Best answer

Whereas drywall comes in 4-by-8 sheets, cement board comes in 3-by-5 sheets. ... The smaller dimensions of cement board make the installation of it on large walls more difficult, but cement board panels fit vertically in 3-foot wide showers, or horizontally behind a standard 5-foot bathtub.

Answered by: Edwin Buck Date created: Jun 25, 2022

Is backer board and cement board the same?

Asked By: David Jacquel Date created: Jun 10, 2022

Also called a cementitious backer unit or CBU, backer board is made of cement, water, silica, limestone flour, and fibers such as Kevlar or fiberglass for strength. Because cement backer board is porous, thinset, grout, and mortar adhere well to it.1 Dec 2019

Answered By: Mizipzor Date created: Jun 13, 2022

What is the difference between plaster and drywall?

Asked By: Jon Skeet Date created: Jun 14, 2022

Plaster is a much older style of wall construction than drywall. Drywall installation is not as labor-intensive as plastering. This means that putting up drywall is not as expensive as plaster walls. Plaster walls have a much more durable finish than drywall when it sets up and is a higher quality finish.

Answered By: Maccurt Date created: Jun 16, 2022

Is cement board needed for floor tile?

Asked By: David Date created: Jun 19, 2022

In short, tile and grout are not inherently waterproof. Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete.1 Dec 2019

Answered By: bevacqua Date created: Jun 19, 2022

How do you fix crumbling plaster walls?

Asked By: DRapp Date created: Jun 24, 2022

Repairing holes and crumbled plaster requires removing the damage and patching empty spaces. Scrape or brush off loose plaster to reveal the lath underneath. Drywall makes a suitable patch for the resulting bare spot, and drywall screws fasten it to the lath. Masking the repair is the same as with a drywall repair.

Answered By: derfred Date created: Jun 26, 2022

Is it better to plaster or drywall?

Asked By: DavidG Date created: Jun 18, 2022

Drywall is a more common building choice than plaster walls are. Drywall installation is not as labor-intensive as plastering. This means that putting up drywall is not as expensive as plaster walls. Plaster walls have a much more durable finish than drywall when it sets up and is a higher quality finish.

Answered By: Thomas Owens Date created: Jun 21, 2022

Can you paint cement board in shower?

Asked By: Haim Evgi Date created: Jun 14, 2022

Can you paint cement board in shower? Not likely. but Hardie backer board's official installation tutorial says it can be finish with paint. Use the backer board on the tiled part, and use the moisture resistant drywall on the rest.

Answered By: dumazy Date created: Jun 14, 2022

How thick should cement board be under tile floor?

Asked By: Koraktor Date created: Jun 25, 2022

Floors: A 1/4-inch minimum thickness is needed, but thicker panels are also fine. Walls: Use 1/2-inch or 5/8-inch-thick cement board, not 1/4-inch. The extra thickness is needed to span the studs and provide a solid base for the tile.

Answered By: AKS Date created: Jun 27, 2022

Can I use deck screws for cement board?

Asked By: Jess Date created: Jun 13, 2022

It's best to use the cement board screw, but a deck screw will do just fine. ... Use screws designed for cement board like Rock-On screws. They start easier than drywall screws in CBUs. They're easier to use, don't rust as easily and hold better.

Answered By: Charles Brunet Date created: Jun 14, 2022

Can I use drywall mesh tape for cement board?

Asked By: Mohsen Date created: Jun 17, 2022

No. The Mold-X10 fiberglass mesh tape is made for drywall seams and intended to be coated with joint compound. FibaTape's Cement Board Tape is the product for cement board. The alkali-resistant coating protects the fiberglass from degradation that can occur with thin-set mortar.

Answered By: jhnc Date created: Jun 20, 2022

Do you need green board behind cement board?

Asked By: Escualo Date created: Jun 14, 2022

Because cement board can be used either for floors or walls, the surface below the cement board will vary: ... In such wet areas, never install cement board directly over drywall or green board. Instead, first, remove the existing surface material, then install the cement board over the studs and membrane, as applicable.

Answered By: Ele Date created: Jun 17, 2022

Related Question Answers

Daniel Rearden

Professor

What do you put behind cement board in shower?

Cement Board and a Liquid Membrane No plastic sheeting goes behind the cement board.

A liquid waterproofing membrane, such as RedGard or Hydro Ban, is applied to the cement board and allowed to cure.

Then, tile is installed over the membrane..

Ben Fortune

Professor

Is backer board the same as cement board?

Cement backer board is also called cement board, and it's the most commonly used backer board for all manner of ceramic and porcelain tiles. Made of cement and reinforced on the top and bottom with fiberglass, this waterproof backer board is generally used for tiled shower surrounds and floors in wet areas.

John La Rooy

Professor

Can you tile directly onto cement board?

Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete. Manufactured veneer stone is another use for cement backer board.

Kaz

Professor

Do you put cement board under a shower pan?

Once the subfloor of proper thickness is properly installed then you can apply cement board directly to the subfloor material. ALL CEMENT BOARDS MUST be installed in a fresh bed of thinset. ... If you want the cement board under the shower tray then do so - doesn't matter.

German Attanasio

Professor

Are plaster and joint compound the same?

Joint Compound While plaster-and-lath construction was common in older homes, walls in modern homes are more often built with wall board, also often called drywall or sheetrock, screwed to wooden wall studs. Joint compound typically consists of a gypsum-based powder that's mixed with water to form a paste.

Raynos

Professional

Can you finish cement board like drywall?

When you buy cement board it requires the same installation materials as drywall but with a twist. ... Instead of using drywall joint compound to embed the tape in the cement board you should use thin-set mortar. We utilized the same thin-set that will be used to attach the tiles.

ch271828n

Professional

Can you glue stone veneer to cement board?

What can I put stone veneer on for an interior application? For interior applications, stone veneer can be installed over cement board, drywall, and all of the above.

MvG

Professional

Can you put cement board over tile?

Cement board forms a durable, stable base for tile, and it has no organic materials (unlike drywall, greenboard, or plywood) so it is not prone to mold, rot, shrinkage, or decomposition due to moisture. Ceramic tile laid over cement board is one of the most durable floor or wall surfaces you can install.

Felipe Hoffa

Professional

Can you put cement over silicone?

Yes, silicone will stick to cement board.

In fact I highly recommend that you use cement board such as 'Durock' as your backer board.

Use proper screws.

Such as the specific cement board screw..

Everton

Professional

How do you cut and install cement board?

Lay your cement board flat, and draw a line with a carpenter's pencil where you intend to cut. Place a straightedge along the line and drag either a drywall utility knife or a scoring tool against it. Repeat your cuts two to three times to make them deeper, which will make snapping the board easier.

Brian Parker

User

Can you use cement board for shower walls?

Cement Board and a Sheet Membrane Kerdi can also be installed directly over standard drywall in a shower because, when installed correctly, it creates a continuous waterproof barrier..

cyb3rZ

User

Can you use cement board instead of drywall?

Regular drywall is not appropriate. Many professional installers even recommend against using water- or mold-resistant drywall in high-moisture areas. In sharp contrast, cement backer board does not rot, warp, grow mold, or deteriorate when subjected to water.

str

User

Do I have to use cement board under Wall Tile?

In short, tile and grout are not inherently waterproof. ... Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete.

R. Martinho Fernandes

Guest

Do you need plywood under cement board?

The Surface Below the Cement Board Flooring: For ceramic tile floors, the cement board usually rests on a plywood subfloor (minimum 5/8-inch-thick exterior-grade plywood or OSB). ... In such wet areas, never install cement board directly over drywall or green board.

jm666

Guest

Does Loctite Power Grab work on cement board?

It will bond to drywall, plaster, vinyl cove base, polystyrene, polyurethane foam covings, PVC (rigid plastic), stainless steel, glass, wood, plywood, stone, brick, concrete, chip board, ceramics, foam board, cork, and carpet.

Artur Czajka

Guest

Does silicone stick to cement board?

Yes, silicone will stick to cement board. In fact I highly recommend that you use cement board such as 'Durock' as your backer board. Use proper screws. Such as the specific cement board screw.30 Sep 2015

Axeman

Guest

Does stud finder work through cement board?

Finding a stud inside drywall is straightforward stuff, which is why even basic stud finders will work well. ... While drywall setup is pretty basic, tile may feature a cement board, layers of mortar, a variety of fasteners, and even metal studs.

Matt

Guest

What thickness cement board should I use?

Half-inch cement backer board is ideal for most tiling jobs, including walls, floors, countertops, and ceilings.

For flooring, the backer board should be installed over a 5/8-inch thick OSB or plywood base..

Prune

Guest

Will silicone adhere to cement board?

Yes, silicone will stick to cement board. In fact I highly recommend that you use cement board such as 'Durock' as your backer board. Use proper screws.

turivishal

Guest

Can you install cement board over drywall?

Because cement board can be used either for floors or walls, the surface below the cement board will vary: ... In such wet areas, never install cement board directly over drywall or green board. Instead, first, remove the existing surface material, then install the cement board over the studs and membrane, as applicable.

kpimov

Guest

What is the best way to cut cement board?

Score-and-Snap The simplest way to cut cement backer board is to score the surface and snap the sheet along the scored line, similar to the way you'd cut drywall.

In fact, you can use a drywall utility knife to score backer board, but a better option is a carbide-tipped scoring tool..

Hates_

Guest

Should I put plastic behind cement board?

No plastic sheeting goes behind the cement board. A liquid waterproofing membrane, such as RedGard or Hydro Ban, is applied to the cement board and allowed to cure. Then, tile is installed over the membrane.

prehistoricpenguin

Guest

Can you put cement board on metal studs?

Cement backerboard is perfect for wet and high-moisture applications, such as kitchens and bathrooms, where you'll typically install the panels over a moisture-resistant drywall or plywood sheathing. Cement backerboard mounts to metal stud framing using the same procedure as wood framing.

Ander Biguri

Guest

Are concrete walls fire rated?

The minimum equivalent thicknesses of cast-in-place or precast concrete walls for fire-resistance ratings of 1 hour to 4 hours are shown in Table 722.2. ... For solid walls with flat vertical surfaces, the equivalent thickness is the same as the actual thickness.

Eric

Guest

Can I use regular drywall screws on cement board?

You don't want to use regular drywall screws for cement boards. They can corrode, they can break down the edges of the boards, and they won't drive in flush properly. Use ITW's ROCK-ON and BACKER-ON screws instead.

sinoohe

Guest

Can you put cement board on the floor?

Cement board is a type of underlayment that is now standard for most tile installations, but particularly for floor tile.

The primary benefit of cement board is that it doesn't break down or expand or warp if it gets wet.

This is a distinct advantage over plywood and drywall..

Bo Persson

Guest

Should I put Thinset under cement board?

Embed the cement board in latex-modified thin-set mortar The main reason for using thin-set between the cement board and the subfloor isn't as much for bonding as it is for even, void-free cement board support throughout the floor. ... Then spread thinset mortar with the flat side of a 1/4-in.

match

Guest

What do you put on seams of cement board?

Use special mesh tape on seams Cut drywall to fill in between the existing wall or ceiling and the cement board. Screw the drywall to the studs. Cover all of the corners, joints and seams, including the joint where drywall and cement board meet, with the fiberglass mesh tape.

Timus

Guest

Is contact cement and rubber cement the same?

Rubber cement is almost the same as generic Contact Cement in that both pieces to be joined are coated with the cement, allowed to dry and then joined together. Contact cement works best on plastics, veneers, rubber, glass, metal and leather..

blowdart

Guest

Should I use cement board or Hardibacker?

There is nothing wrong with Hardibacker, it's a good product. It isn't as messy as the old-fashion cement boards when you cut it. It also isn't as easy to cut as they make it out to be but you can score and break it sorta like drywall.

Richard Garside

Guest

Can I repair plaster walls with spackle?

Spackling plaster walls is done the same way as you would for drywall. The easiest way to patch small holes and and cracks is to use spackling or drywall compound. Plaster and drywall are both gypsum based, so the two materials will adhere to one another.

pkamb

Guest

Is plaster wall the same as drywall?

Plaster has many advantages over modern drywall. It provides better insulation, fireproofing and soundproofing than drywall. Also, unlike drywall, it will not harbor mold because mold cannot grow in it. ... When building a new house, real plaster walls are more expensive than drywall.

bookcasey

Guest

What is the fire rating of cement board?

A Durock panel with a thickness of 1/2 or 5/8 inch can provide two hours of fire protection when installed correctly and in conjunction with all fireproofing construction materials..

Camilo Martinez M.

Guest

Do I need cement board for shower ceiling?

It can be, but it's not really necessary. You can tile directly to drywall in any dry area. If your doors go all the way to the ceiling, you might consider cbu verses any kind of drywall on the ceiling, otherwise, it is considered a dry area.

grigoryvp

Guest

Where do you put cement board in a bathroom?

Cement backer board is mainly used as a sub-surface for tiling. Cement backer board is often used as a tile base on plywood or OSB subfloor. Cement backer board on concrete as a subfloor or underlayment is usually not recommended or needed. In most cases, you can apply tile directly to the concrete.

MikeN

Guest

Is concrete board waterproof?

As a tile backing board, cement board has better long-term performance than paper-faced gypsum core products because it will not mildew or physically break down in the continued presence of moisture or leaks.

...

Cement board is not waterproof.

It absorbs moisture as well, but it has excellent drying properties..

David Grayson

Guest

What do you cut cement board with?

The simplest way to cut cement backer board is to score the surface and snap the sheet along the scored line, similar to the way you'd cut drywall. In fact, you can use a drywall utility knife to score backer board, but a better option is a carbide-tipped scoring tool.

David L. Walsh

Guest

Is lath and plaster better than drywall?

Lath and Plaster vs. Lath and plaster walls are usually thicker than most drywall sheets. Fire-rated, or Type-X, drywall is 5/8-inch thick. Plaster is often thicker than this. When lath is figured into the thickness, then lath and plaster walls are considered to be thicker than drywall.

Steve Tjoa

Guest

Is plaster and joint compound the same?

Joint Compound While plaster-and-lath construction was common in older homes, walls in modern homes are more often built with wall board, also often called drywall or sheetrock, screwed to wooden wall studs. Joint compound typically consists of a gypsum-based powder that's mixed with water to form a paste.

apokryfos

Guest

Is plaster dust dangerous to dogs?

It is known to be associated with various eye, nose and throat irritation in people, but your dog can experience the same problems. Dogs with weakened immune and respiratory systems, should not be around drywall dust, as it can cause breathing difficulties.

Tom

Guest

What is the difference between cement board and gypsum board?

Advantages. As a tile backing board, cement board has better long-term performance than paper-faced gypsum core products because it will not mildew or physically break down in the continued presence of moisture or leaks. Also cement board provides a stronger bond and support with tiles than typical gypsum board.

joe

Guest

How thick is lath and plaster ceiling?

The minimum total thickness for plaster on gypsum board (rock lath) is Æ inch. On metal lath the minimum thickness is 5/8 inch; and for wood lath it is about 3/4 to 7/8 inch.19 Dec 2018

Leo Liu-MSFT

Guest

What do you use on cement board seams?

Use special mesh tape on seams Cover all of the corners, joints and seams, including the joint where drywall and cement board meet, with the fiberglass mesh tape.

Sundeep

Guest

What goes behind cement board in shower?

Cement Board and a Liquid Membrane No plastic sheeting goes behind the cement board. A liquid waterproofing membrane, such as RedGard or Hydro Ban, is applied to the cement board and allowed to cure. Then, tile is installed over the membrane.

DeanAttali

Guest

Can you use drywall screws for cement board?

Therefore, drywall screws or nails will not work for cement boards. The fasteners designed for use with drywall do not feature the corrosion- and alkali-resistant coating that enables the cement board or galvanized fasteners to last.