12,000 pound two-post lifts (and higher capacity): Six (6) inches of concrete at 3000 PSI is required.

Answered by: SIM Date created: Jun 25, 2022

## How many bags of concrete do I need for a 5 gallon bucket?

Asked By: Brock Woolf Date created: Jun 08, 2022

Your 5 gallon bucket is 0.7777850 cubic feet dry. You will need 2 - 50lb bags of Quikrete Fast Setting Concrete Mix to complete your project.

Answered By: Blasanka Date created: Jun 10, 2022

## How many bags of concrete do I need for a post hole?

Asked By: David Wasser Date created: Jun 22, 2022

Mix two 50lb bags of concrete with water in a mixing tub or 5-gallon bucket. Add concrete into the hole and around the 4” x 4”. Depending on your climate, let concrete set up for 24 - 48 hours.

Answered By: Alik Date created: Jun 23, 2022

## How many bags of cement do I need for a 2 bedroom house?

Asked By: Chris Date created: Jun 24, 2022

40 bags

Answered By: grepit Date created: Jun 25, 2022

## How many bags of concrete do I need for a 6x6 post?

Asked By: Thomas Dickey Date created: Jun 12, 2022

As I recall, a 60# bag of concrete is about . 5cf, so you'd need 3 bags per hole.

Answered By: OscarRyz Date created: Jun 12, 2022

## How much concrete do I need for a deck post?

Asked By: Yaakov Ellis Date created: Jun 07, 2022

One 80-lb bag of concrete yields . 60 cubic feet when combined with 4 quarts of water. If you're purchasing 80-lb bags of concrete, you'll need 1.66 bags of concrete. As before, since bags of concrete are only sold in whole quantities, you'll need to purchase two (2) 60-lb.

Answered By: Gord Thompson Date created: Jun 08, 2022

## How much sand and cement do I need for brickwork?

Asked By: Andy Wilkinson Date created: Jun 08, 2022

1:6 ratio of mortar for brickwork which means cement:sand = 1 part of cement and 6 parts of sand.

Answered By: Somnath Muluk Date created: Jun 09, 2022

## How much cement do I need for a brick wall?

Asked By: Libbaaaa Date created: Jun 14, 2022

Quantity of cement, Sand or Mortar Required for Brickwork: 1:6 ratio of cement mortar is usually used for brickwork.

Answered By: Marco Bonelli Date created: Jun 16, 2022

## How much sand and cement do I need for 100 blocks?

Asked By: Noufal Ibrahim Date created: Jun 20, 2022

You will need 1000 lbs of sand for the mortar for those 100 blocks. The Recipe for Mortar sand mix will be 1 Part Mortar to 2-1/2 Parts Sand.

Answered By: Andrea Tulimiero Date created: Jun 22, 2022

## How much concrete do I need for a 4x4 fence post?

Asked By: Andy Brown Date created: Jun 21, 2022

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Answered By: Steve Tjoa Date created: Jun 21, 2022

## How many bags of concrete do I need for a 3 foot post hole?

Asked By: Amelio Vazquez-Reina Date created: Jun 20, 2022

I normally use post hole diggers (6" diameter?) 3 feet deep and ½ a bag of redi-mix per post.

Answered By: Clifford Date created: Jun 20, 2022

Professor

### How many bags of concrete do I need for a 6x6 post hole?

As I recall, a 60# bag of concrete is about .

5cf, so you'd need 3 bags per hole..

Professor

### How many bags of concrete do I need for a 8x8 slab?

How many concrete bags would I need for a 8 ft x 8 ft x 6" slab? 54 x 80lb Concrete bags. How much does it cost to pour a 8'x8' x6" slab? Ready-mix costs approx \$277.86.

Professor

### How much concrete do I need for a metal fence post?

Each hole for the terminal posts must be 8 inches in diameter and 30 inches deep, requiring 0.85 cubic feet of concrete to fill.

Professor

### How much concrete do I need to set a deck post?

One 60-lb bag of concrete gives you . 45 cubic feet of concrete when mixed with 2.5 quarts of water. In order to have enough concrete for 1 cubic yard (27 cubic feet), you'll require 2.2 bags of 60-lb concrete.

Professor

### How many bags of concrete do I need per fence post?

two bagsOur example post will require two bags for every post if you're using fast-setting concrete. Fast-setting concrete is ideal for installing fence posts since it doesn't need to be mixed in a bucket or a wheelbarrow.

Professional

### How thick does the concrete need to be for a car lift?

100mmThe minimum and recommended thicknesses of concrete slab for car hoists. Garage Equipment's two and four post hoists require a minimum of 100mm (about 4”) of reinforced concrete slab to be safely installed.

Professional

### Do I need concrete for mailbox post?

No concrete needed. Bury an empty 6 or 8 inch tube two feet deep, and flush with the ground. Compact the soil around it. Then center and level your mailbox within the tube, and fill around the post with sand.

Professional

### How much crushed concrete do I need?

Beside above, how much crushed concrete do I need calculator? In the construction world, most materials are measured in cubic yards. Multiply the length (L), in feet, by the width (W), in feet, by the height (H), in feet, and divide by 27. This will tell you how many cubic yards of crushed stone you need.

Professional

### How much rapid set concrete do I need?

Calculate the volume of the hole in cubic metres (using V = πr2h) and then subtract the volume of your post. This will give you the volume of concrete required. Simply multiply the volume figure by 108 (108 bags per cubic metre) to give the amount of 20kg bags needed to fill the void.

Professional

### How much concrete do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

User

### How many bags of concrete do I need for a mailbox post?

Pour the dry concrete straight into the hole leaving 3 to 4 inches of space from the top of the hole. In most cases a 50-pound bag of quick-dry concrete should suffice.

User

### How much concrete is needed for a fence post?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing.

Your post diameter and height determine how big each hole needs to be.

As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post..

User

### How much concrete do I need to fill a 55 gallon drum?

As to how many bags....a 55 gallon drum filled clear to the top is actually closer to 60 gallons. And 60 gallons is 8 cu ft. So if you buy 60lb bags, those do 1/2 cu ft each so you would need 16 of them. IF you buy 80lb bags (2/3 cu ft) you would need 12 bags.

User

### How many bags of concrete do I need for 40 square feet?

How Many Bags of Concrete do you Need?Bag SizePre-mix Bags Needed to Fill1/4 cu yd1/2 cu yd40 lb bags234560 lb bags153080 lb bags1223

User

### How many bags of concrete do I need for a vinyl fence post?

How Much Concrete per Vinyl Fence Post?Post SizePost Height (above surface)80lb Bags Required4×43-4ft double-triple rail9 inch hole15×53-4ft double-triple rail12 inch hole15×55-6ft semi & privacy122

Guest

### How much concrete do I need for 10 sonotube?

For example, a sono tube with a 10" diameter and a 4' depth requires 0.08 cubic yards of concrete.

Guest

### How much concrete do I need for 6x6 post?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground. The diameter of your post hole should be three times the diameter of your post.

Guest

### How much concrete do I need for a 4 foot sonotube?

For example, a sono tube with a 10" diameter and a 4' depth requires 0.08 cubic yards of concrete..

Guest

### How much concrete do I need for a flagpole?

The depth of the hole should be 1/3-1/4 the post height above ground (i.e., a 6-foot tall would require a hole depth of at least 2 feet).

Guest

### How much concrete do I need for a steel fence post?

Most fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place.

The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post.

Depth of the hole is one-third to half the above ground height of the fence post..

Guest

### How much concrete do I need for an inground pool?

Plan on at least 5 minutes per cubic yard, for unloading time. How much concrete do I need? Order this much concrete, for these standard pool sizes. 12 x 24 – 5 yards, 14 x 28 – 6 yards, 16 x 32 – 7 yards, 18 x 36 – 8 yards and a 20 x 40 – 9 yards.

Guest

### How much concrete do I need for post holes?

Calculate Concrete Volume With the volume of the submerged post and the volume of the hole figured out, subtract the post volume from the hole volume, and you will have the volume of concrete needed for each hole.

Simply multiply that amount times the number of posts to get a total quantity..

Guest

### How much concrete is in a post hole?

The general rule of thumb when setting a post is that the depth of the post's hole needs to be 1/3 to 1/2 of the actual above-ground height of the post. So, six-foot-high fence posts ideally need to be buried three feet into the ground.

Guest

### How thick of concrete do you need for a 2-post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience.

Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed..

Guest

### How thick should concrete be for 2 post lift?

4 inchesHere are our tips for making sure your installation is an uplifting experience. Some of manufacturers standards for a 2-Post and 4-Post Lifts require a minimum 4 inches of reinforced concrete slab to be safely installed.

Guest

### How much sand and cement do I need to plaster a wall?

To plaster 100 square metres (15 millimeters thick) you will need: 14 bags cement + 2,25 cubic metres sand. Using masonry cement complying with SANS 50413 class MC 12,5X. To plaster 100 square metres (15 millimeters thick) you will need: 20 bags cement + 2 cubic metres sand.

Guest

### How many bags of concrete do I need for a fence post hole?

1 - 4 bagsMost fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

Guest

### How much cement do I need for a mailbox post?

In most cases a 50-pound bag of quick-dry concrete should suffice. Saturate the concrete. For a 50-pound bag you will need about a gallon of water. Be sure to leave support beams in place for 4 to 6 hours or until concrete is dry.

Guest

### How much concrete do I need for basketball hoop?

A hole that's 2 feet long, 2 feet wide and 2 feet deep is 8 cubic feet. Multiply the cubic feet by . 45, if you're using 60-pound bags of concrete, or by . 6, if you're using 80-pound bags.

Guest

### How many bags of cement do I need for M25 concrete?

Cement, Sand and aggregate requirement for Different grade concreteGrade of ConcreteNominal Mix ProportionCement Required (bag)/cumM151:3:64.5M201:2:46M251:1.75:3.56.75M301:1.5:37.5

Guest

### How much concrete do I need for 1m3?

Various instructions and regulations therefore also state that you need about 56 packs of dry concrete of 40kg each for 1m³, which results in about 17.86 litres of liquid concrete per pack.

Guest

### How much concrete do I need for Paver molds?

For a customized look, purchase powdered cement coloring to add to the concrete mixture. Here's how we made our lovely walkway with the mold. Determine the amount of concrete material needed for the project. Quikrete recommends one 80-pound bag of concrete for every 2 feet of walkway.

Guest

### How much cement and sand do I need for floor tiles?

Mortar calculation for tile flooring We need 1.5 m3 volume of wet cement mortar that means, we need this much volume after adding water to cement and sand mix. Dry volume of mortar is considered as 25% of more of wet volume.

Guest

### How much concrete do I need for a post hole?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Guest

### How much concrete is in a fence hole?

Also 1-1/2 bags per hole is about right for a 4x4 fence post. Also remember, the depth of the post hole should be one-half of the above-ground post height. (Example: For a 6' above ground post, use a post with an overall height of 9 feet and place 3 feet in the ground).

Guest

### How many bags of sand and cement do I need for a patio?

2 Answers from MyBuilder Landscape Gardeners You need approximately 0.75 cubic metres of gear. A ton bag of sharp sand is around 0.5 cubic metres so 2 bags will be plenty and 10 cement.

Guest

### How much concrete do I need for fence posts?

To calculate how much concrete you need, you need to know the post size you are going to use and how many posts you are installing. Your post diameter and height determine how big each hole needs to be. As stated above, fence post holes should be 3 times the diameter of your post and 1⁄3 as deep as your post.

Guest

### How many bags of concrete do I need for 2 yards?

The number of bags you need will vary depending on the type of concrete mix you choose for your project. If you're using 50lb bags of concrete, you'll need 72 bags to make a yard. If you're using 60lb bags of concrete, you'll need 60 bags to make a yard.

Guest

### How many concrete stamps do I need?

How many stamps do I need for my project? Take your dimensions of your project and figure out which direction you will run your stamps. Next measure what your longest run will be. Ideally you want the enough stamps to cover your first row and 2 stamps for the second row.

Guest

### How much cement sand and gravel do I need?

An average 1:2:3 mix contains one part cement, two parts sand and three parts gravel. To make 1 cubic yard of concrete, you'd need seven 94-pound bags of cement, about 1/2 cubic yard of sand and just over 3/4 cubic yard of gravel. The amount of water you use depends on how wet the sand is.

Guest

### How much concrete do I need for a 20x20 pad?

Concrete Slab Prices By SizeSlab SizeSquare FeetAverage Cost Installed15x15225\$1,38820x20400\$2,46824x24576\$3,55420x30600\$3,7026 more rows

Guest

### How much Venetian plaster do I need?

BUDGET: You can achieve a homemade Venetian plaster finish for roughly \$6 to \$11 per 100 square feet, considering you'll need \$2 to \$3 for pre-mixed joint compound, \$0.10 to \$0.50 for latex colorant, and \$4 to \$7 for tinted glaze.

Guest

### How do I keep my fence post straight when concrete is set?

Setting the Post You need to level it in two directions with a 4-foot level. After getting it straight in the first direction, hold one of the braces against the post and drive a single screw to connect the brace to the post. You can then level and brace the post in the other direction and begin filling the hole.

Guest

### How much concrete do I need for a 10 sonotube?

For example, a sono tube with a 10" diameter and a 4' depth requires 0.08 cubic yards of concrete.

Guest

### How do I figure out how many yards of concrete I need for a slab?

How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards.

Guest

### How do I figure out how many yards of concrete I need?

How do I calculate how much concrete I need for a slab?Measure the area in feet.Multiply length by width, and then by thickness.Divide the resulting number by 27 to find cubic yards..

Guest

### How much sand and cement do I need for 1 cubic meter of concrete?

1 Cubic Meter of Concrete 1m3 of concrete = 150l water + 250kg cement + 700kg sand + 1200kg aggregates.

Guest

### How many bags of cement do I need for a fence post?

1 - 4 bagsMost fence post holes will need between 1 - 4 bags of concrete to securely hold the post in place. The best way to determine the size of the hole is: Diameter of the hole is 3 times the width of the fence post. Depth of the hole is one-third to half the above ground height of the fence post.

Guest

### How many bags of cement do I need to build a two bedroom house?

For a medium size of a 2 bedroom flat, it will take 2,200 blocks and 125 bags of cement.

Guest

### How many bags of cement do I need to plaster a 2 bedroom flat?

16 bagsHow Many Bags Of Cement And Sand Will Plaster 2 Bedroom Flat? For a 2 bedroom flat, you'll need 16 bags of cement along with 1 20 tonnes trip of sharp sand (you'll have a remainder. You'll need some red sand too.