveway, but the issue here is that the asphalt driveway must be strong and dry enough to avoid impressions and surface damage.

Answered By: John Dibling Date created: Jun 14, 2022

Should I seal my concrete driveway after pressure washing?

Asked By: Danail Petrov Date created: Jun 17, 2022

One way to keep your concrete driveway, walkway or walls looking good is to wash them and seal them every 2 to 3 years. ... Sealer also helps prevent stains from setting in on the concrete. Sealing concrete after pressure washing is similar to painting walls in your house.

Answered By: Lily Ballard Date created: Jun 18, 2022

Related Question Answers

Travis Heeter

Professor

How thick should a cement driveway be?

As for thickness, non-reinforced pavement four inches thick is standard for passenger car driveways. For heavier vehicles, a thickness of five inches is recommended. To eliminate standing water, the driveway should be sloped towards the street a minimum of one percent, or 1/8 inch per foot, for proper drainage.

Joy Wang

Professor

Can I Concrete my own driveway?

It is possible to build an attractive concrete driveway yourself, but careful planning and preparation is necessary. Be sure to place all the concrete at once; a big driveway can be broken down into smaller manageable sections using 2x4's.

Mithun Sreedharan

Professor

Can I pour my own cement driveway?

It is possible to build an attractive concrete driveway yourself, but careful planning and preparation is necessary. Be sure to place all the concrete at once; a big driveway can be broken down into smaller manageable sections using 2x4's.

Amit Kotha

Professor

Do I need to reseal my concrete driveway?

Sealing the driveway yearly can lead to unsightly hairline cracks and peeling. And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. ... Materials to fill minor cracks in concrete come in liquids that sell for a few dollars per gallon.

MauriceNino

Professor

Do I need to seal my new concrete driveway?

Owners of asphalt driveways often seal them too frequently, and owners of concrete driveways don't seal them at all, experts say. ... And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life.

D'Arcy Rail-Ip

Professional

How can I make my old concrete driveway look better?

6 Ways to Make Your Driveway Look Amazing#1: Etching. Nothing sets your driveway apart from the rest like etching. ... #2: Staining. Tired of plain old gray? ... #3: Stamping. Similar to staining or etching, concrete stamping can also spruce up your driveway with color and a pattern. ... #4: Weeding. ... #5: Pavers. ... #6: Resin Bound.

Bart Kiers

Professional

How thick of a concrete slab for a hot tub?

about 4 inchesConcrete Slab The base of reinforced concrete should be about 4 inches thick and be able to withstand a weight of at least 115 pounds per square foot, especially for larger spas. The concrete should be fully cured prior to placing the tub.

squiguy

Professional

When should I resurface my concrete driveway?

Large cracks or holes greater than ¼”, spalling (horizontal peeling or chipping of the surface), and discoloration can be covered with resurfacing or a concrete overlay (a thin layer of cement-based material applied directly over the existing concrete).

Mr_Green

Professional

How thick should a polished concrete floor BE?

about 3 to 5 mmThey typically provide a surface layer about 3 to 5 mm thick. Precautions need to be taken to protect surrounding areas and finishes from the fine airborne particles, and breathing masks should be worn.

shabunc

User

How thick should a concrete fire pit be?

The optimal size for a fire pit is between 36 and 44 inches inside diameter. That will create enough room for a healthy fire but still keep gatherers close enough to chat. As an added precaution, the fire pit should be lined with a thick steel ring like the ones used for park campfires.

AJ Aberdein

User

Should I pressure wash my concrete driveway?

Pressure washing too frequently will cause your concrete surfaces to wear down faster. We recommend pressure washing your concrete driveway or walkways annually. Doing so more often will decrease the longevity of the concrete.

Martin Thoma

Guest

Can my concrete driveway be resurfaced?

Resurfacing involves concrete driveway repair, whereby the entire thing doesn't need to come up. Instead, contractors can come in and address widespread damage by pouring a new layer of concrete over your existing driveway after removing the top layer. The result is a smooth surface that's damage-free and intact.

zellio

Guest

How thick should concrete be for a patio?

Four inches is the minimum thickness for a concrete patio. You'll want to make it six to eight inches thick if the patio will support a structure such as a gazebo or hot tub.

Hong Ooi

Guest

What goes under concrete driveway?

Use wire mesh for driveways that are 4 to 5 inches thick, and rebar for those that are 5 inches or more. Place rebar in a grid pattern with a spacing between bars of approximately 12 inches. In either case, blocks should be used under the reinforcement to keep centered within the concrete.

David Tonhofer

Guest

How much weight can my concrete driveway hold?

Concrete driveways are typically poured four inches thick, giving the concrete driveway enough strength to withstand loads of regular vehicles (up to approximately 8,000lbs). A fully loaded concrete truck can weigh over 70,000lbs, almost nine times heavier than your driveway was meant to withstand.

Denis de Bernardy

Guest

How thick should a concrete drive be?

For a standard driveway your sub-base should be at least 100mm deep (the same depth as the concrete), rising to 150mm if you plan to park larger vehicles on it. The hardcore sub-base needs to be in place and compacted before any ready-mix concrete arrives.

Md. Abu Taher

Guest

What is the best base for concrete driveway?

gravel baseThe gravel base for a driveway should be a minimum of 4 inches deep. If heavier vehicles, such as large trucks, will use the driveway regularly, the gravel should be even deeper, up to 12 inches. Poor soil or a sloped driveway may also require deeper gravel.

Mark Baker

Guest

How thick should a concrete pool deck be?

4 inchesAs a general rule, you should not make a concrete deck less than 4 inches thick. This depth will keep the deck strong enough to withstand general wear and tear. You could choose to make the deck 6 inches thick for good results.

NicoE

Guest

Should I caulk my concrete expansion joints?

Caulking Concrete Cracks and Expansion Joints Caulking the joints and cracks is the best way to stop this from happening. Even expansion joints in your concrete driveway should be caulked. They can be the biggest culprit of water under your slabs.

Brandon Yarbrough

Guest

Should I pave or concrete my driveway?

Asphalt is easier to repair than concrete but needs it more frequently. While both asphalt and concrete crack, asphalt tends to deteriorate faster due to its softer consistency. However, it's fairly easy to repair cracks and damage in asphalt, and the repaired areas generally blend well with the rest of the driveway.

Onkaar Singh

Guest

Can I paint my concrete driveway?

Driveway paint is very thick and the first coat should be thin enough to fill the rough concrete surface. Begin by painting the edges ('cutting in') and details of the driveway using a paint brush. Use a roller to apply paint evenly over the rest of the driveway. Leave the paint to cure for at least 16 hours.

pmg

Guest

How thick should oversite concrete be?

100 mmThe concrete should be at least 100 mm thick and composed of 50 kg of cement to not more than 0.11 m3 of fine aggregate and 0.16 m3 of coarse aggregate of BS 5328 mix ST2.

Bassetassen

Guest

Can you paint your concrete driveway?

Driveway paint is very thick and the first coat should be thin enough to fill the rough concrete surface. Begin by painting the edges ('cutting in') and details of the driveway using a paint brush. Use a roller to apply paint evenly over the rest of the driveway. Leave the paint to cure for at least 16 hours.

dossani

Guest

How thick is concrete around a pool?

6 inches thickTo be structurally sound, a concrete pool shell should generally be 6 inches thick. Depending on the engineer and the soil condition, it may be more. (On top of that, the plaster interior finish should be at least ⅜ inch thick.) The pool will also need to meet the ANSI/APSP standards.

Yash Maheshwari

Guest

How thick should a reinforced concrete driveway be?

4 inchesFor a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. Ideally, the slab has some kind of reinforcement inside.

Timwi

Guest

What PSI should my concrete driveway be?

3000 psi to 4000 psiThe typical concrete strength used for a driveway is in the 3000 psi to 4000 psi range, although temperate areas of the country may use lower strengths. Contractors, when ordering ready mixed concrete, should advise the producer of the intended use for the concrete.

codesections

Guest

What type of concrete should I use for my driveway?

Concrete Characteristics To withstand the weight of vehicle traffic, choose a concrete with a strength of 4,000 pounds per square inch for your driveway. In areas with cold winters, concrete mix should have a 6 percent air-entrainment value.

Aconcagua

Guest

How thick should concrete base be for oil tank?

Where concrete slabs are used, they should be at least 42mm* (recommended 50mm) thick.

The base should extend at least 300mm beyond the widest points of the oil tank and fully support the base of the oil tank in its entirety..

Đăng Khoa Đinh

Guest

Should I put a sealer on my new concrete driveway?

Experts recommend using a penetrating sealer outdoors because it sinks down into the concrete and has a more natural, matte finish. It is very important that sealers used on exterior concrete allow both air and moisture to pass through. A driveway sealer should be applied after the freshly poured concrete has cured.

Tom Hawtin - tackline

Guest

Should I put sealer on my concrete driveway?

And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. Many people believe that concrete driveways don't need maintenance, so they may never apply a sealer. ... The first step in driveway maintenance is the repair of cracks and holes.

Richie Cotton

Guest

Should I resurface my concrete driveway?

Enhances your driveway's appearance: one of the best values of concrete driveway resurfacing is it improves your driveway's appearance. The new layer gives your driveway a fresh look after years of fading and cracking. Extends its lifespan: if you care for your driveway correctly, it should last for up to thirty years.

Wesley Smith

Guest

Should I seal cracks in my concrete driveway?

Cracks up to ¼ inch in width can be filled with sealant. Cracks of this nature may never get any larger, but water can seep into them, freeze, and expand, causing the cracks to widen, so it's a good idea to seal them with the flexible Advanced Polymer Concrete Crack Sealant from Quikrete.

Andrew Eckart

Guest

Should I seal my concrete driveway every year?

Sealing the driveway yearly can lead to unsightly hairline cracks and peeling. And concrete driveways should be sealed every four or five years to protect them from water penetration and to prolong their life. ... This is a good time of year for driveway work.

Grundlefleck

Guest

Should you seal concrete after power washing?

Yes, the driveway definately will need to be sealed. I found out the hard way after pressure washing my drive and not sealing it. The sealer closes up holes in the driveway and prevents water from freezing and cracking in the driveway. Highly recommended.

grigoryvp

Guest

How thick should a cement garage floor be?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

Mark B

Guest

How thick should concrete be for a garage floor?

four-inchesThe concrete slab should be four-inches thick at least; it needs to be thicker if heavy equipment will rest on it. Building codes offer requirements for the concrete mix, which vary by region. The standards are expressed in terms of "compressive strength," which boils down to the amount of water used in the mix.

rakib_

Guest

How thick should plaster mix be?

You should aim for a thickness of around 1–2mm.

The plaster you have mixed should last around 40 minutes before starting to set.

talat

Guest

How thick should self-leveling concrete be?

QUIKRETE® Fast-Setting Self-Leveling Floor Resurfacer (No. 1249-51) can be installed from 1-1/2 inch (38 mm) thick to a feather edge, although a ¼ inch (6.3 mm) minimum thickness is required for heavy traffic areas.

Nawaz

Guest

How do you fill large gaps between concrete slabs?

Dig a 4-inch wide trench along the sides of the slabs from the crack or gap closest to the house all the way down to the street or sidewalk. This trench should be a deep as the slabs are thick. Fill the trenches on either side of the driveway with small, rounded pea gravel (the size of marbles or peas).

Josh Stodola

Guest

When should a concrete driveway be replaced?

If properly installed and cared for, a concrete driveway should last about 30 years. Concrete driveways in colder climate areas may break down sooner but should still last approximately 20 years.

Jin Kim

Guest

When should I replace my concrete driveway?

Typically you'll need to replace an asphalt driveway after 20 years and a concrete drive after 25 years. Repairing a driveway nearing this age is not considered a wise investment. Beyond the condition of your driveway, many old driveways could do with an update just as a home benefits from renovations.

ElpieKay

Guest

When Should I seal my concrete driveway?

How long should I wait before sealing? The recommended curing time for new concrete is 28 days before sealing. It is imperative, whether sealing new or existing surfaces, to ensure that the surface is completely dry before sealing.

Matt

Guest

When Should I seal my new concrete driveway?

A driveway sealer should be applied after the freshly poured concrete has cured. Most contractors find success waiting 7 to 14 days, but the official time for curing is 28 days. If you are having a patio poured at the same time, it should also be sealed.

Ashwini Chaudhary

Guest

Do you need to put rebar in concrete driveway?

For a concrete driveway to last the life of your home, it must be well constructed. Concrete driveway slabs typically are 4 inches thick but can be up to 6 inches thick to provide additional support for large trucks and other heavy vehicle traffic. One common building reinforcement material is rebar.

mob

Guest

How much will my concrete driveway cost?

A concrete driveway costs from $8 to $18 per square foot, depending on decorative colors and finishes. While a plain gray concrete driveway costs between $5 and $7 per square foot to install. Concrete is ideal for getting the look of stone or pavers, without the high cost.